alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Cc: alsa-devel@alsa-project.org, sameo@linux.intel.com,
	broonie@linaro.org, tiwai@suse.de, linux-kernel@vger.kernel.org,
	patches@opensource.wolfsonmicro.com, lgirdwood@gmail.com
Subject: Re: [PATCH 1/3 v4 RESEND] mfd: arizona: Export function to control subsystem DVFS
Date: Thu, 21 Aug 2014 11:40:51 +0100	[thread overview]
Message-ID: <20140821104051.GW4266@lee--X1> (raw)
In-Reply-To: <20140808133233.GA2665@opensource.wolfsonmicro.com>

On Fri, 08 Aug 2014, Richard Fitzgerald wrote:

> From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> 
> Moving this control from being a side-effect of the LDO1
> regulator driver to a specific exported function.
> 
> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
>  drivers/mfd/arizona-core.c       |   89 ++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/arizona/core.h |   12 +++++
>  2 files changed, 101 insertions(+), 0 deletions(-)

If this is the same patch I reviewed before:

  Acked-by: Lee Jones <lee.jones@linaro.org>

I guess we're just waiting for maintainer Acks before I can apply the
set.

> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index cfc191a..04cde4b 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -94,6 +94,94 @@ int arizona_clk32k_disable(struct arizona *arizona)
>  }
>  EXPORT_SYMBOL_GPL(arizona_clk32k_disable);
>  
> +int arizona_dvfs_up(struct arizona *arizona, unsigned int flags)
> +{
> +	unsigned int new_flags;
> +	int ret = 0;
> +
> +	mutex_lock(&arizona->subsys_max_lock);
> +
> +	new_flags = arizona->subsys_max_rq | flags;
> +
> +	if (arizona->subsys_max_rq != new_flags) {
> +		switch (arizona->type) {
> +		case WM5102:
> +		case WM8997:
> +			ret = regulator_set_voltage(arizona->dcvdd,
> +						    1800000, 1800000);
> +			if (ret != 0) {
> +				dev_err(arizona->dev,
> +					"Failed to set DCVDD (DVFS up): %d\n",
> +					ret);
> +				goto err;
> +			}
> +
> +			ret = regmap_update_bits(arizona->regmap,
> +					ARIZONA_DYNAMIC_FREQUENCY_SCALING_1,
> +					ARIZONA_SUBSYS_MAX_FREQ, 1);
> +			if (ret != 0) {
> +				dev_err(arizona->dev,
> +					"Failed to enable subsys max: %d\n",
> +					ret);
> +				regulator_set_voltage(arizona->dcvdd,
> +						      1200000, 1800000);
> +				goto err;
> +			}
> +			break;
> +
> +		default:
> +			break;
> +		}
> +
> +		arizona->subsys_max_rq = new_flags;
> +	}
> +err:
> +	mutex_unlock(&arizona->subsys_max_lock);
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(arizona_dvfs_up);
> +
> +int arizona_dvfs_down(struct arizona *arizona, unsigned int flags)
> +{
> +	int ret = 0;
> +
> +	mutex_lock(&arizona->subsys_max_lock);
> +
> +	if ((arizona->subsys_max_rq & flags) != flags)
> +		dev_warn(arizona->dev, "Unbalanced DVFS down: %x\n", flags);
> +
> +	arizona->subsys_max_rq &= ~flags;
> +
> +	if (arizona->subsys_max_rq == 0) {
> +		switch (arizona->type) {
> +		case WM5102:
> +		case WM8997:
> +			ret = regmap_update_bits(arizona->regmap,
> +					ARIZONA_DYNAMIC_FREQUENCY_SCALING_1,
> +					ARIZONA_SUBSYS_MAX_FREQ, 0);
> +			if (ret != 0)
> +				dev_err(arizona->dev,
> +					"Failed to disable subsys max: %d\n",
> +					ret);
> +
> +			ret = regulator_set_voltage(arizona->dcvdd,
> +						    1200000, 1800000);
> +			if (ret != 0)
> +				dev_err(arizona->dev,
> +					"Failed to set DCVDD (DVFS down): %d\n",
> +					ret);
> +			break;
> +
> +		default:
> +			break;
> +		}
> +	}
> +
> +	mutex_unlock(&arizona->subsys_max_lock);
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(arizona_dvfs_down);
> +
>  static irqreturn_t arizona_clkgen_err(int irq, void *data)
>  {
>  	struct arizona *arizona = data;
> @@ -641,6 +729,7 @@ int arizona_dev_init(struct arizona *arizona)
>  
>  	dev_set_drvdata(arizona->dev, arizona);
>  	mutex_init(&arizona->clk_lock);
> +	mutex_init(&arizona->subsys_max_lock);
>  
>  	if (dev_get_platdata(arizona->dev))
>  		memcpy(&arizona->pdata, dev_get_platdata(arizona->dev),
> diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h
> index a614b33..4aec6a3 100644
> --- a/include/linux/mfd/arizona/core.h
> +++ b/include/linux/mfd/arizona/core.h
> @@ -109,6 +109,9 @@ struct arizona {
>  	struct mutex clk_lock;
>  	int clk32k_ref;
>  
> +	struct mutex subsys_max_lock;
> +	unsigned int subsys_max_rq;
> +
>  	struct snd_soc_dapm_context *dapm;
>  
>  	int tdm_width[ARIZONA_MAX_AIF];
> @@ -118,8 +121,17 @@ struct arizona {
>  	uint8_t dac_comp_enabled;
>  };
>  
> +#define ARIZONA_DVFS_SR1_RQ          0x00000001
> +#define ARIZONA_DVFS_SR2_RQ          0x00000002
> +#define ARIZONA_DVFS_SR3_RQ          0x00000004
> +#define ARIZONA_DVFS_ASR1_RQ         0x00000010
> +#define ARIZONA_DVFS_ASR2_RQ         0x00000020
> +#define ARIZONA_DVFS_ADSP1_RQ        0x00010000
> +
>  int arizona_clk32k_enable(struct arizona *arizona);
>  int arizona_clk32k_disable(struct arizona *arizona);
> +int arizona_dvfs_up(struct arizona *arizona, unsigned int mask);
> +int arizona_dvfs_down(struct arizona *arizona, unsigned int mask);
>  
>  int arizona_request_irq(struct arizona *arizona, int irq, char *name,
>  			irq_handler_t handler, void *data);

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  parent reply	other threads:[~2014-08-21 10:40 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-08 13:32 [PATCH 1/3 v4 RESEND] mfd: arizona: Export function to control subsystem DVFS Richard Fitzgerald
2014-08-08 13:34 ` [PATCH 2/3 v4 RESEND] ASoC: wm_adsp: Move DVFS control into codec driver Richard Fitzgerald
2014-08-08 13:35 ` [PATCH 3/3 v4 RESEND] ASoC: arizona: Add DVFS handling for sample rate control Richard Fitzgerald
2014-08-12 13:34   ` Charles Keepax
2014-08-12 15:57     ` Mark Brown
2014-08-21 10:40 ` Lee Jones [this message]
2014-08-25 10:15   ` [PATCH 1/3 v4 RESEND] mfd: arizona: Export function to control subsystem DVFS Richard Fitzgerald
2014-09-01 14:47 ` Richard Fitzgerald

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140821104051.GW4266@lee--X1 \
    --to=lee.jones@linaro.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=rf@opensource.wolfsonmicro.com \
    --cc=sameo@linux.intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).