From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
To: sameo@linux.intel.com, lee.jones@linaro.org,
ckeepax@opensource.wolfsonmicro.com, broonie@kernel.org,
lgirdwood@gmail.com, perex@perex.cz, tiwai@suse.de
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] mfd: arizona: Export function to control subsystem DVFS
Date: Mon, 9 Jun 2014 16:02:26 +0100 [thread overview]
Message-ID: <20140609150226.GB5229@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <20140609150013.GA5229@opensource.wolfsonmicro.com>
Moving this control from being a side-effect of the LDO1
regulator driver to a specific exported function.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-core.c | 84 ++++++++++++++++++++++++++++++++++++++
include/linux/mfd/arizona/core.h | 12 +++++
2 files changed, 96 insertions(+), 0 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 58e1fe5..a1b4fe6 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -94,6 +94,89 @@ int arizona_clk32k_disable(struct arizona *arizona)
}
EXPORT_SYMBOL_GPL(arizona_clk32k_disable);
+int arizona_dvfs_up(struct arizona *arizona, unsigned int mask)
+{
+ unsigned int new_flags;
+ int ret = 0;
+
+ mutex_lock(&arizona->subsys_max_lock);
+
+ new_flags = arizona->subsys_max_rq | mask;
+
+ if (arizona->subsys_max_rq != new_flags) {
+ switch (arizona->type) {
+ case WM5102:
+ case WM8997:
+ ret = regulator_set_voltage(arizona->dcvdd,
+ 1800000, 1800000);
+ if (ret != 0) {
+ dev_err(arizona->dev,
+ "Failed to raise dcvdd (%u)\n", ret);
+ goto err;
+ }
+
+ ret = regmap_update_bits(arizona->regmap,
+ ARIZONA_DYNAMIC_FREQUENCY_SCALING_1,
+ ARIZONA_SUBSYS_MAX_FREQ, 1);
+ if (ret != 0) {
+ dev_err(arizona->dev,
+ "Failed to enable subsys max (%u)\n",
+ ret);
+ regulator_set_voltage(arizona->dcvdd,
+ 1200000, 1800000);
+ goto err;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ arizona->subsys_max_rq = new_flags;
+ }
+err:
+ mutex_unlock(&arizona->subsys_max_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(arizona_dvfs_up);
+
+int arizona_dvfs_down(struct arizona *arizona, unsigned int mask)
+{
+ int ret = 0;
+
+ mutex_lock(&arizona->subsys_max_lock);
+
+ arizona->subsys_max_rq &= ~mask;
+
+ if (arizona->subsys_max_rq == 0) {
+ switch (arizona->type) {
+ case WM5102:
+ case WM8997:
+ ret = regmap_update_bits(arizona->regmap,
+ ARIZONA_DYNAMIC_FREQUENCY_SCALING_1,
+ ARIZONA_SUBSYS_MAX_FREQ, 0);
+ if (ret != 0)
+ dev_err(arizona->dev,
+ "Failed to disable subsys max (%u)\n",
+ ret);
+
+ ret = regulator_set_voltage(arizona->dcvdd,
+ 1200000, 1800000);
+ if (ret != 0)
+ dev_err(arizona->dev,
+ "Failed to lower dcvdd (%u)\n", ret);
+ break;
+
+ default:
+ break;
+ }
+ }
+
+ mutex_unlock(&arizona->subsys_max_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(arizona_dvfs_down);
+
static irqreturn_t arizona_clkgen_err(int irq, void *data)
{
struct arizona *arizona = data;
@@ -645,6 +728,7 @@ int arizona_dev_init(struct arizona *arizona)
dev_set_drvdata(arizona->dev, arizona);
mutex_init(&arizona->clk_lock);
+ mutex_init(&arizona->subsys_max_lock);
if (dev_get_platdata(arizona->dev))
memcpy(&arizona->pdata, dev_get_platdata(arizona->dev),
diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h
index 76564af..b4b8a7e 100644
--- a/include/linux/mfd/arizona/core.h
+++ b/include/linux/mfd/arizona/core.h
@@ -132,11 +132,23 @@ struct arizona {
struct mutex clk_lock;
int clk32k_ref;
+ struct mutex subsys_max_lock;
+ unsigned int subsys_max_rq;
+
struct snd_soc_dapm_context *dapm;
};
+#define ARIZONA_DVFS_SR1_RQ 0x00000001
+#define ARIZONA_DVFS_SR2_RQ 0x00000002
+#define ARIZONA_DVFS_SR3_RQ 0x00000004
+#define ARIZONA_DVFS_ASR1_RQ 0x00000010
+#define ARIZONA_DVFS_ASR2_RQ 0x00000020
+#define ARIZONA_DVFS_ADSP1_RQ 0x00010000
+
int arizona_clk32k_enable(struct arizona *arizona);
int arizona_clk32k_disable(struct arizona *arizona);
+int arizona_dvfs_up(struct arizona *arizona, unsigned int mask);
+int arizona_dvfs_down(struct arizona *arizona, unsigned int mask);
int arizona_request_irq(struct arizona *arizona, int irq, char *name,
irq_handler_t handler, void *data);
--
1.7.2.5
next prev parent reply other threads:[~2014-06-09 15:02 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-09 15:00 [PATCH 0/4] arizona: Improvements to codec DVFS control Richard Fitzgerald
2014-06-09 15:02 ` Richard Fitzgerald [this message]
2014-06-16 16:42 ` [PATCH 1/4] mfd: arizona: Export function to control subsystem DVFS Lee Jones
2014-06-16 16:48 ` Mark Brown
2014-06-16 17:09 ` Charles Keepax
2014-06-16 17:06 ` Charles Keepax
2014-06-09 15:03 ` [PATCH 2/4] ASoC: wm_adsp: Move DVFS control into codec driver Richard Fitzgerald
2014-06-11 10:54 ` Charles Keepax
2014-06-09 15:03 ` [PATCH 3/4] ASoC: arizona: Add DVFS handling for sample rate control Richard Fitzgerald
2014-06-09 15:04 ` [PATCH 4/4] regulator: arizona-ldo1: Do not control clocking from regulator Richard Fitzgerald
2014-06-09 18:43 ` Mark Brown
2014-06-11 10:59 ` Charles Keepax
2014-06-11 13:54 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140609150226.GB5229@opensource.wolfsonmicro.com \
--to=rf@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=perex@perex.cz \
--cc=sameo@linux.intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).