Re: ALSA SOC Driver (mxs-wm8753)

[Mark Brown <broonie@kernel.org>]

[-- Attachment #1.1: Type: text/plain, Size: 955 bytes --]

On Mon, Mar 04, 2013 at 06:25:05PM +0000, John Graham wrote:

You should CC maintainers on e-mails, often things just on the list get
lost in the noise.

> The problem now is that the I2S data lines don't look right - the line
> from codec to TX28 looks like a (more-or-less) square wave with the
> same period as the I2S clock, but only going from ~3.1 - ~3.5 V, as
> opposed to the 0 - ~3.3 V I expect. Furthermore, it's a pretty regular
> square wave - it doesn't have all the breaks you see on a working I2S
> data line.

My immediate thought here is that you're probably seeing some sort of
electrical problem if the logic levels aren't being hit - normally this
is because both ends of the link are driving simultaneously.  I'd check
the pin mux settings on the SoC, probably in arch/arm, to make sure that
everything on the SoC is in the correct mode then check that the CPU is
configured as a slave (which sounds like the intended configuration).

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]