From: Nicolin Chen <nicoleotsuka@gmail.com>
To: Fabio Estevam <festevam@gmail.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
alsa-devel@alsa-project.org, broonie@kernel.org
Subject: Re: [PATCH 1/2] ASoC: fsl_spdif: Use dev_name() for registering the irq
Date: Mon, 29 Dec 2014 19:06:39 -0800 [thread overview]
Message-ID: <20141230030638.GB2870@Alpha> (raw)
In-Reply-To: <1419904356-6865-1-git-send-email-festevam@gmail.com>
On Mon, Dec 29, 2014 at 11:52:35PM -0200, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> The 'name' array is currently stored inside the fsl_spdif_priv private structure
> only for registering the interrupt name.
>
> This can be simplified by registering it with dev_name() instead.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
For both patches.
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Thank you
Nicolin
> ---
> sound/soc/fsl/fsl_spdif.c | 15 +++------------
> 1 file changed, 3 insertions(+), 12 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
> index af042942..73da1f0 100644
> --- a/sound/soc/fsl/fsl_spdif.c
> +++ b/sound/soc/fsl/fsl_spdif.c
> @@ -90,7 +90,6 @@ struct spdif_mixer_control {
> * @sysclk: system clock for rx clock rate measurement
> * @dma_params_tx: DMA parameters for transmit channel
> * @dma_params_rx: DMA parameters for receive channel
> - * @name: driver name
> */
> struct fsl_spdif_priv {
> struct spdif_mixer_control fsl_spdif_control;
> @@ -109,12 +108,8 @@ struct fsl_spdif_priv {
> struct clk *sysclk;
> struct snd_dmaengine_dai_dma_data dma_params_tx;
> struct snd_dmaengine_dai_dma_data dma_params_rx;
> -
> - /* The name space will be allocated dynamically */
> - char name[0];
> };
>
> -
> /* DPLL locked and lock loss interrupt handler */
> static void spdif_irq_dpll_lock(struct fsl_spdif_priv *spdif_priv)
> {
> @@ -1169,19 +1164,15 @@ static int fsl_spdif_probe(struct platform_device *pdev)
> if (!np)
> return -ENODEV;
>
> - spdif_priv = devm_kzalloc(&pdev->dev,
> - sizeof(struct fsl_spdif_priv) + strlen(np->name) + 1,
> - GFP_KERNEL);
> + spdif_priv = devm_kzalloc(&pdev->dev, sizeof(*spdif_priv), GFP_KERNEL);
> if (!spdif_priv)
> return -ENOMEM;
>
> - strcpy(spdif_priv->name, np->name);
> -
> spdif_priv->pdev = pdev;
>
> /* Initialize this copy of the CPU DAI driver structure */
> memcpy(&spdif_priv->cpu_dai_drv, &fsl_spdif_dai, sizeof(fsl_spdif_dai));
> - spdif_priv->cpu_dai_drv.name = spdif_priv->name;
> + spdif_priv->cpu_dai_drv.name = dev_name(&pdev->dev);
>
> /* Get the addresses and IRQ */
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -1203,7 +1194,7 @@ static int fsl_spdif_probe(struct platform_device *pdev)
> }
>
> ret = devm_request_irq(&pdev->dev, irq, spdif_isr, 0,
> - spdif_priv->name, spdif_priv);
> + dev_name(&pdev->dev), spdif_priv);
> if (ret) {
> dev_err(&pdev->dev, "could not claim irq %u\n", irq);
> return ret;
> --
> 1.9.1
>
next prev parent reply other threads:[~2014-12-30 3:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-30 1:52 [PATCH 1/2] ASoC: fsl_spdif: Use dev_name() for registering the irq Fabio Estevam
2014-12-30 1:52 ` [PATCH 2/2] ASoC: fsl_asrc: " Fabio Estevam
2014-12-30 3:06 ` Nicolin Chen [this message]
2014-12-30 11:27 ` [PATCH 1/2] ASoC: fsl_spdif: " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141230030638.GB2870@Alpha \
--to=nicoleotsuka@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=fabio.estevam@freescale.com \
--cc=festevam@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox