[PATCH] drm/i915: switch disable_power_well default value to 1

[PATCH] drm/i915: switch disable_power_well default value to 1

[Paulo Zanoni]

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

Now that the audio driver is using our power well API, everything
should be working correctly, so let's give it a try.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 33cb973..e6dc81c 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -123,10 +123,10 @@ module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 060
 MODULE_PARM_DESC(preliminary_hw_support,
 		"Enable preliminary hardware support. (default: false)");
 
-int i915_disable_power_well __read_mostly = 0;
+int i915_disable_power_well __read_mostly = 1;
 module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
 MODULE_PARM_DESC(disable_power_well,
-		 "Disable the power well when possible (default: false)");
+		 "Disable the power well when possible (default: true)");
 
 int i915_enable_ips __read_mostly = 1;
 module_param_named(enable_ips, i915_enable_ips, int, 0600);
-- 
1.8.1.2

Re: [Intel-gfx] [PATCH] drm/i915: switch disable_power_well default value to 1

[Daniel Vetter]

On Wed, Jul 03, 2013 at 05:12:13PM -0300, Paulo Zanoni wrote:
> From: Paulo Zanoni <paulo.r.zanoni@intel.com>
> 
> Now that the audio driver is using our power well API, everything
> should be working correctly, so let's give it a try.
> 
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Picked up for -fixes, thanks for the patch.
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch