Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vinod.koul@intel.com>
To: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Cc: alsa-devel@alsa-project.org,
	pierre-louis.bossart@linux.jf.intel.com,
	vinod.koul@linux.jf.intel.com
Subject: Re: [TINYCOMPRESS][PATCH 1/1] compress: Add support for capture streams
Date: Fri, 26 Apr 2013 22:18:59 +0530	[thread overview]
Message-ID: <20130426164859.GG24632@intel.com> (raw)
In-Reply-To: <20130426151422.GA29257@opensource.wolfsonmicro.com>

On Fri, Apr 26, 2013 at 04:14:22PM +0100, Richard Fitzgerald wrote:
> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> ---
>  compress.c                          |   64 +++++++++++++++++++++++++++++++---
>  include/tinycompress/tinycompress.h |    2 +-
>  2 files changed, 59 insertions(+), 7 deletions(-)
Applied thanks, now where is crecord :-)

--
~Vinod
> 
> diff --git a/compress.c b/compress.c
> index 86cca88..e80e598 100644
> --- a/compress.c
> +++ b/compress.c
> @@ -240,13 +240,12 @@ struct compress *compress_open(unsigned int card, unsigned int device,
>  		oops(&bad_compress, -EINVAL, "can't deduce device direction from given flags");
>  		goto config_fail;
>  	}
> +
>  	if (flags & COMPRESS_OUT) {
> -		/* this should be removed once we have capture tested */
> -		oops(&bad_compress, -EINVAL, "this version doesnt support capture");
> -		goto config_fail;
> +		compress->fd = open(fn, O_RDONLY);
> +	} else {
> +		compress->fd = open(fn, O_WRONLY);
>  	}
> -
> -	compress->fd = open(fn, O_WRONLY);
>  	if (compress->fd < 0) {
>  		oops(&bad_compress, errno, "cannot open device '%s'", fn);
>  		goto config_fail;
> @@ -403,7 +402,60 @@ int compress_write(struct compress *compress, const void *buf, unsigned int size
>  
>  int compress_read(struct compress *compress, void *buf, unsigned int size)
>  {
> -	return oops(compress, -ENOTTY, "Not supported yet in lib");
> +	struct snd_compr_avail avail;
> +	struct pollfd fds;
> +	int to_read = 0;
> +	int num_read, total = 0, ret;
> +	char* cbuf = buf;
> +	const unsigned int frag_size = compress->config->fragment_size;
> +
> +	if (!(compress->flags & COMPRESS_OUT))
> +		return oops(compress, -EINVAL, "Invalid flag set");
> +	if (!is_compress_ready(compress))
> +		return oops(compress, -ENODEV, "device not ready");
> +	fds.fd = compress->fd;
> +	fds.events = POLLIN;
> +
> +	while (size) {
> +		if (ioctl(compress->fd, SNDRV_COMPRESS_AVAIL, &avail))
> +			return oops(compress, errno, "cannot get avail");
> +
> +		if ( (avail.avail < frag_size) && (avail.avail < size) ) {
> +			/* Less than one fragment available and not at the
> +			 * end of the read, so poll
> +			 */
> +			ret = poll(&fds, 1, compress->max_poll_wait_ms);
> +			/* A pause will cause -EBADFD or zero.
> +			 * This is not an error, just stop reading */
> +			if ((ret == 0) || (ret == -EBADFD))
> +				break;
> +			if (ret < 0)
> +				return oops(compress, errno, "poll error");
> +			if (fds.revents & POLLIN) {
> +				continue;
> +			}
> +			if (fds.revents & POLLERR) {
> +				return oops(compress, -EIO, "poll returned error!");
> +			}
> +		}
> +		/* read avail bytes */
> +		if (size > avail.avail)
> +			to_read = avail.avail;
> +		else
> +			to_read = size;
> +		num_read = read(compress->fd, cbuf, to_read);
> +		/* If play was paused the read returns -EBADFD */
> +		if (num_read == -EBADFD)
> +			break;
> +		if (num_read < 0)
> +			return oops(compress, errno, "read failed!");
> +
> +		size -= num_read;
> +		cbuf += num_read;
> +		total += num_read;
> +	}
> +
> +	return total;
>  }
>  
>  int compress_start(struct compress *compress)
> diff --git a/include/tinycompress/tinycompress.h b/include/tinycompress/tinycompress.h
> index ba9f3b6..9867afc 100644
> --- a/include/tinycompress/tinycompress.h
> +++ b/include/tinycompress/tinycompress.h
> @@ -76,7 +76,7 @@ struct compr_gapless_mdata {
>  	__u32 encoder_padding;
>  };
>  
> -#define COMPRESS_OUT        0x00000000
> +#define COMPRESS_OUT        0x20000000
>  #define COMPRESS_IN         0x10000000
>  
>  struct compress;
> -- 
> 1.7.2.5
> 
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

      reply	other threads:[~2013-04-26 17:21 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-26 15:14 [TINYCOMPRESS][PATCH 1/1] compress: Add support for capture streams Richard Fitzgerald
2013-04-26 16:48 ` Vinod Koul [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130426164859.GG24632@intel.com \
    --to=vinod.koul@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=pierre-louis.bossart@linux.jf.intel.com \
    --cc=rf@opensource.wolfsonmicro.com \
    --cc=vinod.koul@linux.jf.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox