From: Simon Horman <horms@verge.net.au>
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Magnus Damm <magnus.damm@gmail.com>,
linux-sh@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
alsa-devel@alsa-project.org
Subject: Re: [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format
Date: Wed, 11 Feb 2015 09:28:05 +0900 [thread overview]
Message-ID: <20150211002802.GC7826@verge.net.au> (raw)
In-Reply-To: <87d25wg804.wl%kuninori.morimoto.gx@renesas.com>
On Fri, Jan 30, 2015 at 05:18:56AM +0000, Kuninori Morimoto wrote:
>
> Hi Lars, Simon
>
> > The DAI link format should be specified for the whole link rather than just
> > one component on the link. So move the format specification for the HDMI
> > audio link from the CPU component to the link itself.
> >
> > Since the sh-mobile-hdmi DAI driver doesn't implement the set_fmt() callback
> > in this case there is no functional difference between only specifying the
> > the format for the CPU side or for the whole link, but the later it will
> > allow us to remove support for just specifying the format for one component.
> >
> > Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> > ---
>
> I tested these 3 patches on armadillo800eva
>
> [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format
> [PATCH v2 2/3] ASoC: sh: fsi: Fix clock inversion
> [PATCH v2 3/3] ASoC: simple-card: Remove support for setting differing DAI formats
>
> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> 2/3 patch changed behavior for clock inversion on FSI driver.
> FSI + wm8978 on armadillo800eva worked without any issues,
> but, I don't know how much effect it has for other board.
> We used this inversion flags on each board for historical reasons (copy-paste),
> but, almost all these were not needed (except some picky board) on FSI.
> Maybe Lars's 2/3 patch is correct, but, it is difficult to check/confirm for all boards.
> And unfortunately, Renesas don't use FSI anymore.
> So, I think keeping current FSI driver as-is is more safety for old boards.
> armadillo800eva works well with below patch (as 2/3 patch)
Thanks, I am inclined to agree that it is best to leave things unchanged.
>
> --------------
> diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
> index 75de26c..36aaeb1 100644
> --- a/arch/arm/mach-shmobile/board-armadillo800eva.c
> +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
> @@ -1015,7 +1015,6 @@ static struct asoc_simple_card_info fsi_wm8978_info = {
> .platform = "sh_fsi2",
> .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
> .cpu_dai = {
> - .fmt = SND_SOC_DAIFMT_IB_NF,
> .name = "fsia-dai",
> },
> .codec_dai = {
> --------------
>
next prev parent reply other threads:[~2015-02-11 0:28 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-21 13:38 [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format Lars-Peter Clausen
2015-01-21 13:38 ` [PATCH v2 2/3] ASoC: sh: fsi: Fix clock inversion Lars-Peter Clausen
2016-01-29 15:52 ` Geert Uytterhoeven
2015-01-21 13:38 ` [PATCH v2 3/3] ASoC: simple-card: Remove support for setting differing DAI formats Lars-Peter Clausen
2015-01-27 0:58 ` [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format Simon Horman
2015-01-27 7:40 ` Kuninori Morimoto
2015-01-27 8:19 ` Lars-Peter Clausen
2015-01-27 23:52 ` Kuninori Morimoto
2015-01-30 1:25 ` Simon Horman
2015-01-30 5:18 ` Kuninori Morimoto
2015-02-11 0:28 ` Simon Horman [this message]
2015-02-27 0:23 ` Kuninori Morimoto
2015-03-22 18:52 ` Mark Brown
2015-03-23 7:00 ` Kuninori Morimoto
2015-03-23 21:12 ` Mark Brown
2015-03-24 0:07 ` Kuninori Morimoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150211002802.GC7826@verge.net.au \
--to=horms@verge.net.au \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).