* [PATCHv4 1/9] Clean WM8971 through checkpatch
@ 2014-09-17 8:41 Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 2/9] WM8971 modifies the control of deemphasis Xavier Hsu
` (8 more replies)
0 siblings, 9 replies; 14+ messages in thread
From: Xavier Hsu @ 2014-09-17 8:41 UTC (permalink / raw)
To: alsa-devel, patches, patches; +Cc: Xavier Hsu, ckeepax, lars, Andy Green
This patch improves WM8971.
We clean the file through checkpatch.
Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
---
Any comments about improving the patch are welcome.
Thanks.
sound/soc/codecs/wm8971.c | 108 +++++++++++++++++++++++----------------------
1 file changed, 56 insertions(+), 52 deletions(-)
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index 0499cd4..c0f7e9b 100644
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -31,7 +31,7 @@
#define WM8971_REG_COUNT 43
-static struct workqueue_struct *wm8971_workq = NULL;
+static struct workqueue_struct *wm8971_workq;
/* codec private data */
struct wm8971_priv {
@@ -92,25 +92,28 @@ static const struct reg_default wm8971_reg_defaults[] = {
#define wm8971_reset(c) snd_soc_write(c, WM8971_RESET, 0)
/* WM8971 Controls */
-static const char *wm8971_bass[] = { "Linear Control", "Adaptive Boost" };
-static const char *wm8971_bass_filter[] = { "130Hz @ 48kHz",
- "200Hz @ 48kHz" };
-static const char *wm8971_treble[] = { "8kHz", "4kHz" };
-static const char *wm8971_alc_func[] = { "Off", "Right", "Left", "Stereo" };
-static const char *wm8971_ng_type[] = { "Constant PGA Gain",
- "Mute ADC Output" };
-static const char *wm8971_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" };
-static const char *wm8971_mono_mux[] = {"Stereo", "Mono (Left)",
- "Mono (Right)", "Digital Mono"};
-static const char *wm8971_dac_phase[] = { "Non Inverted", "Inverted" };
-static const char *wm8971_lline_mux[] = {"Line", "NC", "NC", "PGA",
- "Differential"};
-static const char *wm8971_rline_mux[] = {"Line", "Mic", "NC", "PGA",
- "Differential"};
-static const char *wm8971_lpga_sel[] = {"Line", "NC", "NC", "Differential"};
-static const char *wm8971_rpga_sel[] = {"Line", "Mic", "NC", "Differential"};
-static const char *wm8971_adcpol[] = {"Normal", "L Invert", "R Invert",
- "L + R Invert"};
+static const char const *wm8971_bass[] = {"Linear Control", "Adaptive Boost"};
+static const char const *wm8971_bass_filter[] = {"130Hz @ 48kHz",
+ "200Hz @ 48kHz"};
+static const char const *wm8971_treble[] = {"8kHz", "4kHz"};
+static const char const *wm8971_alc_func[] = {"Off", "Right",
+ "Left", "Stereo"};
+static const char const *wm8971_ng_type[] = {"Constant PGA Gain",
+ "Mute ADC Output"};
+static const char const *wm8971_deemp[] = {"None", "32kHz", "44.1kHz", "48kHz"};
+static const char const *wm8971_mono_mux[] = {"Stereo", "Mono (Left)",
+ "Mono (Right)", "Digital Mono"};
+static const char const *wm8971_dac_phase[] = {"Non Inverted", "Inverted"};
+static const char const *wm8971_lline_mux[] = {"Line", "NC", "NC",
+ "PGA", "Differential"};
+static const char const *wm8971_rline_mux[] = {"Line", "Mic", "NC",
+ "PGA", "Differential"};
+static const char const *wm8971_lpga_sel[] = {"Line", "NC", "NC",
+ "Differential"};
+static const char const *wm8971_rpga_sel[] = {"Line", "Mic", "NC",
+ "Differential"};
+static const char const *wm8971_adcpol[] = {"Normal", "L Invert",
+ "R Invert", "L + R Invert"};
static const struct soc_enum wm8971_enum[] = {
SOC_ENUM_SINGLE(WM8971_BASS, 7, 2, wm8971_bass), /* 0 */
@@ -136,24 +139,24 @@ static const struct snd_kcontrol_new wm8971_snd_controls[] = {
SOC_DOUBLE_R("Capture Switch", WM8971_LINVOL, WM8971_RINVOL, 7, 1, 1),
SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8971_LOUT1V,
- WM8971_ROUT1V, 7, 1, 0),
+ WM8971_ROUT1V, 7, 1, 0),
SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8971_LOUT2V,
- WM8971_ROUT2V, 7, 1, 0),
+ WM8971_ROUT2V, 7, 1, 0),
SOC_SINGLE("Mono Playback ZC Switch", WM8971_MOUTV, 7, 1, 0),
SOC_DOUBLE_R("PCM Volume", WM8971_LDAC, WM8971_RDAC, 0, 255, 0),
SOC_DOUBLE_R("Bypass Left Playback Volume", WM8971_LOUTM1,
- WM8971_LOUTM2, 4, 7, 1),
+ WM8971_LOUTM2, 4, 7, 1),
SOC_DOUBLE_R("Bypass Right Playback Volume", WM8971_ROUTM1,
- WM8971_ROUTM2, 4, 7, 1),
+ WM8971_ROUTM2, 4, 7, 1),
SOC_DOUBLE_R("Bypass Mono Playback Volume", WM8971_MOUTM1,
- WM8971_MOUTM2, 4, 7, 1),
+ WM8971_MOUTM2, 4, 7, 1),
SOC_DOUBLE_R("Headphone Playback Volume", WM8971_LOUT1V,
- WM8971_ROUT1V, 0, 127, 0),
+ WM8971_ROUT1V, 0, 127, 0),
SOC_DOUBLE_R("Speaker Playback Volume", WM8971_LOUT2V,
- WM8971_ROUT2V, 0, 127, 0),
+ WM8971_ROUT2V, 0, 127, 0),
SOC_ENUM("Bass Boost", wm8971_enum[0]),
SOC_ENUM("Bass Filter", wm8971_enum[1]),
@@ -238,14 +241,14 @@ SOC_DAPM_ENUM("Route", wm8971_enum[13]);
static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
SND_SOC_DAPM_MIXER("Left Mixer", SND_SOC_NOPM, 0, 0,
- &wm8971_left_mixer_controls[0],
- ARRAY_SIZE(wm8971_left_mixer_controls)),
+ &wm8971_left_mixer_controls[0],
+ ARRAY_SIZE(wm8971_left_mixer_controls)),
SND_SOC_DAPM_MIXER("Right Mixer", SND_SOC_NOPM, 0, 0,
- &wm8971_right_mixer_controls[0],
- ARRAY_SIZE(wm8971_right_mixer_controls)),
+ &wm8971_right_mixer_controls[0],
+ ARRAY_SIZE(wm8971_right_mixer_controls)),
SND_SOC_DAPM_MIXER("Mono Mixer", WM8971_PWR2, 2, 0,
- &wm8971_mono_mixer_controls[0],
- ARRAY_SIZE(wm8971_mono_mixer_controls)),
+ &wm8971_mono_mixer_controls[0],
+ ARRAY_SIZE(wm8971_mono_mixer_controls)),
SND_SOC_DAPM_PGA("Right Out 2", WM8971_PWR2, 3, 0, NULL, 0),
SND_SOC_DAPM_PGA("Left Out 2", WM8971_PWR2, 4, 0, NULL, 0),
@@ -260,18 +263,18 @@ static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8971_PWR1, 3, 0),
SND_SOC_DAPM_MUX("Left PGA Mux", WM8971_PWR1, 5, 0,
- &wm8971_left_pga_controls),
+ &wm8971_left_pga_controls),
SND_SOC_DAPM_MUX("Right PGA Mux", WM8971_PWR1, 4, 0,
- &wm8971_right_pga_controls),
+ &wm8971_right_pga_controls),
SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
- &wm8971_left_line_controls),
+ &wm8971_left_line_controls),
SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
- &wm8971_right_line_controls),
+ &wm8971_right_line_controls),
SND_SOC_DAPM_MUX("Left ADC Mux", SND_SOC_NOPM, 0, 0,
- &wm8971_monomux_controls),
+ &wm8971_monomux_controls),
SND_SOC_DAPM_MUX("Right ADC Mux", SND_SOC_NOPM, 0, 0,
- &wm8971_monomux_controls),
+ &wm8971_monomux_controls),
SND_SOC_DAPM_OUTPUT("LOUT1"),
SND_SOC_DAPM_OUTPUT("ROUT1"),
@@ -431,7 +434,7 @@ static int get_coeff(int mclk, int rate)
}
static int wm8971_set_dai_sysclk(struct snd_soc_dai *codec_dai,
- int clk_id, unsigned int freq, int dir)
+ int clk_id, unsigned int freq, int dir)
{
struct snd_soc_codec *codec = codec_dai->codec;
struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
@@ -449,7 +452,7 @@ static int wm8971_set_dai_sysclk(struct snd_soc_dai *codec_dai,
}
static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai,
- unsigned int fmt)
+ unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
u16 iface = 0;
@@ -507,8 +510,8 @@ static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai,
}
static int wm8971_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_codec *codec = dai->codec;
struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
@@ -553,7 +556,7 @@ static int wm8971_mute(struct snd_soc_dai *dai, int mute)
}
static int wm8971_set_bias_level(struct snd_soc_codec *codec,
- enum snd_soc_bias_level level)
+ enum snd_soc_bias_level level)
{
u16 pwr_reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
@@ -580,11 +583,12 @@ static int wm8971_set_bias_level(struct snd_soc_codec *codec,
}
#define WM8971_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
- SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
- SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
+ SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
#define WM8971_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
- SNDRV_PCM_FMTBIT_S24_LE)
+ SNDRV_PCM_FMTBIT_S24_LE)
static const struct snd_soc_dai_ops wm8971_dai_ops = {
.hw_params = wm8971_pcm_hw_params,
@@ -616,6 +620,7 @@ static void wm8971_work(struct work_struct *work)
container_of(work, struct snd_soc_dapm_context,
delayed_work.work);
struct snd_soc_codec *codec = dapm->codec;
+
wm8971_set_bias_level(codec, codec->dapm.bias_level);
}
@@ -637,7 +642,7 @@ static int wm8971_resume(struct snd_soc_codec *codec)
snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
codec->dapm.bias_level = SND_SOC_BIAS_ON;
queue_delayed_work(wm8971_workq, &codec->dapm.delayed_work,
- msecs_to_jiffies(1000));
+ msecs_to_jiffies(1000));
}
return 0;
@@ -660,7 +665,7 @@ static int wm8971_probe(struct snd_soc_codec *codec)
snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
codec->dapm.bias_level = SND_SOC_BIAS_STANDBY;
queue_delayed_work(wm8971_workq, &codec->dapm.delayed_work,
- msecs_to_jiffies(1000));
+ msecs_to_jiffies(1000));
/* set the update bits */
snd_soc_update_bits(codec, WM8971_LDAC, 0x0100, 0x0100);
@@ -675,7 +680,6 @@ static int wm8971_probe(struct snd_soc_codec *codec)
return ret;
}
-
/* power down chip */
static int wm8971_remove(struct snd_soc_codec *codec)
{
@@ -729,8 +733,8 @@ static int wm8971_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, wm8971);
- ret = snd_soc_register_codec(&i2c->dev,
- &soc_codec_dev_wm8971, &wm8971_dai, 1);
+ ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm8971,
+ &wm8971_dai, 1);
return ret;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv4 2/9] WM8971 modifies the control of deemphasis
2014-09-17 8:41 [PATCHv4 1/9] Clean WM8971 through checkpatch Xavier Hsu
@ 2014-09-17 8:41 ` Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 3/9] WM8971 uses SOC_ENUM_SINGLE_DECL to replace SOC_ENUM_SINGLE Xavier Hsu
` (7 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Xavier Hsu @ 2014-09-17 8:41 UTC (permalink / raw)
To: alsa-devel, patches, patches; +Cc: Xavier Hsu, ckeepax, lars, Andy Green
This patch improves WM8971.
We modifies the control of deemphasis
Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
---
Any comments about improving the patch are welcome.
Thanks.
sound/soc/codecs/wm8971.c | 77 +++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 75 insertions(+), 2 deletions(-)
mode change 100644 => 100755 sound/soc/codecs/wm8971.c
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
old mode 100644
new mode 100755
index c0f7e9b..1b4f457
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -7,6 +7,10 @@
*
* Based on wm8753.c by Liam Girdwood
*
+ * WM8971 Improve Copyright (C) 2014 Linaro, Ltd
+ * Author: Xavier Hsu <xavier.hsu@linaro.org>
+ * Andy Green <andy.green@linaro.org>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -36,6 +40,11 @@ static struct workqueue_struct *wm8971_workq;
/* codec private data */
struct wm8971_priv {
unsigned int sysclk;
+
+ /* De-emphasis */
+ struct mutex deemph_mutex;
+ int playback_fs;
+ bool deemph;
};
/*
@@ -100,7 +109,6 @@ static const char const *wm8971_alc_func[] = {"Off", "Right",
"Left", "Stereo"};
static const char const *wm8971_ng_type[] = {"Constant PGA Gain",
"Mute ADC Output"};
-static const char const *wm8971_deemp[] = {"None", "32kHz", "44.1kHz", "48kHz"};
static const char const *wm8971_mono_mux[] = {"Stereo", "Mono (Left)",
"Mono (Right)", "Digital Mono"};
static const char const *wm8971_dac_phase[] = {"Non Inverted", "Inverted"};
@@ -114,6 +122,66 @@ static const char const *wm8971_rpga_sel[] = {"Line", "Mic", "NC",
"Differential"};
static const char const *wm8971_adcpol[] = {"Normal", "L Invert",
"R Invert", "L + R Invert"};
+static const char const *wm8971_deemp[] = {"None", "32kHz",
+ "44.1kHz", "48kHz"};
+
+static int wm8971_set_deemph(struct snd_soc_codec *codec)
+{
+ struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
+ int val = 0, i, best = 0;
+
+ /* If we're using deemphasis select the nearest available sample
+ * rate.
+ */
+ if (wm8971->deemph) {
+ best = 1;
+ for (i = 2; i < ARRAY_SIZE(wm8971_deemp); i++) {
+ if (abs(wm8971_deemp[i] - wm8971->playback_fs) <
+ abs(wm8971_deemp[best] - wm8971->playback_fs))
+ best = i;
+ }
+ val = best << 1;
+ }
+
+ dev_dbg(codec->dev, "Set deemphasis %d (%dHz)\n",
+ best, wm8971_deemp[best]);
+
+ return snd_soc_update_bits(codec, WM8971_ADCDAC, 0x6, val);
+}
+
+static int wm8971_get_deemph(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
+
+ ucontrol->value.enumerated.item[0] = wm8971->deemph;
+
+ return 0;
+}
+
+static int wm8971_put_deemph(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
+ int deemph = ucontrol->value.enumerated.item[0];
+ int ret = 0;
+
+ if (deemph > 1)
+ return -EINVAL;
+
+ mutex_lock(&wm8971->deemph_mutex);
+ if (wm8971->deemph != deemph) {
+ wm8971->deemph = deemph;
+ wm8971_set_deemph(codec);
+
+ ret = 1;
+ }
+ mutex_unlock(&wm8971->deemph_mutex);
+
+ return ret;
+}
static const struct soc_enum wm8971_enum[] = {
SOC_ENUM_SINGLE(WM8971_BASS, 7, 2, wm8971_bass), /* 0 */
@@ -184,7 +252,8 @@ static const struct snd_kcontrol_new wm8971_snd_controls[] = {
SOC_SINGLE("Capture 6dB Attenuate", WM8971_ADCDAC, 8, 1, 0),
SOC_SINGLE("Playback 6dB Attenuate", WM8971_ADCDAC, 7, 1, 0),
- SOC_ENUM("Playback De-emphasis", wm8971_enum[5]),
+ SOC_SINGLE_BOOL_EXT("Playback De-emphasis Switch", 0,
+ wm8971_get_deemph, wm8971_put_deemph),
SOC_ENUM("Playback Function", wm8971_enum[6]),
SOC_ENUM("Playback Phase", wm8971_enum[7]),
@@ -534,6 +603,8 @@ static int wm8971_pcm_hw_params(struct snd_pcm_substream *substream,
break;
}
+ wm8971_set_deemph(codec);
+
/* set iface & srate */
snd_soc_write(codec, WM8971_IFACE, iface);
if (coeff >= 0)
@@ -727,6 +798,8 @@ static int wm8971_i2c_probe(struct i2c_client *i2c,
if (wm8971 == NULL)
return -ENOMEM;
+ mutex_init(&wm8971->deemph_mutex);
+
regmap = devm_regmap_init_i2c(i2c, &wm8971_regmap);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv4 3/9] WM8971 uses SOC_ENUM_SINGLE_DECL to replace SOC_ENUM_SINGLE
2014-09-17 8:41 [PATCHv4 1/9] Clean WM8971 through checkpatch Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 2/9] WM8971 modifies the control of deemphasis Xavier Hsu
@ 2014-09-17 8:41 ` Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 4/9] WM8971 uses TLV information Xavier Hsu
` (6 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Xavier Hsu @ 2014-09-17 8:41 UTC (permalink / raw)
To: alsa-devel, patches, patches; +Cc: Xavier Hsu, ckeepax, lars, Andy Green
This patch improves WM8971.
We uses SOC_ENUM_SINGLE_DECL macro to
replace SOC_ENUM_SINGLE macro.
Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
---
Any comments about improving the patch are welcome.
Thanks.
sound/soc/codecs/wm8971.c | 63 +++++++++++++++++++++++++--------------------
1 file changed, 35 insertions(+), 28 deletions(-)
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index 1b4f457..22c8fcc 100755
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -183,22 +183,29 @@ static int wm8971_put_deemph(struct snd_kcontrol *kcontrol,
return ret;
}
-static const struct soc_enum wm8971_enum[] = {
- SOC_ENUM_SINGLE(WM8971_BASS, 7, 2, wm8971_bass), /* 0 */
- SOC_ENUM_SINGLE(WM8971_BASS, 6, 2, wm8971_bass_filter),
- SOC_ENUM_SINGLE(WM8971_TREBLE, 6, 2, wm8971_treble),
- SOC_ENUM_SINGLE(WM8971_ALC1, 7, 4, wm8971_alc_func),
- SOC_ENUM_SINGLE(WM8971_NGATE, 1, 2, wm8971_ng_type), /* 4 */
- SOC_ENUM_SINGLE(WM8971_ADCDAC, 1, 4, wm8971_deemp),
- SOC_ENUM_SINGLE(WM8971_ADCTL1, 4, 4, wm8971_mono_mux),
- SOC_ENUM_SINGLE(WM8971_ADCTL1, 1, 2, wm8971_dac_phase),
- SOC_ENUM_SINGLE(WM8971_LOUTM1, 0, 5, wm8971_lline_mux), /* 8 */
- SOC_ENUM_SINGLE(WM8971_ROUTM1, 0, 5, wm8971_rline_mux),
- SOC_ENUM_SINGLE(WM8971_LADCIN, 6, 4, wm8971_lpga_sel),
- SOC_ENUM_SINGLE(WM8971_RADCIN, 6, 4, wm8971_rpga_sel),
- SOC_ENUM_SINGLE(WM8971_ADCDAC, 5, 4, wm8971_adcpol), /* 12 */
- SOC_ENUM_SINGLE(WM8971_ADCIN, 6, 4, wm8971_mono_mux),
-};
+static const SOC_ENUM_SINGLE_DECL(bass_boost, WM8971_BASS, 7, wm8971_bass);
+static const SOC_ENUM_SINGLE_DECL(bass_filter, WM8971_BASS,
+ 6, wm8971_bass_filter);
+static const SOC_ENUM_SINGLE_DECL(treble_cutoff, WM8971_TREBLE,
+ 6, wm8971_treble);
+static const SOC_ENUM_SINGLE_DECL(alc_capture_func, WM8971_ALC1,
+ 7, wm8971_alc_func);
+static const SOC_ENUM_SINGLE_DECL(alc_capture_ngtype, WM8971_NGATE,
+ 1, wm8971_ng_type);
+static const SOC_ENUM_SINGLE_DECL(dac_mono_mix, WM8971_ADCTL1,
+ 4, wm8971_mono_mux);
+static const SOC_ENUM_SINGLE_DECL(dac_phase_inv, WM8971_ADCTL1,
+ 1, wm8971_dac_phase);
+static const SOC_ENUM_SINGLE_DECL(left_line, WM8971_LOUTM1,
+ 0, wm8971_lline_mux);
+static const SOC_ENUM_SINGLE_DECL(right_line, WM8971_ROUTM1,
+ 0, wm8971_rline_mux);
+static const SOC_ENUM_SINGLE_DECL(left_pga, WM8971_LADCIN, 6, wm8971_lpga_sel);
+static const SOC_ENUM_SINGLE_DECL(right_pga, WM8971_RADCIN,
+ 6, wm8971_rpga_sel);
+static const SOC_ENUM_SINGLE_DECL(capture_polarity, WM8971_ADCDAC,
+ 5, wm8971_adcpol);
+static const SOC_ENUM_SINGLE_DECL(monomux, WM8971_ADCIN, 6, wm8971_mono_mux);
static const struct snd_kcontrol_new wm8971_snd_controls[] = {
SOC_DOUBLE_R("Capture Volume", WM8971_LINVOL, WM8971_RINVOL, 0, 63, 0),
@@ -226,12 +233,12 @@ static const struct snd_kcontrol_new wm8971_snd_controls[] = {
SOC_DOUBLE_R("Speaker Playback Volume", WM8971_LOUT2V,
WM8971_ROUT2V, 0, 127, 0),
- SOC_ENUM("Bass Boost", wm8971_enum[0]),
- SOC_ENUM("Bass Filter", wm8971_enum[1]),
+ SOC_ENUM("Bass Boost", bass_boost),
+ SOC_ENUM("Bass Filter", bass_filter),
SOC_SINGLE("Bass Volume", WM8971_BASS, 0, 7, 1),
SOC_SINGLE("Treble Volume", WM8971_TREBLE, 0, 7, 0),
- SOC_ENUM("Treble Cut-off", wm8971_enum[2]),
+ SOC_ENUM("Treble Cut-off", treble_cutoff),
SOC_SINGLE("Capture Filter Switch", WM8971_ADCDAC, 0, 1, 1),
@@ -240,13 +247,13 @@ static const struct snd_kcontrol_new wm8971_snd_controls[] = {
SOC_SINGLE("ALC Capture Target Volume", WM8971_ALC1, 0, 7, 0),
SOC_SINGLE("ALC Capture Max Volume", WM8971_ALC1, 4, 7, 0),
- SOC_ENUM("ALC Capture Function", wm8971_enum[3]),
+ SOC_ENUM("ALC Capture Function", alc_capture_func),
SOC_SINGLE("ALC Capture ZC Switch", WM8971_ALC2, 7, 1, 0),
SOC_SINGLE("ALC Capture Hold Time", WM8971_ALC2, 0, 15, 0),
SOC_SINGLE("ALC Capture Decay Time", WM8971_ALC3, 4, 15, 0),
SOC_SINGLE("ALC Capture Attack Time", WM8971_ALC3, 0, 15, 0),
SOC_SINGLE("ALC Capture NG Threshold", WM8971_NGATE, 3, 31, 0),
- SOC_ENUM("ALC Capture NG Type", wm8971_enum[4]),
+ SOC_ENUM("ALC Capture NG Type", alc_capture_ngtype),
SOC_SINGLE("ALC Capture NG Switch", WM8971_NGATE, 0, 1, 0),
SOC_SINGLE("Capture 6dB Attenuate", WM8971_ADCDAC, 8, 1, 0),
@@ -254,8 +261,8 @@ static const struct snd_kcontrol_new wm8971_snd_controls[] = {
SOC_SINGLE_BOOL_EXT("Playback De-emphasis Switch", 0,
wm8971_get_deemph, wm8971_put_deemph),
- SOC_ENUM("Playback Function", wm8971_enum[6]),
- SOC_ENUM("Playback Phase", wm8971_enum[7]),
+ SOC_ENUM("Playback Function", dac_mono_mix),
+ SOC_ENUM("Playback Phase", dac_phase_inv),
SOC_DOUBLE_R("Mic Boost", WM8971_LADCIN, WM8971_RADCIN, 4, 3, 0),
};
@@ -290,23 +297,23 @@ SOC_DAPM_SINGLE("Right Bypass Switch", WM8971_MOUTM2, 7, 1, 0),
/* Left Line Mux */
static const struct snd_kcontrol_new wm8971_left_line_controls =
-SOC_DAPM_ENUM("Route", wm8971_enum[8]);
+SOC_DAPM_ENUM("Route", left_line);
/* Right Line Mux */
static const struct snd_kcontrol_new wm8971_right_line_controls =
-SOC_DAPM_ENUM("Route", wm8971_enum[9]);
+SOC_DAPM_ENUM("Route", right_line);
/* Left PGA Mux */
static const struct snd_kcontrol_new wm8971_left_pga_controls =
-SOC_DAPM_ENUM("Route", wm8971_enum[10]);
+SOC_DAPM_ENUM("Route", left_pga);
/* Right PGA Mux */
static const struct snd_kcontrol_new wm8971_right_pga_controls =
-SOC_DAPM_ENUM("Route", wm8971_enum[11]);
+SOC_DAPM_ENUM("Route", right_pga);
/* Mono ADC Mux */
static const struct snd_kcontrol_new wm8971_monomux_controls =
-SOC_DAPM_ENUM("Route", wm8971_enum[13]);
+SOC_DAPM_ENUM("Route", monomux);
static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
SND_SOC_DAPM_MIXER("Left Mixer", SND_SOC_NOPM, 0, 0,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv4 4/9] WM8971 uses TLV information
2014-09-17 8:41 [PATCHv4 1/9] Clean WM8971 through checkpatch Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 2/9] WM8971 modifies the control of deemphasis Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 3/9] WM8971 uses SOC_ENUM_SINGLE_DECL to replace SOC_ENUM_SINGLE Xavier Hsu
@ 2014-09-17 8:41 ` Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 5/9] Improve wm8971_set_dai_fmt Xavier Hsu
` (5 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Xavier Hsu @ 2014-09-17 8:41 UTC (permalink / raw)
To: alsa-devel, patches, patches; +Cc: Xavier Hsu, ckeepax, lars, Andy Green
This patch improves WM8971.
We use TLV information.
Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
---
Any comments about improving the patch are welcome.
Thanks.
sound/soc/codecs/wm8971.c | 57 +++++++++++++++++++++++++++++++--------------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index 22c8fcc..c2ebc77 100755
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -30,6 +30,7 @@
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/initval.h>
+#include <sound/tlv.h>
#include "wm8971.h"
@@ -207,8 +208,19 @@ static const SOC_ENUM_SINGLE_DECL(capture_polarity, WM8971_ADCDAC,
5, wm8971_adcpol);
static const SOC_ENUM_SINGLE_DECL(monomux, WM8971_ADCIN, 6, wm8971_mono_mux);
+static const DECLARE_TLV_DB_SCALE(in_vol, -1725, 75, 0);
+static const DECLARE_TLV_DB_SCALE(out_vol, -6700, 91, 0);
+static const DECLARE_TLV_DB_SCALE(attenuate_6db, -600, 600, 0);
+static const DECLARE_TLV_DB_SCALE(dac_vol, -12700, 50, 0);
+static const DECLARE_TLV_DB_SCALE(tone_vol, -600, 150, 0);
+static const DECLARE_TLV_DB_SCALE(alc_tar_vol, -2850, 150, 0);
+static const DECLARE_TLV_DB_SCALE(alc_max_vol, -1200, 600, 0);
+static const DECLARE_TLV_DB_SCALE(adc_vol, -9700, 50, 0);
+static const DECLARE_TLV_DB_SCALE(bypass_out_vol, -1500, 300, 0);
+
static const struct snd_kcontrol_new wm8971_snd_controls[] = {
- SOC_DOUBLE_R("Capture Volume", WM8971_LINVOL, WM8971_RINVOL, 0, 63, 0),
+ SOC_DOUBLE_R_TLV("Capture Volume", WM8971_LINVOL, WM8971_RINVOL,
+ 0, 63, 0, in_vol),
SOC_DOUBLE_R("Capture ZC Switch", WM8971_LINVOL, WM8971_RINVOL,
6, 1, 0),
SOC_DOUBLE_R("Capture Switch", WM8971_LINVOL, WM8971_RINVOL, 7, 1, 1),
@@ -219,31 +231,35 @@ static const struct snd_kcontrol_new wm8971_snd_controls[] = {
WM8971_ROUT2V, 7, 1, 0),
SOC_SINGLE("Mono Playback ZC Switch", WM8971_MOUTV, 7, 1, 0),
- SOC_DOUBLE_R("PCM Volume", WM8971_LDAC, WM8971_RDAC, 0, 255, 0),
+ SOC_DOUBLE_R_TLV("PCM Volume", WM8971_LDAC, WM8971_RDAC,
+ 0, 255, 0, dac_vol),
- SOC_DOUBLE_R("Bypass Left Playback Volume", WM8971_LOUTM1,
- WM8971_LOUTM2, 4, 7, 1),
- SOC_DOUBLE_R("Bypass Right Playback Volume", WM8971_ROUTM1,
- WM8971_ROUTM2, 4, 7, 1),
- SOC_DOUBLE_R("Bypass Mono Playback Volume", WM8971_MOUTM1,
- WM8971_MOUTM2, 4, 7, 1),
+ SOC_DOUBLE_R_TLV("Bypass Left Playback Volume", WM8971_LOUTM1,
+ WM8971_LOUTM2, 4, 7, 1, bypass_out_vol),
+ SOC_DOUBLE_R_TLV("Bypass Right Playback Volume", WM8971_ROUTM1,
+ WM8971_ROUTM2, 4, 7, 1, bypass_out_vol),
+ SOC_DOUBLE_R_TLV("Bypass Mono Playback Volume", WM8971_MOUTM1,
+ WM8971_MOUTM2, 4, 7, 1, bypass_out_vol),
- SOC_DOUBLE_R("Headphone Playback Volume", WM8971_LOUT1V,
- WM8971_ROUT1V, 0, 127, 0),
- SOC_DOUBLE_R("Speaker Playback Volume", WM8971_LOUT2V,
- WM8971_ROUT2V, 0, 127, 0),
+ SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8971_LOUT1V,
+ WM8971_ROUT1V, 0, 127, 0, out_vol),
+ SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8971_LOUT2V,
+ WM8971_ROUT2V, 0, 127, 0, out_vol),
+ SOC_SINGLE_TLV("Mono Playback Volume", WM8971_MOUTV,
+ 0, 127, 0, out_vol),
SOC_ENUM("Bass Boost", bass_boost),
SOC_ENUM("Bass Filter", bass_filter),
- SOC_SINGLE("Bass Volume", WM8971_BASS, 0, 7, 1),
+ SOC_SINGLE_TLV("Bass Volume", WM8971_BASS, 0, 15, 1, tone_vol),
- SOC_SINGLE("Treble Volume", WM8971_TREBLE, 0, 7, 0),
+ SOC_SINGLE_TLV("Treble Volume", WM8971_TREBLE, 0, 15, 0, tone_vol),
SOC_ENUM("Treble Cut-off", treble_cutoff),
SOC_SINGLE("Capture Filter Switch", WM8971_ADCDAC, 0, 1, 1),
- SOC_SINGLE("ALC Target Volume", WM8971_ALC1, 0, 7, 0),
- SOC_SINGLE("ALC Max Volume", WM8971_ALC1, 4, 7, 0),
+ SOC_SINGLE_TLV("ALC Target Volume", WM8971_ALC1,
+ 0, 15, 0, alc_tar_vol),
+ SOC_SINGLE_TLV("ALC Max Volume", WM8971_ALC1, 4, 7, 0, alc_max_vol),
SOC_SINGLE("ALC Capture Target Volume", WM8971_ALC1, 0, 7, 0),
SOC_SINGLE("ALC Capture Max Volume", WM8971_ALC1, 4, 7, 0),
@@ -256,8 +272,10 @@ static const struct snd_kcontrol_new wm8971_snd_controls[] = {
SOC_ENUM("ALC Capture NG Type", alc_capture_ngtype),
SOC_SINGLE("ALC Capture NG Switch", WM8971_NGATE, 0, 1, 0),
- SOC_SINGLE("Capture 6dB Attenuate", WM8971_ADCDAC, 8, 1, 0),
- SOC_SINGLE("Playback 6dB Attenuate", WM8971_ADCDAC, 7, 1, 0),
+ SOC_SINGLE_TLV("Capture 6dB Attenuate", WM8971_ADCDAC,
+ 8, 1, 0, attenuate_6db),
+ SOC_SINGLE_TLV("Playback 6dB Attenuate", WM8971_ADCDAC,
+ 7, 1, 0, attenuate_6db),
SOC_SINGLE_BOOL_EXT("Playback De-emphasis Switch", 0,
wm8971_get_deemph, wm8971_put_deemph),
@@ -265,6 +283,9 @@ static const struct snd_kcontrol_new wm8971_snd_controls[] = {
SOC_ENUM("Playback Phase", dac_phase_inv),
SOC_DOUBLE_R("Mic Boost", WM8971_LADCIN, WM8971_RADCIN, 4, 3, 0),
+
+ SOC_DOUBLE_R_TLV("ADC Volume", WM8971_LADC, WM8971_RADC,
+ 0, 255, 0, adc_vol),
};
/*
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv4 5/9] Improve wm8971_set_dai_fmt
2014-09-17 8:41 [PATCHv4 1/9] Clean WM8971 through checkpatch Xavier Hsu
` (2 preceding siblings ...)
2014-09-17 8:41 ` [PATCHv4 4/9] WM8971 uses TLV information Xavier Hsu
@ 2014-09-17 8:41 ` Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 6/9] Using the constraint based on wm8971_set_dai_sysclk Xavier Hsu
` (4 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Xavier Hsu @ 2014-09-17 8:41 UTC (permalink / raw)
To: alsa-devel, patches, patches; +Cc: Xavier Hsu, ckeepax, lars, Andy Green
This patch improves WM8971.
We modify the function of wm8971_set_dai_fmt().
Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
---
Any comments about improving the patch are welcome.
Thanks.
sound/soc/codecs/wm8971.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index c2ebc77..7021f77 100755
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -552,12 +552,11 @@ static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- u16 iface = 0;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
- iface = 0x0040;
+ snd_soc_update_bits(codec, WM8971_IFACE, 0x0040, 0x0040);
break;
case SND_SOC_DAIFMT_CBS_CFS:
break;
@@ -568,18 +567,18 @@ static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai,
/* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
- iface |= 0x0002;
+ snd_soc_update_bits(codec, WM8971_IFACE, 0x0002, 0x0002);
break;
case SND_SOC_DAIFMT_RIGHT_J:
break;
case SND_SOC_DAIFMT_LEFT_J:
- iface |= 0x0001;
+ snd_soc_update_bits(codec, WM8971_IFACE, 0x0001, 0x0001);
break;
case SND_SOC_DAIFMT_DSP_A:
- iface |= 0x0003;
+ snd_soc_update_bits(codec, WM8971_IFACE, 0x0003, 0x0003);
break;
case SND_SOC_DAIFMT_DSP_B:
- iface |= 0x0013;
+ snd_soc_update_bits(codec, WM8971_IFACE, 0x0013, 0x0013);
break;
default:
return -EINVAL;
@@ -590,19 +589,18 @@ static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai,
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_IF:
- iface |= 0x0090;
+ snd_soc_update_bits(codec, WM8971_IFACE, 0x0090, 0x0090);
break;
case SND_SOC_DAIFMT_IB_NF:
- iface |= 0x0080;
+ snd_soc_update_bits(codec, WM8971_IFACE, 0x0080, 0x0080);
break;
case SND_SOC_DAIFMT_NB_IF:
- iface |= 0x0010;
+ snd_soc_update_bits(codec, WM8971_IFACE, 0x0010, 0x0010);
break;
default:
return -EINVAL;
}
- snd_soc_write(codec, WM8971_IFACE, iface);
return 0;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv4 6/9] Using the constraint based on wm8971_set_dai_sysclk
2014-09-17 8:41 [PATCHv4 1/9] Clean WM8971 through checkpatch Xavier Hsu
` (3 preceding siblings ...)
2014-09-17 8:41 ` [PATCHv4 5/9] Improve wm8971_set_dai_fmt Xavier Hsu
@ 2014-09-17 8:41 ` Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 7/9] WM8971 uses msleep to replace work queue Xavier Hsu
` (3 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Xavier Hsu @ 2014-09-17 8:41 UTC (permalink / raw)
To: alsa-devel, patches, patches; +Cc: Xavier Hsu, ckeepax, lars, Andy Green
This patch improves WM8971.
We use the constraint based on the function of
wm8971_set_dai_sysclk().
Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
---
Any comments about improving the patch are welcome.
Thanks.
sound/soc/codecs/wm8971.c | 80 +++++++++++++++++++++++++++++++++++++++++----
1 file changed, 74 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index 7021f77..5b38c7a 100755
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -40,7 +40,9 @@ static struct workqueue_struct *wm8971_workq;
/* codec private data */
struct wm8971_priv {
+ /* MCLK */
unsigned int sysclk;
+ struct snd_pcm_hw_constraint_list *sysclk_constraints;
/* De-emphasis */
struct mutex deemph_mutex;
@@ -530,6 +532,35 @@ static int get_coeff(int mclk, int rate)
return -EINVAL;
}
+/* The set of rates we can generate from the above for each SYSCLK */
+static const unsigned int rates_48000[] = {
+ 8000, 12000, 16000, 24000, 32000, 48000, 96000
+};
+
+static struct snd_pcm_hw_constraint_list constraints_48000 = {
+ .count = ARRAY_SIZE(rates_48000),
+ .list = rates_48000,
+};
+
+static const unsigned int rates_44100[] = {
+ 8000, 11025, 22050, 44100, 88200
+};
+
+static struct snd_pcm_hw_constraint_list constraints_44100 = {
+ .count = ARRAY_SIZE(rates_44100),
+ .list = rates_44100,
+};
+
+static const unsigned int rates_12[] = {
+ 8000, 11025, 12000, 16000, 22050, 24000, 32000, 41100, 48000,
+ 88235, 96000,
+};
+
+static struct snd_pcm_hw_constraint_list constraints_12 = {
+ .count = ARRAY_SIZE(rates_12),
+ .list = rates_12,
+};
+
static int wm8971_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
{
@@ -537,15 +568,29 @@ static int wm8971_set_dai_sysclk(struct snd_soc_dai *codec_dai,
struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
switch (freq) {
- case 11289600:
- case 12000000:
case 12288000:
- case 16934400:
+ case 24576000:
case 18432000:
- wm8971->sysclk = freq;
- return 0;
+ case 36864000:
+ wm8971->sysclk_constraints = &constraints_48000;
+ break;
+ case 11289600:
+ case 22579200:
+ case 16934400:
+ case 33868800:
+ wm8971->sysclk_constraints = &constraints_44100;
+ break;
+ case 12000000:
+ case 24000000:
+ wm8971->sysclk_constraints = &constraints_12;
+ break;
+ default:
+ return -EINVAL;
}
- return -EINVAL;
+
+ wm8971->sysclk = freq;
+
+ return 0;
}
static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai,
@@ -604,6 +649,28 @@ static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai,
return 0;
}
+static int wm8971_pcm_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
+
+ /* The set of sample rates that can be supported depends on the
+ * MCLK supplied to the CODEC - enforce this.
+ */
+ if (!wm8971->sysclk) {
+ dev_err(codec->dev,
+ "No MCLK configured, call set_sysclk() on init\n");
+ return -EINVAL;
+ }
+
+ snd_pcm_hw_constraint_list(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ wm8971->sysclk_constraints);
+
+ return 0;
+}
+
static int wm8971_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
@@ -688,6 +755,7 @@ static int wm8971_set_bias_level(struct snd_soc_codec *codec,
SNDRV_PCM_FMTBIT_S24_LE)
static const struct snd_soc_dai_ops wm8971_dai_ops = {
+ .startup = wm8971_pcm_startup,
.hw_params = wm8971_pcm_hw_params,
.digital_mute = wm8971_mute,
.set_fmt = wm8971_set_dai_fmt,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv4 7/9] WM8971 uses msleep to replace work queue
2014-09-17 8:41 [PATCHv4 1/9] Clean WM8971 through checkpatch Xavier Hsu
` (4 preceding siblings ...)
2014-09-17 8:41 ` [PATCHv4 6/9] Using the constraint based on wm8971_set_dai_sysclk Xavier Hsu
@ 2014-09-17 8:41 ` Xavier Hsu
2014-09-22 12:16 ` Charles Keepax
2014-09-17 8:41 ` [PATCHv4 8/9] WM8971 uses regcache_sync to replace snd_soc_cache_sync Xavier Hsu
` (2 subsequent siblings)
8 siblings, 1 reply; 14+ messages in thread
From: Xavier Hsu @ 2014-09-17 8:41 UTC (permalink / raw)
To: alsa-devel, patches, patches; +Cc: Xavier Hsu, ckeepax, lars, Andy Green
This patch improves WM8971.
We use msleep to replace work queue.
"As suggested by Mark Brown"
Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
---
Any comments about improving the patch are welcome.
Thanks.
sound/soc/codecs/wm8971.c | 27 ++++-----------------------
1 file changed, 4 insertions(+), 23 deletions(-)
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index 5b38c7a..d081cae 100755
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -36,8 +36,6 @@
#define WM8971_REG_COUNT 43
-static struct workqueue_struct *wm8971_workq;
-
/* codec private data */
struct wm8971_priv {
/* MCLK */
@@ -779,16 +777,6 @@ static struct snd_soc_dai_driver wm8971_dai = {
.ops = &wm8971_dai_ops,
};
-static void wm8971_work(struct work_struct *work)
-{
- struct snd_soc_dapm_context *dapm =
- container_of(work, struct snd_soc_dapm_context,
- delayed_work.work);
- struct snd_soc_codec *codec = dapm->codec;
-
- wm8971_set_bias_level(codec, codec->dapm.bias_level);
-}
-
static int wm8971_suspend(struct snd_soc_codec *codec)
{
wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
@@ -806,8 +794,8 @@ static int wm8971_resume(struct snd_soc_codec *codec)
reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
codec->dapm.bias_level = SND_SOC_BIAS_ON;
- queue_delayed_work(wm8971_workq, &codec->dapm.delayed_work,
- msecs_to_jiffies(1000));
+ wm8971_set_bias_level(codec, codec->dapm.bias_level);
+ msleep(1000);
}
return 0;
@@ -818,19 +806,14 @@ static int wm8971_probe(struct snd_soc_codec *codec)
int ret = 0;
u16 reg;
- INIT_DELAYED_WORK(&codec->dapm.delayed_work, wm8971_work);
- wm8971_workq = create_workqueue("wm8971");
- if (wm8971_workq == NULL)
- return -ENOMEM;
-
wm8971_reset(codec);
/* charge output caps - set vmid to 5k for quick power up */
reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
codec->dapm.bias_level = SND_SOC_BIAS_STANDBY;
- queue_delayed_work(wm8971_workq, &codec->dapm.delayed_work,
- msecs_to_jiffies(1000));
+ wm8971_set_bias_level(codec, codec->dapm.bias_level);
+ msleep(1000);
/* set the update bits */
snd_soc_update_bits(codec, WM8971_LDAC, 0x0100, 0x0100);
@@ -850,8 +833,6 @@ static int wm8971_remove(struct snd_soc_codec *codec)
{
wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
- if (wm8971_workq)
- destroy_workqueue(wm8971_workq);
return 0;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv4 8/9] WM8971 uses regcache_sync to replace snd_soc_cache_sync
2014-09-17 8:41 [PATCHv4 1/9] Clean WM8971 through checkpatch Xavier Hsu
` (5 preceding siblings ...)
2014-09-17 8:41 ` [PATCHv4 7/9] WM8971 uses msleep to replace work queue Xavier Hsu
@ 2014-09-17 8:41 ` Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 9/9] ASOC add WM8973 support to WM8971 Xavier Hsu
2014-09-22 12:35 ` [PATCHv4 1/9] Clean WM8971 through checkpatch Charles Keepax
8 siblings, 0 replies; 14+ messages in thread
From: Xavier Hsu @ 2014-09-17 8:41 UTC (permalink / raw)
To: alsa-devel, patches, patches; +Cc: Xavier Hsu, ckeepax, lars, Andy Green
This patch improves WM8971.
We uses regcache_sync to replace snd_soc_cache_sync.
Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
---
Any comments about improving the patch are welcome.
Thanks.
sound/soc/codecs/wm8971.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index d081cae..6fecf2d 100755
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -38,6 +38,7 @@
/* codec private data */
struct wm8971_priv {
+ struct regmap *regmap;
/* MCLK */
unsigned int sysclk;
struct snd_pcm_hw_constraint_list *sysclk_constraints;
@@ -720,6 +721,7 @@ static int wm8971_mute(struct snd_soc_dai *dai, int mute)
static int wm8971_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
+ struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
u16 pwr_reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
switch (level) {
@@ -731,7 +733,7 @@ static int wm8971_set_bias_level(struct snd_soc_codec *codec,
break;
case SND_SOC_BIAS_STANDBY:
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF)
- snd_soc_cache_sync(codec);
+ regcache_sync(wm8971->regmap);
/* mute dac and set vmid to 500k, enable VREF */
snd_soc_write(codec, WM8971_PWR1, pwr_reg | 0x0140);
@@ -865,7 +867,6 @@ static int wm8971_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8971_priv *wm8971;
- struct regmap *regmap;
int ret;
wm8971 = devm_kzalloc(&i2c->dev, sizeof(struct wm8971_priv),
@@ -875,9 +876,9 @@ static int wm8971_i2c_probe(struct i2c_client *i2c,
mutex_init(&wm8971->deemph_mutex);
- regmap = devm_regmap_init_i2c(i2c, &wm8971_regmap);
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
+ wm8971->regmap = devm_regmap_init_i2c(i2c, &wm8971_regmap);
+ if (IS_ERR(wm8971->regmap))
+ return PTR_ERR(wm8971->regmap);
i2c_set_clientdata(i2c, wm8971);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv4 9/9] ASOC add WM8973 support to WM8971
2014-09-17 8:41 [PATCHv4 1/9] Clean WM8971 through checkpatch Xavier Hsu
` (6 preceding siblings ...)
2014-09-17 8:41 ` [PATCHv4 8/9] WM8971 uses regcache_sync to replace snd_soc_cache_sync Xavier Hsu
@ 2014-09-17 8:41 ` Xavier Hsu
2014-09-22 12:34 ` Charles Keepax
2014-09-22 12:35 ` [PATCHv4 1/9] Clean WM8971 through checkpatch Charles Keepax
8 siblings, 1 reply; 14+ messages in thread
From: Xavier Hsu @ 2014-09-17 8:41 UTC (permalink / raw)
To: alsa-devel, patches, patches; +Cc: Xavier Hsu, ckeepax, lars, Andy Green
This patch adds support for the wm8973 codec.
Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
---
Any comments about improving the patch are welcome.
Thanks.
Documentation/devicetree/bindings/sound/wm8971.txt | 42 +++
sound/soc/codecs/wm8971.c | 337 ++++++++++++++++----
sound/soc/codecs/wm8971.h | 21 +-
3 files changed, 331 insertions(+), 69 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/wm8971.txt
mode change 100644 => 100755 sound/soc/codecs/wm8971.h
diff --git a/Documentation/devicetree/bindings/sound/wm8971.txt b/Documentation/devicetree/bindings/sound/wm8971.txt
new file mode 100644
index 0000000..d8023d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8971.txt
@@ -0,0 +1,42 @@
+WM8971 and WM8973 audio CODEC
+
+These devices support both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8971".
+ "wlf,wm8973".
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Optional properties:
+
+ - mclk-div : Setting the CLKDIV2 bit for dividing MCLK.
+ mclk-div = <0> (Not divide & Default).
+ mclk-div = <1> (Divide by 2).
+
+ - anglouge-bias : Analogue Bias optimization
+ anglouge-bias = <0> (AVDD 1.8V)
+ anglouge-bias = <1> (AVDD 2.5V)
+ anglouge-bias = <2> (AVDD 3.3V & Default)
+
+ - headphone-en : Headphone Switch
+ headphone-en = <0> (Headphone switch disabled & Default)
+ headphone-en = <1> (Headphone switch enabled)
+
+ - headphone-pol : Headphone Switch Polarity
+ headphone-pol = <0> (HPDETECT high = headphone & Default)
+ headphone-pol = <1> (HPDETECT high = speaker)
+
+Example:
+
+codec: wm8973@1a {
+ compatible = "wlf,wm8973";
+ reg = <0x1a>;
+ mclk-div = <1>;
+ anglouge-bias = <0>;
+ headphone-en = <1>;
+ headphone-pol = <1>;
+};
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index 6fecf2d..e9c7ba6 100755
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -7,7 +7,7 @@
*
* Based on wm8753.c by Liam Girdwood
*
- * WM8971 Improve Copyright (C) 2014 Linaro, Ltd
+ * WM8971 Improve & Wm8973 Support Copyright (C) 2014 Linaro, Ltd
* Author: Xavier Hsu <xavier.hsu@linaro.org>
* Andy Green <andy.green@linaro.org>
*
@@ -34,19 +34,29 @@
#include "wm8971.h"
-#define WM8971_REG_COUNT 43
+enum variant {
+ VARIANT_WM8971,
+ VARIANT_WM8973
+};
+
+#define WM8971_REG_COUNT 43
/* codec private data */
struct wm8971_priv {
struct regmap *regmap;
+ enum variant variant;
/* MCLK */
unsigned int sysclk;
struct snd_pcm_hw_constraint_list *sysclk_constraints;
-
/* De-emphasis */
struct mutex deemph_mutex;
int playback_fs;
bool deemph;
+ /* From DT */
+ int mclk_div;
+ int anglouge_bias;
+ int headphone_en;
+ int headphone_pol;
};
/*
@@ -102,7 +112,7 @@ static const struct reg_default wm8971_reg_defaults[] = {
#define wm8971_reset(c) snd_soc_write(c, WM8971_RESET, 0)
-/* WM8971 Controls */
+/* WM8971 / 3 Controls */
static const char const *wm8971_bass[] = {"Linear Control", "Adaptive Boost"};
static const char const *wm8971_bass_filter[] = {"130Hz @ 48kHz",
"200Hz @ 48kHz"};
@@ -114,19 +124,33 @@ static const char const *wm8971_ng_type[] = {"Constant PGA Gain",
static const char const *wm8971_mono_mux[] = {"Stereo", "Mono (Left)",
"Mono (Right)", "Digital Mono"};
static const char const *wm8971_dac_phase[] = {"Non Inverted", "Inverted"};
-static const char const *wm8971_lline_mux[] = {"Line", "NC", "NC",
- "PGA", "Differential"};
-static const char const *wm8971_rline_mux[] = {"Line", "Mic", "NC",
- "PGA", "Differential"};
-static const char const *wm8971_lpga_sel[] = {"Line", "NC", "NC",
- "Differential"};
-static const char const *wm8971_rpga_sel[] = {"Line", "Mic", "NC",
- "Differential"};
static const char const *wm8971_adcpol[] = {"Normal", "L Invert",
"R Invert", "L + R Invert"};
static const char const *wm8971_deemp[] = {"None", "32kHz",
"44.1kHz", "48kHz"};
+/* WM8971-only*/
+static const char const *wm8971_lline_mux[] = {"Line 1", "NC", "NC",
+ "PGA", "Differential"};
+static const char const *wm8971_rline_mux[] = {"Line 1", "Mic", "NC",
+ "PGA", "Differential"};
+static const char const *wm8971_lpga_sel[] = {"Line 1", "NC", "NC",
+ "Differential"};
+static const char const *wm8971_rpga_sel[] = {"Line 1", "Mic", "NC",
+ "Differential"};
+
+/* WM8973-only*/
+static const char const *wm8973_line_mux[] = {"Line 1", "Line 2", "Line 3",
+ "PGA", "Differential"};
+static const char const *wm8973_pga_sel[] = {"Line 1", "Line 2", "Line 3",
+ "Differential"};
+static const char const *wm8973_out3[] = {"VREF", "ROUT1 + Vol", "MonoOut",
+ "ROUT1"};
+static const char const *wm8973_diff_sel[] = {"Line 1", "Line 2"};
+static const char const *wm8973_3d_lc[] = { "200Hz", "500Hz" };
+static const char const *wm8973_3d_uc[] = { "2.2kHz", "1.5kHz" };
+static const char const *wm8973_3d_func[] = {"Capture", "Playback"};
+
static int wm8971_set_deemph(struct snd_soc_codec *codec)
{
struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
@@ -185,6 +209,7 @@ static int wm8971_put_deemph(struct snd_kcontrol *kcontrol,
return ret;
}
+/* WM8971 / 3 Controls */
static const SOC_ENUM_SINGLE_DECL(bass_boost, WM8971_BASS, 7, wm8971_bass);
static const SOC_ENUM_SINGLE_DECL(bass_filter, WM8971_BASS,
6, wm8971_bass_filter);
@@ -198,17 +223,39 @@ static const SOC_ENUM_SINGLE_DECL(dac_mono_mix, WM8971_ADCTL1,
4, wm8971_mono_mux);
static const SOC_ENUM_SINGLE_DECL(dac_phase_inv, WM8971_ADCTL1,
1, wm8971_dac_phase);
-static const SOC_ENUM_SINGLE_DECL(left_line, WM8971_LOUTM1,
- 0, wm8971_lline_mux);
-static const SOC_ENUM_SINGLE_DECL(right_line, WM8971_ROUTM1,
- 0, wm8971_rline_mux);
-static const SOC_ENUM_SINGLE_DECL(left_pga, WM8971_LADCIN, 6, wm8971_lpga_sel);
-static const SOC_ENUM_SINGLE_DECL(right_pga, WM8971_RADCIN,
- 6, wm8971_rpga_sel);
static const SOC_ENUM_SINGLE_DECL(capture_polarity, WM8971_ADCDAC,
5, wm8971_adcpol);
static const SOC_ENUM_SINGLE_DECL(monomux, WM8971_ADCIN, 6, wm8971_mono_mux);
+/* WM8971-only */
+static const SOC_ENUM_SINGLE_DECL(wm8971_left_line, WM8971_LOUTM1,
+ 0, wm8971_lline_mux);
+static const SOC_ENUM_SINGLE_DECL(wm8971_right_line, WM8971_ROUTM1,
+ 0, wm8971_rline_mux);
+static const SOC_ENUM_SINGLE_DECL(wm8971_left_pga, WM8971_LADCIN,
+ 6, wm8971_lpga_sel);
+static const SOC_ENUM_SINGLE_DECL(wm8971_right_pga, WM8971_RADCIN,
+ 6, wm8971_rpga_sel);
+
+/* WM8973-only */
+static const SOC_ENUM_SINGLE_DECL(wm8973_left_line, WM8971_LOUTM1,
+ 0, wm8973_line_mux);
+static const SOC_ENUM_SINGLE_DECL(wm8973_right_line, WM8971_ROUTM1,
+ 0, wm8973_line_mux);
+static const SOC_ENUM_SINGLE_DECL(wm8973_left_pga, WM8971_LADCIN,
+ 6, wm8973_pga_sel);
+static const SOC_ENUM_SINGLE_DECL(wm8973_right_pga, WM8971_RADCIN,
+ 6, wm8973_pga_sel);
+static const SOC_ENUM_SINGLE_DECL(wm8973_out3_control, WM8971_ADCTL2,
+ 7, wm8973_out3);
+static const SOC_ENUM_SINGLE_DECL(wm8973_diffmux, WM8971_ADCIN,
+ 8, wm8973_diff_sel);
+static const SOC_ENUM_SINGLE_DECL(wm8973_lower_cutoff, WM8973_3D,
+ 5, wm8973_3d_lc);
+static const SOC_ENUM_SINGLE_DECL(wm8973_upper_cutoff, WM8973_3D,
+ 6, wm8973_3d_uc);
+static const SOC_ENUM_SINGLE_DECL(wm8973_mode, WM8973_3D, 7, wm8973_3d_func);
+
static const DECLARE_TLV_DB_SCALE(in_vol, -1725, 75, 0);
static const DECLARE_TLV_DB_SCALE(out_vol, -6700, 91, 0);
static const DECLARE_TLV_DB_SCALE(attenuate_6db, -600, 600, 0);
@@ -287,6 +334,17 @@ static const struct snd_kcontrol_new wm8971_snd_controls[] = {
SOC_DOUBLE_R_TLV("ADC Volume", WM8971_LADC, WM8971_RADC,
0, 255, 0, adc_vol),
+ SOC_SINGLE("Right Speaker Playback Invert Switch", WM8971_ADCTL2,
+ 4, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8973_snd_controls[] = {
+ /* 3D Control */
+ SOC_SINGLE("3D Switch", WM8973_3D, 0, 1, 0),
+ SOC_SINGLE("3D Volume", WM8973_3D, 1, 15, 0),
+ SOC_ENUM("3D Lower Cut-off", wm8973_lower_cutoff),
+ SOC_ENUM("3D Upper Cut-off", wm8973_upper_cutoff),
+ SOC_ENUM("3D Mode", wm8973_mode),
};
/*
@@ -319,25 +377,41 @@ SOC_DAPM_SINGLE("Right Bypass Switch", WM8971_MOUTM2, 7, 1, 0),
/* Left Line Mux */
static const struct snd_kcontrol_new wm8971_left_line_controls =
-SOC_DAPM_ENUM("Route", left_line);
+SOC_DAPM_ENUM("Route", wm8971_left_line);
+static const struct snd_kcontrol_new wm8973_left_line_controls =
+SOC_DAPM_ENUM("Route", wm8973_left_line);
/* Right Line Mux */
static const struct snd_kcontrol_new wm8971_right_line_controls =
-SOC_DAPM_ENUM("Route", right_line);
+SOC_DAPM_ENUM("Route", wm8971_right_line);
+static const struct snd_kcontrol_new wm8973_right_line_controls =
+SOC_DAPM_ENUM("Route", wm8973_right_line);
/* Left PGA Mux */
static const struct snd_kcontrol_new wm8971_left_pga_controls =
-SOC_DAPM_ENUM("Route", left_pga);
+SOC_DAPM_ENUM("Route", wm8971_left_pga);
+static const struct snd_kcontrol_new wm8973_left_pga_controls =
+SOC_DAPM_ENUM("Route", wm8973_left_pga);
/* Right PGA Mux */
static const struct snd_kcontrol_new wm8971_right_pga_controls =
-SOC_DAPM_ENUM("Route", right_pga);
+SOC_DAPM_ENUM("Route", wm8971_right_pga);
+static const struct snd_kcontrol_new wm8973_right_pga_controls =
+SOC_DAPM_ENUM("Route", wm8973_right_pga);
+
+/* Out 3 Mux */
+static const struct snd_kcontrol_new wm8973_out3_controls =
+SOC_DAPM_ENUM("Route", wm8973_out3_control);
+
+/* Differential Mux */
+static const struct snd_kcontrol_new wm8973_diffmux_controls =
+SOC_DAPM_ENUM("Route", wm8973_diffmux);
/* Mono ADC Mux */
static const struct snd_kcontrol_new wm8971_monomux_controls =
SOC_DAPM_ENUM("Route", monomux);
-static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
+static const struct snd_soc_dapm_widget wm897x_dapm_widgets[] = {
SND_SOC_DAPM_MIXER("Left Mixer", SND_SOC_NOPM, 0, 0,
&wm8971_left_mixer_controls[0],
ARRAY_SIZE(wm8971_left_mixer_controls)),
@@ -360,15 +434,6 @@ static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8971_PWR1, 2, 0),
SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8971_PWR1, 3, 0),
- SND_SOC_DAPM_MUX("Left PGA Mux", WM8971_PWR1, 5, 0,
- &wm8971_left_pga_controls),
- SND_SOC_DAPM_MUX("Right PGA Mux", WM8971_PWR1, 4, 0,
- &wm8971_right_pga_controls),
- SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
- &wm8971_left_line_controls),
- SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
- &wm8971_right_line_controls),
-
SND_SOC_DAPM_MUX("Left ADC Mux", SND_SOC_NOPM, 0, 0,
&wm8971_monomux_controls),
SND_SOC_DAPM_MUX("Right ADC Mux", SND_SOC_NOPM, 0, 0,
@@ -385,6 +450,41 @@ static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("MIC"),
};
+static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
+ SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
+ &wm8971_left_line_controls),
+ SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
+ &wm8971_right_line_controls),
+ SND_SOC_DAPM_MUX("Left PGA Mux", WM8971_PWR1, 5, 0,
+ &wm8971_left_pga_controls),
+ SND_SOC_DAPM_MUX("Right PGA Mux", WM8971_PWR1, 4, 0,
+ &wm8971_right_pga_controls),
+};
+
+static const struct snd_soc_dapm_widget wm8973_dapm_widgets[] = {
+ SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
+ &wm8973_left_line_controls),
+ SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
+ &wm8973_right_line_controls),
+ SND_SOC_DAPM_MUX("Right PGA Mux", WM8971_PWR1, 4, 0,
+ &wm8973_right_pga_controls),
+ SND_SOC_DAPM_MUX("Left PGA Mux", WM8971_PWR1, 5, 0,
+ &wm8973_left_pga_controls),
+ SND_SOC_DAPM_MUX("Out3 Mux", SND_SOC_NOPM, 0, 0,
+ &wm8973_out3_controls),
+ SND_SOC_DAPM_PGA("Out 3", WM8971_PWR2, 1, 0, NULL, 0),
+ SND_SOC_DAPM_MUX("Differential Mux", SND_SOC_NOPM, 0, 0,
+ &wm8973_diffmux_controls),
+
+ SND_SOC_DAPM_OUTPUT("OUT3"),
+ SND_SOC_DAPM_OUTPUT("VREF"),
+
+ SND_SOC_DAPM_INPUT("LINPUT2"),
+ SND_SOC_DAPM_INPUT("LINPUT3"),
+ SND_SOC_DAPM_INPUT("RINPUT2"),
+ SND_SOC_DAPM_INPUT("RINPUT3"),
+};
+
static const struct snd_soc_dapm_route wm8971_dapm_routes[] = {
/* left mixer */
{"Left Mixer", "Playback Switch", "Left DAC"},
@@ -425,27 +525,27 @@ static const struct snd_soc_dapm_route wm8971_dapm_routes[] = {
{"MONO1", NULL, "Mono Out"},
/* Left Line Mux */
- {"Left Line Mux", "Line", "LINPUT1"},
+ {"Left Line Mux", "Line 1", "LINPUT1"},
{"Left Line Mux", "PGA", "Left PGA Mux"},
{"Left Line Mux", "Differential", "Differential Mux"},
/* Right Line Mux */
- {"Right Line Mux", "Line", "RINPUT1"},
+ {"Right Line Mux", "Line 1", "RINPUT1"},
{"Right Line Mux", "Mic", "MIC"},
{"Right Line Mux", "PGA", "Right PGA Mux"},
{"Right Line Mux", "Differential", "Differential Mux"},
/* Left PGA Mux */
- {"Left PGA Mux", "Line", "LINPUT1"},
+ {"Left PGA Mux", "Line 1", "LINPUT1"},
{"Left PGA Mux", "Differential", "Differential Mux"},
/* Right PGA Mux */
- {"Right PGA Mux", "Line", "RINPUT1"},
+ {"Right PGA Mux", "Line 1", "RINPUT1"},
{"Right PGA Mux", "Differential", "Differential Mux"},
/* Differential Mux */
- {"Differential Mux", "Line", "LINPUT1"},
- {"Differential Mux", "Line", "RINPUT1"},
+ {"Differential Mux", "Line 1", "LINPUT1"},
+ {"Differential Mux", "Line 1", "RINPUT1"},
/* Left ADC Mux */
{"Left ADC Mux", "Stereo", "Left PGA Mux"},
@@ -462,6 +562,53 @@ static const struct snd_soc_dapm_route wm8971_dapm_routes[] = {
{"Right ADC", NULL, "Right ADC Mux"},
};
+static const struct snd_soc_dapm_route wm8973_dapm_routes[] = {
+ {"Out3 Mux", "VREF", "VREF"},
+ {"Out3 Mux", "ROUT1 + Vol", "ROUT1"},
+ {"Out3 Mux", "ROUT1", "Right Mixer"},
+ {"Out3 Mux", "MonoOut", "MONO1"},
+ {"Out 3", NULL, "Out3 Mux"},
+ {"OUT3", NULL, "Out 3"},
+
+ {"Left Line Mux", "Line 2", "LINPUT2"},
+ {"Left Line Mux", "Line 3", "LINPUT3"},
+
+ {"Right Line Mux", "Line 2", "RINPUT2"},
+ {"Right Line Mux", "Line 3", "RINPUT3"},
+
+ {"Left PGA Mux", "Line 2", "LINPUT2"},
+ {"Left PGA Mux", "Line 3", "LINPUT3"},
+
+ {"Right PGA Mux", "Line 2", "RINPUT2"},
+ {"Right PGA Mux", "Line 3", "RINPUT3"},
+
+ {"Differential Mux", "Line 2", "LINPUT2"},
+ {"Differential Mux", "Line 2", "RINPUT2"},
+};
+
+static int wm897x_add_controls(struct snd_soc_codec *codec)
+{
+ struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_dapm_context *dapm = &codec->dapm;
+
+ if (wm8971->variant)
+ snd_soc_add_codec_controls(codec, wm8973_snd_controls,
+ ARRAY_SIZE(wm8973_snd_controls));
+
+ if (wm8971->variant)
+ snd_soc_dapm_new_controls(dapm, wm8973_dapm_widgets,
+ ARRAY_SIZE(wm8973_dapm_widgets));
+ else
+ snd_soc_dapm_new_controls(dapm, wm8971_dapm_widgets,
+ ARRAY_SIZE(wm8971_dapm_widgets));
+
+ if (wm8971->variant)
+ snd_soc_dapm_add_routes(dapm, wm8973_dapm_routes,
+ ARRAY_SIZE(wm8973_dapm_routes));
+
+ return 0;
+}
+
struct _coeff_div {
u32 mclk;
u32 rate;
@@ -722,12 +869,15 @@ static int wm8971_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
+ static const u16 micbias[] = {0x00c1, 0x00c2};
+
u16 pwr_reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
switch (level) {
case SND_SOC_BIAS_ON:
/* set vmid to 50k and unmute dac */
- snd_soc_write(codec, WM8971_PWR1, pwr_reg | 0x00c1);
+ snd_soc_write(codec, WM8971_PWR1,
+ pwr_reg | micbias[wm8971->variant]);
break;
case SND_SOC_BIAS_PREPARE:
break;
@@ -762,21 +912,28 @@ static const struct snd_soc_dai_ops wm8971_dai_ops = {
.set_sysclk = wm8971_set_dai_sysclk,
};
-static struct snd_soc_dai_driver wm8971_dai = {
- .name = "wm8971-hifi",
- .playback = {
- .stream_name = "Playback",
- .channels_min = 1,
- .channels_max = 2,
- .rates = WM8971_RATES,
- .formats = WM8971_FORMATS,},
- .capture = {
- .stream_name = "Capture",
- .channels_min = 1,
- .channels_max = 2,
- .rates = WM8971_RATES,
- .formats = WM8971_FORMATS,},
- .ops = &wm8971_dai_ops,
+static struct snd_soc_dai_driver wm8971_dai[] = {
+ {
+ .name = "wm8971-hifi-playback",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8971_RATES,
+ .formats = WM8971_FORMATS,
+ },
+ .ops = &wm8971_dai_ops,
+ }, {
+ .name = "wm8971-hifi-capture",
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8971_RATES,
+ .formats = WM8971_FORMATS,
+ },
+ .ops = &wm8971_dai_ops,
+ },
};
static int wm8971_suspend(struct snd_soc_codec *codec)
@@ -805,10 +962,59 @@ static int wm8971_resume(struct snd_soc_codec *codec)
static int wm8971_probe(struct snd_soc_codec *codec)
{
+ struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
+ const u32 *p;
int ret = 0;
u16 reg;
wm8971_reset(codec);
+ if (codec->dev->of_node) {
+ p = of_get_property(codec->dev->of_node, "mclk-div", NULL);
+ if (p)
+ wm8971->mclk_div = be32_to_cpu(*p);
+ }
+ /* Master Clock Divide by 2 (0 = not div, 1 = div by 2) */
+ if (wm8971->mclk_div)
+ snd_soc_update_bits(codec, WM8971_SRATE, 0x0040, 0x0040);
+
+ /* Analouge Bias (0 = 1.8V, 1 = 2.5V, 2 = 3.3V) */
+ if (codec->dev->of_node) {
+ p = of_get_property(codec->dev->of_node, "anglouge-bias", NULL);
+ if (p)
+ wm8971->anglouge_bias = be32_to_cpu(*p);
+ }
+ switch (wm8971->anglouge_bias) {
+ case 0:
+ reg = snd_soc_read(codec, WM8971_ADCTL1) & 0xff3f;
+ snd_soc_write(codec, WM8971_ADCTL1, reg);
+ break;
+ case 1:
+ reg = snd_soc_read(codec, WM8971_ADCTL1) & 0xff7f;
+ snd_soc_write(codec, WM8971_ADCTL1, reg);
+ case 2:
+ /* Default */
+ break;
+ }
+
+ /* Headphone Switch (0 = disabled, 1 = enabled) */
+ if (codec->dev->of_node) {
+ p = of_get_property(codec->dev->of_node, "headphone-en", NULL);
+ if (p)
+ wm8971->headphone_en = be32_to_cpu(*p);
+ }
+ if (wm8971->headphone_en)
+ snd_soc_update_bits(codec, WM8971_ADCTL2, 0x0040, 0x0040);
+
+ /* Headphone Polarity (0 = HPDETECT high represent headphone,
+ * 1 = HPDETECT high represent speaker)
+ */
+ if (codec->dev->of_node) {
+ p = of_get_property(codec->dev->of_node, "headphone-pol", NULL);
+ if (p)
+ wm8971->headphone_pol = be32_to_cpu(*p);
+ }
+ if (wm8971->headphone_pol)
+ snd_soc_update_bits(codec, WM8971_ADCTL2, 0x0020, 0x0020);
/* charge output caps - set vmid to 5k for quick power up */
reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
@@ -827,6 +1033,8 @@ static int wm8971_probe(struct snd_soc_codec *codec)
snd_soc_update_bits(codec, WM8971_LINVOL, 0x0100, 0x0100);
snd_soc_update_bits(codec, WM8971_RINVOL, 0x0100, 0x0100);
+ wm897x_add_controls(codec);
+
return ret;
}
@@ -847,8 +1055,8 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8971 = {
.controls = wm8971_snd_controls,
.num_controls = ARRAY_SIZE(wm8971_snd_controls),
- .dapm_widgets = wm8971_dapm_widgets,
- .num_dapm_widgets = ARRAY_SIZE(wm8971_dapm_widgets),
+ .dapm_widgets = wm897x_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(wm897x_dapm_widgets),
.dapm_routes = wm8971_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(wm8971_dapm_routes),
};
@@ -875,6 +1083,7 @@ static int wm8971_i2c_probe(struct i2c_client *i2c,
return -ENOMEM;
mutex_init(&wm8971->deemph_mutex);
+ wm8971->variant = (int)id->driver_data;
wm8971->regmap = devm_regmap_init_i2c(i2c, &wm8971_regmap);
if (IS_ERR(wm8971->regmap))
@@ -883,7 +1092,7 @@ static int wm8971_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, wm8971);
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm8971,
- &wm8971_dai, 1);
+ wm8971_dai, ARRAY_SIZE(wm8971_dai));
return ret;
}
@@ -895,15 +1104,23 @@ static int wm8971_i2c_remove(struct i2c_client *client)
}
static const struct i2c_device_id wm8971_i2c_id[] = {
- { "wm8971", 0 },
+ { "wm8971", VARIANT_WM8971 },
+ { "wm8973", VARIANT_WM8973 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8971_i2c_id);
+static const struct of_device_id wm897x_dt_ids[] = {
+ { .compatible = "wlf,wm8971" },
+ { .compatible = "wlf,wm8973" },
+ { /* sentinel */ }
+};
+
static struct i2c_driver wm8971_i2c_driver = {
.driver = {
.name = "wm8971",
.owner = THIS_MODULE,
+ .of_match_table = wm897x_dt_ids,
},
.probe = wm8971_i2c_probe,
.remove = wm8971_i2c_remove,
@@ -915,3 +1132,5 @@ module_i2c_driver(wm8971_i2c_driver);
MODULE_DESCRIPTION("ASoC WM8971 driver");
MODULE_AUTHOR("Lab126");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("*wm8971*");
+MODULE_ALIAS("*wm8973*");
diff --git a/sound/soc/codecs/wm8971.h b/sound/soc/codecs/wm8971.h
old mode 100644
new mode 100755
index f31c38f..aeab04a
--- a/sound/soc/codecs/wm8971.h
+++ b/sound/soc/codecs/wm8971.h
@@ -22,21 +22,22 @@
#define WM8971_ADCDAC 0x05
#define WM8971_IFACE 0x07
#define WM8971_SRATE 0x08
-#define WM8971_LDAC 0x0a
-#define WM8971_RDAC 0x0b
-#define WM8971_BASS 0x0c
+#define WM8971_LDAC 0x0a
+#define WM8971_RDAC 0x0b
+#define WM8971_BASS 0x0c
#define WM8971_TREBLE 0x0d
#define WM8971_RESET 0x0f
-#define WM8971_ALC1 0x11
-#define WM8971_ALC2 0x12
-#define WM8971_ALC3 0x13
+#define WM8973_3D 0x10
+#define WM8971_ALC1 0x11
+#define WM8971_ALC2 0x12
+#define WM8971_ALC3 0x13
#define WM8971_NGATE 0x14
-#define WM8971_LADC 0x15
-#define WM8971_RADC 0x16
+#define WM8971_LADC 0x15
+#define WM8971_RADC 0x16
#define WM8971_ADCTL1 0x17
#define WM8971_ADCTL2 0x18
-#define WM8971_PWR1 0x19
-#define WM8971_PWR2 0x1a
+#define WM8971_PWR1 0x19
+#define WM8971_PWR2 0x1a
#define WM8971_ADCTL3 0x1b
#define WM8971_ADCIN 0x1f
#define WM8971_LADCIN 0x20
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCHv4 7/9] WM8971 uses msleep to replace work queue
2014-09-17 8:41 ` [PATCHv4 7/9] WM8971 uses msleep to replace work queue Xavier Hsu
@ 2014-09-22 12:16 ` Charles Keepax
2014-09-24 7:37 ` Xavier Hsu
0 siblings, 1 reply; 14+ messages in thread
From: Charles Keepax @ 2014-09-22 12:16 UTC (permalink / raw)
To: Xavier Hsu; +Cc: Andy Green, alsa-devel, patches, lars, patches
On Wed, Sep 17, 2014 at 04:41:13PM +0800, Xavier Hsu wrote:
> This patch improves WM8971.
> We use msleep to replace work queue.
> "As suggested by Mark Brown"
>
> Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
> Signed-off-by: Andy Green <andy.green@linaro.org>
> ---
> Any comments about improving the patch are welcome.
> Thanks.
>
> sound/soc/codecs/wm8971.c | 27 ++++-----------------------
> 1 file changed, 4 insertions(+), 23 deletions(-)
>
> diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
> index 5b38c7a..d081cae 100755
> --- a/sound/soc/codecs/wm8971.c
> +++ b/sound/soc/codecs/wm8971.c
> @@ -36,8 +36,6 @@
>
> #define WM8971_REG_COUNT 43
>
> -static struct workqueue_struct *wm8971_workq;
> -
> /* codec private data */
> struct wm8971_priv {
> /* MCLK */
> @@ -779,16 +777,6 @@ static struct snd_soc_dai_driver wm8971_dai = {
> .ops = &wm8971_dai_ops,
> };
>
> -static void wm8971_work(struct work_struct *work)
> -{
> - struct snd_soc_dapm_context *dapm =
> - container_of(work, struct snd_soc_dapm_context,
> - delayed_work.work);
> - struct snd_soc_codec *codec = dapm->codec;
> -
> - wm8971_set_bias_level(codec, codec->dapm.bias_level);
> -}
> -
> static int wm8971_suspend(struct snd_soc_codec *codec)
> {
> wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
> @@ -806,8 +794,8 @@ static int wm8971_resume(struct snd_soc_codec *codec)
> reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
> snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
> codec->dapm.bias_level = SND_SOC_BIAS_ON;
> - queue_delayed_work(wm8971_workq, &codec->dapm.delayed_work,
> - msecs_to_jiffies(1000));
> + wm8971_set_bias_level(codec, codec->dapm.bias_level);
> + msleep(1000);
> }
>
> return 0;
> @@ -818,19 +806,14 @@ static int wm8971_probe(struct snd_soc_codec *codec)
> int ret = 0;
> u16 reg;
>
> - INIT_DELAYED_WORK(&codec->dapm.delayed_work, wm8971_work);
> - wm8971_workq = create_workqueue("wm8971");
> - if (wm8971_workq == NULL)
> - return -ENOMEM;
> -
> wm8971_reset(codec);
>
> /* charge output caps - set vmid to 5k for quick power up */
> reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
> snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
> codec->dapm.bias_level = SND_SOC_BIAS_STANDBY;
> - queue_delayed_work(wm8971_workq, &codec->dapm.delayed_work,
> - msecs_to_jiffies(1000));
> + wm8971_set_bias_level(codec, codec->dapm.bias_level);
> + msleep(1000);
Before this patch the bias_level change is after the delay, after
this patch the change is before the delay? That doesn't seem
right?
>
> /* set the update bits */
> snd_soc_update_bits(codec, WM8971_LDAC, 0x0100, 0x0100);
> @@ -850,8 +833,6 @@ static int wm8971_remove(struct snd_soc_codec *codec)
> {
> wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
>
> - if (wm8971_workq)
> - destroy_workqueue(wm8971_workq);
> return 0;
> }
>
> --
> 1.7.9.5
>
Thanks,
Charles
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHv4 9/9] ASOC add WM8973 support to WM8971
2014-09-17 8:41 ` [PATCHv4 9/9] ASOC add WM8973 support to WM8971 Xavier Hsu
@ 2014-09-22 12:34 ` Charles Keepax
0 siblings, 0 replies; 14+ messages in thread
From: Charles Keepax @ 2014-09-22 12:34 UTC (permalink / raw)
To: Xavier Hsu; +Cc: Andy Green, alsa-devel, patches, lars, patches
On Wed, Sep 17, 2014 at 04:41:15PM +0800, Xavier Hsu wrote:
> This patch adds support for the wm8973 codec.
>
> Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
> Signed-off-by: Andy Green <andy.green@linaro.org>
> ---
> Any comments about improving the patch are welcome.
> Thanks.
>
> Documentation/devicetree/bindings/sound/wm8971.txt | 42 +++
> sound/soc/codecs/wm8971.c | 337 ++++++++++++++++----
> sound/soc/codecs/wm8971.h | 21 +-
> 3 files changed, 331 insertions(+), 69 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/sound/wm8971.txt
> mode change 100644 => 100755 sound/soc/codecs/wm8971.h
>
> diff --git a/Documentation/devicetree/bindings/sound/wm8971.txt b/Documentation/devicetree/bindings/sound/wm8971.txt
> new file mode 100644
> index 0000000..d8023d7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/wm8971.txt
> @@ -0,0 +1,42 @@
> +WM8971 and WM8973 audio CODEC
> +
> +These devices support both I2C and SPI (configured with pin strapping
> +on the board).
> +
> +Required properties:
> +
> + - compatible : "wlf,wm8971".
> + "wlf,wm8973".
> +
> + - reg : the I2C address of the device for I2C, the chip select
> + number for SPI.
> +
> +Optional properties:
> +
> + - mclk-div : Setting the CLKDIV2 bit for dividing MCLK.
> + mclk-div = <0> (Not divide & Default).
> + mclk-div = <1> (Divide by 2).
> +
> + - anglouge-bias : Analogue Bias optimization
Typo here ^^^ analogue
> + anglouge-bias = <0> (AVDD 1.8V)
> + anglouge-bias = <1> (AVDD 2.5V)
> + anglouge-bias = <2> (AVDD 3.3V & Default)
> +
> + - headphone-en : Headphone Switch
> + headphone-en = <0> (Headphone switch disabled & Default)
> + headphone-en = <1> (Headphone switch enabled)
This can probably just be a boolean property, ie. either exist or
not.
> +
> + - headphone-pol : Headphone Switch Polarity
> + headphone-pol = <0> (HPDETECT high = headphone & Default)
> + headphone-pol = <1> (HPDETECT high = speaker)
> +
> +Example:
> +
> +codec: wm8973@1a {
> + compatible = "wlf,wm8973";
> + reg = <0x1a>;
> + mclk-div = <1>;
> + anglouge-bias = <0>;
> + headphone-en = <1>;
> + headphone-pol = <1>;
> +};
> diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
> index 6fecf2d..e9c7ba6 100755
> --- a/sound/soc/codecs/wm8971.c
> +++ b/sound/soc/codecs/wm8971.c
> @@ -7,7 +7,7 @@
> *
> * Based on wm8753.c by Liam Girdwood
> *
> - * WM8971 Improve Copyright (C) 2014 Linaro, Ltd
> + * WM8971 Improve & Wm8973 Support Copyright (C) 2014 Linaro, Ltd
> * Author: Xavier Hsu <xavier.hsu@linaro.org>
> * Andy Green <andy.green@linaro.org>
> *
> @@ -34,19 +34,29 @@
>
> #include "wm8971.h"
>
> -#define WM8971_REG_COUNT 43
> +enum variant {
> + VARIANT_WM8971,
> + VARIANT_WM8973
> +};
> +
> +#define WM8971_REG_COUNT 43
No need to tabbing on this, if you want to do this merge it into
the coding standards fixup patch.
>
> /* codec private data */
> struct wm8971_priv {
> struct regmap *regmap;
> + enum variant variant;
> /* MCLK */
> unsigned int sysclk;
> struct snd_pcm_hw_constraint_list *sysclk_constraints;
> -
> /* De-emphasis */
> struct mutex deemph_mutex;
> int playback_fs;
> bool deemph;
> + /* From DT */
> + int mclk_div;
> + int anglouge_bias;
> + int headphone_en;
> + int headphone_pol;
> };
>
> /*
> @@ -102,7 +112,7 @@ static const struct reg_default wm8971_reg_defaults[] = {
>
> #define wm8971_reset(c) snd_soc_write(c, WM8971_RESET, 0)
>
> -/* WM8971 Controls */
> +/* WM8971 / 3 Controls */
> static const char const *wm8971_bass[] = {"Linear Control", "Adaptive Boost"};
> static const char const *wm8971_bass_filter[] = {"130Hz @ 48kHz",
> "200Hz @ 48kHz"};
> @@ -114,19 +124,33 @@ static const char const *wm8971_ng_type[] = {"Constant PGA Gain",
> static const char const *wm8971_mono_mux[] = {"Stereo", "Mono (Left)",
> "Mono (Right)", "Digital Mono"};
> static const char const *wm8971_dac_phase[] = {"Non Inverted", "Inverted"};
> -static const char const *wm8971_lline_mux[] = {"Line", "NC", "NC",
> - "PGA", "Differential"};
> -static const char const *wm8971_rline_mux[] = {"Line", "Mic", "NC",
> - "PGA", "Differential"};
> -static const char const *wm8971_lpga_sel[] = {"Line", "NC", "NC",
> - "Differential"};
> -static const char const *wm8971_rpga_sel[] = {"Line", "Mic", "NC",
> - "Differential"};
> static const char const *wm8971_adcpol[] = {"Normal", "L Invert",
> "R Invert", "L + R Invert"};
> static const char const *wm8971_deemp[] = {"None", "32kHz",
> "44.1kHz", "48kHz"};
>
> +/* WM8971-only*/
> +static const char const *wm8971_lline_mux[] = {"Line 1", "NC", "NC",
> + "PGA", "Differential"};
> +static const char const *wm8971_rline_mux[] = {"Line 1", "Mic", "NC",
> + "PGA", "Differential"};
> +static const char const *wm8971_lpga_sel[] = {"Line 1", "NC", "NC",
> + "Differential"};
> +static const char const *wm8971_rpga_sel[] = {"Line 1", "Mic", "NC",
> + "Differential"};
> +
> +/* WM8973-only*/
> +static const char const *wm8973_line_mux[] = {"Line 1", "Line 2", "Line 3",
> + "PGA", "Differential"};
> +static const char const *wm8973_pga_sel[] = {"Line 1", "Line 2", "Line 3",
> + "Differential"};
> +static const char const *wm8973_out3[] = {"VREF", "ROUT1 + Vol", "MonoOut",
> + "ROUT1"};
> +static const char const *wm8973_diff_sel[] = {"Line 1", "Line 2"};
> +static const char const *wm8973_3d_lc[] = { "200Hz", "500Hz" };
> +static const char const *wm8973_3d_uc[] = { "2.2kHz", "1.5kHz" };
> +static const char const *wm8973_3d_func[] = {"Capture", "Playback"};
> +
> static int wm8971_set_deemph(struct snd_soc_codec *codec)
> {
> struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
> @@ -185,6 +209,7 @@ static int wm8971_put_deemph(struct snd_kcontrol *kcontrol,
> return ret;
> }
>
> +/* WM8971 / 3 Controls */
> static const SOC_ENUM_SINGLE_DECL(bass_boost, WM8971_BASS, 7, wm8971_bass);
> static const SOC_ENUM_SINGLE_DECL(bass_filter, WM8971_BASS,
> 6, wm8971_bass_filter);
> @@ -198,17 +223,39 @@ static const SOC_ENUM_SINGLE_DECL(dac_mono_mix, WM8971_ADCTL1,
> 4, wm8971_mono_mux);
> static const SOC_ENUM_SINGLE_DECL(dac_phase_inv, WM8971_ADCTL1,
> 1, wm8971_dac_phase);
> -static const SOC_ENUM_SINGLE_DECL(left_line, WM8971_LOUTM1,
> - 0, wm8971_lline_mux);
> -static const SOC_ENUM_SINGLE_DECL(right_line, WM8971_ROUTM1,
> - 0, wm8971_rline_mux);
> -static const SOC_ENUM_SINGLE_DECL(left_pga, WM8971_LADCIN, 6, wm8971_lpga_sel);
> -static const SOC_ENUM_SINGLE_DECL(right_pga, WM8971_RADCIN,
> - 6, wm8971_rpga_sel);
> static const SOC_ENUM_SINGLE_DECL(capture_polarity, WM8971_ADCDAC,
> 5, wm8971_adcpol);
> static const SOC_ENUM_SINGLE_DECL(monomux, WM8971_ADCIN, 6, wm8971_mono_mux);
>
> +/* WM8971-only */
> +static const SOC_ENUM_SINGLE_DECL(wm8971_left_line, WM8971_LOUTM1,
> + 0, wm8971_lline_mux);
> +static const SOC_ENUM_SINGLE_DECL(wm8971_right_line, WM8971_ROUTM1,
> + 0, wm8971_rline_mux);
> +static const SOC_ENUM_SINGLE_DECL(wm8971_left_pga, WM8971_LADCIN,
> + 6, wm8971_lpga_sel);
> +static const SOC_ENUM_SINGLE_DECL(wm8971_right_pga, WM8971_RADCIN,
> + 6, wm8971_rpga_sel);
> +
> +/* WM8973-only */
> +static const SOC_ENUM_SINGLE_DECL(wm8973_left_line, WM8971_LOUTM1,
> + 0, wm8973_line_mux);
> +static const SOC_ENUM_SINGLE_DECL(wm8973_right_line, WM8971_ROUTM1,
> + 0, wm8973_line_mux);
> +static const SOC_ENUM_SINGLE_DECL(wm8973_left_pga, WM8971_LADCIN,
> + 6, wm8973_pga_sel);
> +static const SOC_ENUM_SINGLE_DECL(wm8973_right_pga, WM8971_RADCIN,
> + 6, wm8973_pga_sel);
> +static const SOC_ENUM_SINGLE_DECL(wm8973_out3_control, WM8971_ADCTL2,
> + 7, wm8973_out3);
> +static const SOC_ENUM_SINGLE_DECL(wm8973_diffmux, WM8971_ADCIN,
> + 8, wm8973_diff_sel);
> +static const SOC_ENUM_SINGLE_DECL(wm8973_lower_cutoff, WM8973_3D,
> + 5, wm8973_3d_lc);
> +static const SOC_ENUM_SINGLE_DECL(wm8973_upper_cutoff, WM8973_3D,
> + 6, wm8973_3d_uc);
> +static const SOC_ENUM_SINGLE_DECL(wm8973_mode, WM8973_3D, 7, wm8973_3d_func);
> +
> static const DECLARE_TLV_DB_SCALE(in_vol, -1725, 75, 0);
> static const DECLARE_TLV_DB_SCALE(out_vol, -6700, 91, 0);
> static const DECLARE_TLV_DB_SCALE(attenuate_6db, -600, 600, 0);
> @@ -287,6 +334,17 @@ static const struct snd_kcontrol_new wm8971_snd_controls[] = {
>
> SOC_DOUBLE_R_TLV("ADC Volume", WM8971_LADC, WM8971_RADC,
> 0, 255, 0, adc_vol),
> + SOC_SINGLE("Right Speaker Playback Invert Switch", WM8971_ADCTL2,
> + 4, 1, 0),
> +};
> +
> +static const struct snd_kcontrol_new wm8973_snd_controls[] = {
> + /* 3D Control */
> + SOC_SINGLE("3D Switch", WM8973_3D, 0, 1, 0),
> + SOC_SINGLE("3D Volume", WM8973_3D, 1, 15, 0),
> + SOC_ENUM("3D Lower Cut-off", wm8973_lower_cutoff),
> + SOC_ENUM("3D Upper Cut-off", wm8973_upper_cutoff),
> + SOC_ENUM("3D Mode", wm8973_mode),
> };
>
> /*
> @@ -319,25 +377,41 @@ SOC_DAPM_SINGLE("Right Bypass Switch", WM8971_MOUTM2, 7, 1, 0),
>
> /* Left Line Mux */
> static const struct snd_kcontrol_new wm8971_left_line_controls =
> -SOC_DAPM_ENUM("Route", left_line);
> +SOC_DAPM_ENUM("Route", wm8971_left_line);
> +static const struct snd_kcontrol_new wm8973_left_line_controls =
> +SOC_DAPM_ENUM("Route", wm8973_left_line);
>
> /* Right Line Mux */
> static const struct snd_kcontrol_new wm8971_right_line_controls =
> -SOC_DAPM_ENUM("Route", right_line);
> +SOC_DAPM_ENUM("Route", wm8971_right_line);
> +static const struct snd_kcontrol_new wm8973_right_line_controls =
> +SOC_DAPM_ENUM("Route", wm8973_right_line);
>
> /* Left PGA Mux */
> static const struct snd_kcontrol_new wm8971_left_pga_controls =
> -SOC_DAPM_ENUM("Route", left_pga);
> +SOC_DAPM_ENUM("Route", wm8971_left_pga);
> +static const struct snd_kcontrol_new wm8973_left_pga_controls =
> +SOC_DAPM_ENUM("Route", wm8973_left_pga);
>
> /* Right PGA Mux */
> static const struct snd_kcontrol_new wm8971_right_pga_controls =
> -SOC_DAPM_ENUM("Route", right_pga);
> +SOC_DAPM_ENUM("Route", wm8971_right_pga);
> +static const struct snd_kcontrol_new wm8973_right_pga_controls =
> +SOC_DAPM_ENUM("Route", wm8973_right_pga);
> +
> +/* Out 3 Mux */
> +static const struct snd_kcontrol_new wm8973_out3_controls =
> +SOC_DAPM_ENUM("Route", wm8973_out3_control);
> +
> +/* Differential Mux */
> +static const struct snd_kcontrol_new wm8973_diffmux_controls =
> +SOC_DAPM_ENUM("Route", wm8973_diffmux);
>
> /* Mono ADC Mux */
> static const struct snd_kcontrol_new wm8971_monomux_controls =
> SOC_DAPM_ENUM("Route", monomux);
>
> -static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
> +static const struct snd_soc_dapm_widget wm897x_dapm_widgets[] = {
> SND_SOC_DAPM_MIXER("Left Mixer", SND_SOC_NOPM, 0, 0,
> &wm8971_left_mixer_controls[0],
> ARRAY_SIZE(wm8971_left_mixer_controls)),
> @@ -360,15 +434,6 @@ static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
> SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8971_PWR1, 2, 0),
> SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8971_PWR1, 3, 0),
>
> - SND_SOC_DAPM_MUX("Left PGA Mux", WM8971_PWR1, 5, 0,
> - &wm8971_left_pga_controls),
> - SND_SOC_DAPM_MUX("Right PGA Mux", WM8971_PWR1, 4, 0,
> - &wm8971_right_pga_controls),
> - SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
> - &wm8971_left_line_controls),
> - SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
> - &wm8971_right_line_controls),
> -
> SND_SOC_DAPM_MUX("Left ADC Mux", SND_SOC_NOPM, 0, 0,
> &wm8971_monomux_controls),
> SND_SOC_DAPM_MUX("Right ADC Mux", SND_SOC_NOPM, 0, 0,
> @@ -385,6 +450,41 @@ static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
> SND_SOC_DAPM_INPUT("MIC"),
> };
>
> +static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
> + SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
> + &wm8971_left_line_controls),
> + SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
> + &wm8971_right_line_controls),
> + SND_SOC_DAPM_MUX("Left PGA Mux", WM8971_PWR1, 5, 0,
> + &wm8971_left_pga_controls),
> + SND_SOC_DAPM_MUX("Right PGA Mux", WM8971_PWR1, 4, 0,
> + &wm8971_right_pga_controls),
> +};
> +
> +static const struct snd_soc_dapm_widget wm8973_dapm_widgets[] = {
> + SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
> + &wm8973_left_line_controls),
> + SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
> + &wm8973_right_line_controls),
> + SND_SOC_DAPM_MUX("Right PGA Mux", WM8971_PWR1, 4, 0,
> + &wm8973_right_pga_controls),
> + SND_SOC_DAPM_MUX("Left PGA Mux", WM8971_PWR1, 5, 0,
> + &wm8973_left_pga_controls),
> + SND_SOC_DAPM_MUX("Out3 Mux", SND_SOC_NOPM, 0, 0,
> + &wm8973_out3_controls),
> + SND_SOC_DAPM_PGA("Out 3", WM8971_PWR2, 1, 0, NULL, 0),
> + SND_SOC_DAPM_MUX("Differential Mux", SND_SOC_NOPM, 0, 0,
> + &wm8973_diffmux_controls),
> +
> + SND_SOC_DAPM_OUTPUT("OUT3"),
> + SND_SOC_DAPM_OUTPUT("VREF"),
> +
> + SND_SOC_DAPM_INPUT("LINPUT2"),
> + SND_SOC_DAPM_INPUT("LINPUT3"),
> + SND_SOC_DAPM_INPUT("RINPUT2"),
> + SND_SOC_DAPM_INPUT("RINPUT3"),
> +};
> +
> static const struct snd_soc_dapm_route wm8971_dapm_routes[] = {
> /* left mixer */
> {"Left Mixer", "Playback Switch", "Left DAC"},
> @@ -425,27 +525,27 @@ static const struct snd_soc_dapm_route wm8971_dapm_routes[] = {
> {"MONO1", NULL, "Mono Out"},
>
> /* Left Line Mux */
> - {"Left Line Mux", "Line", "LINPUT1"},
> + {"Left Line Mux", "Line 1", "LINPUT1"},
> {"Left Line Mux", "PGA", "Left PGA Mux"},
> {"Left Line Mux", "Differential", "Differential Mux"},
>
> /* Right Line Mux */
> - {"Right Line Mux", "Line", "RINPUT1"},
> + {"Right Line Mux", "Line 1", "RINPUT1"},
> {"Right Line Mux", "Mic", "MIC"},
> {"Right Line Mux", "PGA", "Right PGA Mux"},
> {"Right Line Mux", "Differential", "Differential Mux"},
>
> /* Left PGA Mux */
> - {"Left PGA Mux", "Line", "LINPUT1"},
> + {"Left PGA Mux", "Line 1", "LINPUT1"},
> {"Left PGA Mux", "Differential", "Differential Mux"},
>
> /* Right PGA Mux */
> - {"Right PGA Mux", "Line", "RINPUT1"},
> + {"Right PGA Mux", "Line 1", "RINPUT1"},
> {"Right PGA Mux", "Differential", "Differential Mux"},
>
> /* Differential Mux */
> - {"Differential Mux", "Line", "LINPUT1"},
> - {"Differential Mux", "Line", "RINPUT1"},
> + {"Differential Mux", "Line 1", "LINPUT1"},
> + {"Differential Mux", "Line 1", "RINPUT1"},
>
> /* Left ADC Mux */
> {"Left ADC Mux", "Stereo", "Left PGA Mux"},
> @@ -462,6 +562,53 @@ static const struct snd_soc_dapm_route wm8971_dapm_routes[] = {
> {"Right ADC", NULL, "Right ADC Mux"},
> };
>
> +static const struct snd_soc_dapm_route wm8973_dapm_routes[] = {
> + {"Out3 Mux", "VREF", "VREF"},
> + {"Out3 Mux", "ROUT1 + Vol", "ROUT1"},
> + {"Out3 Mux", "ROUT1", "Right Mixer"},
> + {"Out3 Mux", "MonoOut", "MONO1"},
> + {"Out 3", NULL, "Out3 Mux"},
> + {"OUT3", NULL, "Out 3"},
> +
> + {"Left Line Mux", "Line 2", "LINPUT2"},
> + {"Left Line Mux", "Line 3", "LINPUT3"},
> +
> + {"Right Line Mux", "Line 2", "RINPUT2"},
> + {"Right Line Mux", "Line 3", "RINPUT3"},
> +
> + {"Left PGA Mux", "Line 2", "LINPUT2"},
> + {"Left PGA Mux", "Line 3", "LINPUT3"},
> +
> + {"Right PGA Mux", "Line 2", "RINPUT2"},
> + {"Right PGA Mux", "Line 3", "RINPUT3"},
> +
> + {"Differential Mux", "Line 2", "LINPUT2"},
> + {"Differential Mux", "Line 2", "RINPUT2"},
> +};
> +
> +static int wm897x_add_controls(struct snd_soc_codec *codec)
> +{
> + struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
> + struct snd_soc_dapm_context *dapm = &codec->dapm;
> +
> + if (wm8971->variant)
> + snd_soc_add_codec_controls(codec, wm8973_snd_controls,
> + ARRAY_SIZE(wm8973_snd_controls));
> +
> + if (wm8971->variant)
> + snd_soc_dapm_new_controls(dapm, wm8973_dapm_widgets,
> + ARRAY_SIZE(wm8973_dapm_widgets));
> + else
> + snd_soc_dapm_new_controls(dapm, wm8971_dapm_widgets,
> + ARRAY_SIZE(wm8971_dapm_widgets));
> +
> + if (wm8971->variant)
> + snd_soc_dapm_add_routes(dapm, wm8973_dapm_routes,
> + ARRAY_SIZE(wm8973_dapm_routes));
Perhaps one if rather than three? Also I think a switch on the
variant would be more idiomatic than an if.
> +
> + return 0;
> +}
> +
> struct _coeff_div {
> u32 mclk;
> u32 rate;
> @@ -722,12 +869,15 @@ static int wm8971_set_bias_level(struct snd_soc_codec *codec,
> enum snd_soc_bias_level level)
> {
> struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
> + static const u16 micbias[] = {0x00c1, 0x00c2};
> +
> u16 pwr_reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
>
> switch (level) {
> case SND_SOC_BIAS_ON:
> /* set vmid to 50k and unmute dac */
> - snd_soc_write(codec, WM8971_PWR1, pwr_reg | 0x00c1);
> + snd_soc_write(codec, WM8971_PWR1,
> + pwr_reg | micbias[wm8971->variant]);
> break;
> case SND_SOC_BIAS_PREPARE:
> break;
> @@ -762,21 +912,28 @@ static const struct snd_soc_dai_ops wm8971_dai_ops = {
> .set_sysclk = wm8971_set_dai_sysclk,
> };
>
> -static struct snd_soc_dai_driver wm8971_dai = {
> - .name = "wm8971-hifi",
> - .playback = {
> - .stream_name = "Playback",
> - .channels_min = 1,
> - .channels_max = 2,
> - .rates = WM8971_RATES,
> - .formats = WM8971_FORMATS,},
> - .capture = {
> - .stream_name = "Capture",
> - .channels_min = 1,
> - .channels_max = 2,
> - .rates = WM8971_RATES,
> - .formats = WM8971_FORMATS,},
> - .ops = &wm8971_dai_ops,
> +static struct snd_soc_dai_driver wm8971_dai[] = {
> + {
> + .name = "wm8971-hifi-playback",
> + .playback = {
> + .stream_name = "Playback",
> + .channels_min = 1,
> + .channels_max = 2,
> + .rates = WM8971_RATES,
> + .formats = WM8971_FORMATS,
> + },
> + .ops = &wm8971_dai_ops,
> + }, {
> + .name = "wm8971-hifi-capture",
> + .capture = {
> + .stream_name = "Capture",
> + .channels_min = 1,
> + .channels_max = 2,
> + .rates = WM8971_RATES,
> + .formats = WM8971_FORMATS,
> + },
> + .ops = &wm8971_dai_ops,
> + },
> };
>
> static int wm8971_suspend(struct snd_soc_codec *codec)
> @@ -805,10 +962,59 @@ static int wm8971_resume(struct snd_soc_codec *codec)
>
> static int wm8971_probe(struct snd_soc_codec *codec)
> {
> + struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
> + const u32 *p;
> int ret = 0;
> u16 reg;
>
> wm8971_reset(codec);
> + if (codec->dev->of_node) {
> + p = of_get_property(codec->dev->of_node, "mclk-div", NULL);
> + if (p)
> + wm8971->mclk_div = be32_to_cpu(*p);
> + }
> + /* Master Clock Divide by 2 (0 = not div, 1 = div by 2) */
> + if (wm8971->mclk_div)
> + snd_soc_update_bits(codec, WM8971_SRATE, 0x0040, 0x0040);
> +
> + /* Analouge Bias (0 = 1.8V, 1 = 2.5V, 2 = 3.3V) */
> + if (codec->dev->of_node) {
> + p = of_get_property(codec->dev->of_node, "anglouge-bias", NULL);
> + if (p)
> + wm8971->anglouge_bias = be32_to_cpu(*p);
> + }
> + switch (wm8971->anglouge_bias) {
> + case 0:
> + reg = snd_soc_read(codec, WM8971_ADCTL1) & 0xff3f;
> + snd_soc_write(codec, WM8971_ADCTL1, reg);
These look a little odd, snd_soc_update_bits instead?
> + break;
> + case 1:
> + reg = snd_soc_read(codec, WM8971_ADCTL1) & 0xff7f;
> + snd_soc_write(codec, WM8971_ADCTL1, reg);
> + case 2:
Perhaps either change this to default or add a default case that
reports the value is invalid.
> + /* Default */
> + break;
> + }
> +
> + /* Headphone Switch (0 = disabled, 1 = enabled) */
> + if (codec->dev->of_node) {
> + p = of_get_property(codec->dev->of_node, "headphone-en", NULL);
> + if (p)
> + wm8971->headphone_en = be32_to_cpu(*p);
See comment at the top but I would make this boolean and use
of_property_read_bool here.
> + }
> + if (wm8971->headphone_en)
> + snd_soc_update_bits(codec, WM8971_ADCTL2, 0x0040, 0x0040);
> +
> + /* Headphone Polarity (0 = HPDETECT high represent headphone,
> + * 1 = HPDETECT high represent speaker)
> + */
> + if (codec->dev->of_node) {
> + p = of_get_property(codec->dev->of_node, "headphone-pol", NULL);
> + if (p)
> + wm8971->headphone_pol = be32_to_cpu(*p);
> + }
> + if (wm8971->headphone_pol)
> + snd_soc_update_bits(codec, WM8971_ADCTL2, 0x0020, 0x0020);
>
> /* charge output caps - set vmid to 5k for quick power up */
> reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
> @@ -827,6 +1033,8 @@ static int wm8971_probe(struct snd_soc_codec *codec)
> snd_soc_update_bits(codec, WM8971_LINVOL, 0x0100, 0x0100);
> snd_soc_update_bits(codec, WM8971_RINVOL, 0x0100, 0x0100);
>
> + wm897x_add_controls(codec);
> +
> return ret;
> }
>
> @@ -847,8 +1055,8 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8971 = {
>
> .controls = wm8971_snd_controls,
> .num_controls = ARRAY_SIZE(wm8971_snd_controls),
> - .dapm_widgets = wm8971_dapm_widgets,
> - .num_dapm_widgets = ARRAY_SIZE(wm8971_dapm_widgets),
> + .dapm_widgets = wm897x_dapm_widgets,
> + .num_dapm_widgets = ARRAY_SIZE(wm897x_dapm_widgets),
> .dapm_routes = wm8971_dapm_routes,
> .num_dapm_routes = ARRAY_SIZE(wm8971_dapm_routes),
> };
> @@ -875,6 +1083,7 @@ static int wm8971_i2c_probe(struct i2c_client *i2c,
> return -ENOMEM;
>
> mutex_init(&wm8971->deemph_mutex);
> + wm8971->variant = (int)id->driver_data;
>
> wm8971->regmap = devm_regmap_init_i2c(i2c, &wm8971_regmap);
> if (IS_ERR(wm8971->regmap))
> @@ -883,7 +1092,7 @@ static int wm8971_i2c_probe(struct i2c_client *i2c,
> i2c_set_clientdata(i2c, wm8971);
>
> ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm8971,
> - &wm8971_dai, 1);
> + wm8971_dai, ARRAY_SIZE(wm8971_dai));
>
> return ret;
> }
> @@ -895,15 +1104,23 @@ static int wm8971_i2c_remove(struct i2c_client *client)
> }
>
> static const struct i2c_device_id wm8971_i2c_id[] = {
> - { "wm8971", 0 },
> + { "wm8971", VARIANT_WM8971 },
> + { "wm8973", VARIANT_WM8973 },
> { }
> };
> MODULE_DEVICE_TABLE(i2c, wm8971_i2c_id);
>
> +static const struct of_device_id wm897x_dt_ids[] = {
> + { .compatible = "wlf,wm8971" },
> + { .compatible = "wlf,wm8973" },
> + { /* sentinel */ }
> +};
> +
> static struct i2c_driver wm8971_i2c_driver = {
> .driver = {
> .name = "wm8971",
> .owner = THIS_MODULE,
> + .of_match_table = wm897x_dt_ids,
> },
> .probe = wm8971_i2c_probe,
> .remove = wm8971_i2c_remove,
> @@ -915,3 +1132,5 @@ module_i2c_driver(wm8971_i2c_driver);
> MODULE_DESCRIPTION("ASoC WM8971 driver");
> MODULE_AUTHOR("Lab126");
> MODULE_LICENSE("GPL");
> +MODULE_ALIAS("*wm8971*");
> +MODULE_ALIAS("*wm8973*");
> diff --git a/sound/soc/codecs/wm8971.h b/sound/soc/codecs/wm8971.h
> old mode 100644
> new mode 100755
> index f31c38f..aeab04a
> --- a/sound/soc/codecs/wm8971.h
> +++ b/sound/soc/codecs/wm8971.h
> @@ -22,21 +22,22 @@
> #define WM8971_ADCDAC 0x05
> #define WM8971_IFACE 0x07
> #define WM8971_SRATE 0x08
> -#define WM8971_LDAC 0x0a
> -#define WM8971_RDAC 0x0b
> -#define WM8971_BASS 0x0c
> +#define WM8971_LDAC 0x0a
> +#define WM8971_RDAC 0x0b
> +#define WM8971_BASS 0x0c
> #define WM8971_TREBLE 0x0d
> #define WM8971_RESET 0x0f
> -#define WM8971_ALC1 0x11
> -#define WM8971_ALC2 0x12
> -#define WM8971_ALC3 0x13
> +#define WM8973_3D 0x10
> +#define WM8971_ALC1 0x11
> +#define WM8971_ALC2 0x12
> +#define WM8971_ALC3 0x13
> #define WM8971_NGATE 0x14
> -#define WM8971_LADC 0x15
> -#define WM8971_RADC 0x16
> +#define WM8971_LADC 0x15
> +#define WM8971_RADC 0x16
> #define WM8971_ADCTL1 0x17
> #define WM8971_ADCTL2 0x18
> -#define WM8971_PWR1 0x19
> -#define WM8971_PWR2 0x1a
> +#define WM8971_PWR1 0x19
> +#define WM8971_PWR2 0x1a
> #define WM8971_ADCTL3 0x1b
> #define WM8971_ADCIN 0x1f
> #define WM8971_LADCIN 0x20
All these tabbing changes should really go in the coding
standards patch.
Thanks,
Charles
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHv4 1/9] Clean WM8971 through checkpatch
2014-09-17 8:41 [PATCHv4 1/9] Clean WM8971 through checkpatch Xavier Hsu
` (7 preceding siblings ...)
2014-09-17 8:41 ` [PATCHv4 9/9] ASOC add WM8973 support to WM8971 Xavier Hsu
@ 2014-09-22 12:35 ` Charles Keepax
2014-09-23 6:54 ` Xavier Hsu
8 siblings, 1 reply; 14+ messages in thread
From: Charles Keepax @ 2014-09-22 12:35 UTC (permalink / raw)
To: Xavier Hsu; +Cc: Andy Green, alsa-devel, patches, lars, patches
On Wed, Sep 17, 2014 at 04:41:07PM +0800, Xavier Hsu wrote:
> This patch improves WM8971.
> We clean the file through checkpatch.
>
> Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
> Signed-off-by: Andy Green <andy.green@linaro.org>
> ---
> Any comments about improving the patch are welcome.
> Thanks.
The commit messages could all use a little more detail and it
would be good to make the subject lines match the style of other
patches to this driver.
Thanks,
Charles
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHv4 1/9] Clean WM8971 through checkpatch
2014-09-22 12:35 ` [PATCHv4 1/9] Clean WM8971 through checkpatch Charles Keepax
@ 2014-09-23 6:54 ` Xavier Hsu
0 siblings, 0 replies; 14+ messages in thread
From: Xavier Hsu @ 2014-09-23 6:54 UTC (permalink / raw)
To: Charles Keepax
Cc: Andy Green, alsa-devel, patches, Lars-Peter Clausen,
Patch Tracking
Hi Charles :
Thanks for your feedback.
I will add more description in every patch.
BR,
Xavier
2014-09-22 20:35 GMT+08:00 Charles Keepax <
ckeepax@opensource.wolfsonmicro.com>:
> On Wed, Sep 17, 2014 at 04:41:07PM +0800, Xavier Hsu wrote:
> > This patch improves WM8971.
> > We clean the file through checkpatch.
> >
> > Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
> > Signed-off-by: Andy Green <andy.green@linaro.org>
> > ---
> > Any comments about improving the patch are welcome.
> > Thanks.
>
> The commit messages could all use a little more detail and it
> would be good to make the subject lines match the style of other
> patches to this driver.
>
> Thanks,
> Charles
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCHv4 7/9] WM8971 uses msleep to replace work queue
2014-09-22 12:16 ` Charles Keepax
@ 2014-09-24 7:37 ` Xavier Hsu
0 siblings, 0 replies; 14+ messages in thread
From: Xavier Hsu @ 2014-09-24 7:37 UTC (permalink / raw)
To: Charles Keepax
Cc: Andy Green, alsa-devel, patches, Lars-Peter Clausen,
Patch Tracking
Hi Charles :
Thanks for your feedback.
I will move msleep(1000) before I set bias level.
====================================================
msleep(1000);
wm8971_set_bias_level(codec, codec->dapm.bias_level);
====================================================
BR,
Xavier
2014-09-22 20:16 GMT+08:00 Charles Keepax <
ckeepax@opensource.wolfsonmicro.com>:
> On Wed, Sep 17, 2014 at 04:41:13PM +0800, Xavier Hsu wrote:
> > This patch improves WM8971.
> > We use msleep to replace work queue.
> > "As suggested by Mark Brown"
> >
> > Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
> > Signed-off-by: Andy Green <andy.green@linaro.org>
> > ---
> > Any comments about improving the patch are welcome.
> > Thanks.
> >
> > sound/soc/codecs/wm8971.c | 27 ++++-----------------------
> > 1 file changed, 4 insertions(+), 23 deletions(-)
> >
> > diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
> > index 5b38c7a..d081cae 100755
> > --- a/sound/soc/codecs/wm8971.c
> > +++ b/sound/soc/codecs/wm8971.c
> > @@ -36,8 +36,6 @@
> >
> > #define WM8971_REG_COUNT 43
> >
> > -static struct workqueue_struct *wm8971_workq;
> > -
> > /* codec private data */
> > struct wm8971_priv {
> > /* MCLK */
> > @@ -779,16 +777,6 @@ static struct snd_soc_dai_driver wm8971_dai = {
> > .ops = &wm8971_dai_ops,
> > };
> >
> > -static void wm8971_work(struct work_struct *work)
> > -{
> > - struct snd_soc_dapm_context *dapm =
> > - container_of(work, struct snd_soc_dapm_context,
> > - delayed_work.work);
> > - struct snd_soc_codec *codec = dapm->codec;
> > -
> > - wm8971_set_bias_level(codec, codec->dapm.bias_level);
> > -}
> > -
> > static int wm8971_suspend(struct snd_soc_codec *codec)
> > {
> > wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
> > @@ -806,8 +794,8 @@ static int wm8971_resume(struct snd_soc_codec *codec)
> > reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
> > snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
> > codec->dapm.bias_level = SND_SOC_BIAS_ON;
> > - queue_delayed_work(wm8971_workq, &codec->dapm.delayed_work,
> > - msecs_to_jiffies(1000));
> > + wm8971_set_bias_level(codec, codec->dapm.bias_level);
> > + msleep(1000);
> > }
> >
> > return 0;
> > @@ -818,19 +806,14 @@ static int wm8971_probe(struct snd_soc_codec
> *codec)
> > int ret = 0;
> > u16 reg;
> >
> > - INIT_DELAYED_WORK(&codec->dapm.delayed_work, wm8971_work);
> > - wm8971_workq = create_workqueue("wm8971");
> > - if (wm8971_workq == NULL)
> > - return -ENOMEM;
> > -
> > wm8971_reset(codec);
> >
> > /* charge output caps - set vmid to 5k for quick power up */
> > reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
> > snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
> > codec->dapm.bias_level = SND_SOC_BIAS_STANDBY;
> > - queue_delayed_work(wm8971_workq, &codec->dapm.delayed_work,
> > - msecs_to_jiffies(1000));
> > + wm8971_set_bias_level(codec, codec->dapm.bias_level);
> > + msleep(1000);
>
> Before this patch the bias_level change is after the delay, after
> this patch the change is before the delay? That doesn't seem
> right?
>
> >
> > /* set the update bits */
> > snd_soc_update_bits(codec, WM8971_LDAC, 0x0100, 0x0100);
> > @@ -850,8 +833,6 @@ static int wm8971_remove(struct snd_soc_codec *codec)
> > {
> > wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
> >
> > - if (wm8971_workq)
> > - destroy_workqueue(wm8971_workq);
> > return 0;
> > }
> >
> > --
> > 1.7.9.5
> >
>
> Thanks,
> Charles
>
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2014-09-24 7:37 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-09-17 8:41 [PATCHv4 1/9] Clean WM8971 through checkpatch Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 2/9] WM8971 modifies the control of deemphasis Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 3/9] WM8971 uses SOC_ENUM_SINGLE_DECL to replace SOC_ENUM_SINGLE Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 4/9] WM8971 uses TLV information Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 5/9] Improve wm8971_set_dai_fmt Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 6/9] Using the constraint based on wm8971_set_dai_sysclk Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 7/9] WM8971 uses msleep to replace work queue Xavier Hsu
2014-09-22 12:16 ` Charles Keepax
2014-09-24 7:37 ` Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 8/9] WM8971 uses regcache_sync to replace snd_soc_cache_sync Xavier Hsu
2014-09-17 8:41 ` [PATCHv4 9/9] ASOC add WM8973 support to WM8971 Xavier Hsu
2014-09-22 12:34 ` Charles Keepax
2014-09-22 12:35 ` [PATCHv4 1/9] Clean WM8971 through checkpatch Charles Keepax
2014-09-23 6:54 ` Xavier Hsu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).