Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vinod.koul@intel.com>
To: Mark Brown <broonie@kernel.org>
Cc: liam.r.girdwood@linux.intel.com, tiwai@suse.de,
	alsa-devel@alsa-project.org,
	"Subhransu S. Prusty" <subhransu.s.prusty@intel.com>,
	patches.audio@intel.com
Subject: Re: [RFC 2/9] ASoC: hda: Add IPC library for SKL platform
Date: Wed, 22 Apr 2015 09:24:53 +0530	[thread overview]
Message-ID: <20150422035453.GE2738@intel.com> (raw)
In-Reply-To: <20150420215639.GY14892@sirena.org.uk>


[-- Attachment #1.1: Type: text/plain, Size: 3110 bytes --]

On Mon, Apr 20, 2015 at 10:56:39PM +0100, Mark Brown wrote:
> On Fri, Apr 17, 2015 at 06:46:00PM +0530, Vinod Koul wrote:
> 
> > +
> > +/* IPC data */
> > +struct ssth_ipc {
> > +	struct device *dev;
> > +	struct ssth_lib *dsp;
> > +
> > +/* IPC messaging */
> > +	struct list_head tx_list;
> 
> Lots of odd indentation of comments in this code (well, several examples
> I noticed so far anyway).
> 
> > +	if (ret == 0)
> > +		ret = -ETIMEDOUT;
> > +	else {
> > +	/* copy the data returned from DSP */
> 
> Coding style - { } on both sides of the if (and the comments again).
Ah sorry about that, I did try to fix style issues in code but looks like
few were missed. I will fix them in the patch series.
> 
> > +		if (msg->rx_size) {
> > +			if (rx_data)
> > +				memcpy(rx_data, msg->rx_data, msg->rx_size);
> > +			else
> > +				dev_err(ipc->dev, "error: no output buffer");
> > +		}
> > +		ret = msg->errno;
> > +	}
> > +
> > +	ssth_ipc_msg_put_empty(ipc, msg);
> > +
> > +	spin_unlock_irqrestore(&ipc->ipc_lock, irq_flags);
> 
> Can we pop the message off the list, release the lock and then copy?
> That way we can avoid having interrupts disabled while we do the
> memcpy().  In general there seems to be a lot of interrupts disabled
> copying going on (which is there for some of the other drivers too)
> which might be avoidable.
Thanks for pointing, yes this should be done.
> 
> > +static void ssth_ipc_reply_remove(struct ssth_ipc *ipc, struct ssth_ipc_message *msg)
> > +{
> > +	unsigned long irq_flags;
> > +
> > +	spin_lock_irqsave(&ipc->ipc_lock, irq_flags);
> > +	if (list_empty(&ipc->rx_list)) {
> > +		dev_dbg(ipc->dev, "empty rx list");
> > +		goto out;
> > +	}
> > +	list_del(&msg->list);
> > +
> > +out:
> > +	spin_unlock_irqrestore(&ipc->ipc_lock, irq_flags);
> > +}
> 
> Are we expecting to not find the message/
For reply case, I am not sure. I think if thats true would make sense to
complain loudly..

> 
> > +	if (IPC_GLB_NOTIFI_MSG_TYPE(header.primary)) {
> > +		switch (IPC_GLB_NOTIFI_TYPE(header.primary)) {
> > +		case IPC_GLB_NOTIFCATION_GLITCH:
> > +			break;
> > +		case IPC_GLB_NOTIFCATION_OVERRUN:
> > +			break;
> > +		case IPC_GLB_NOTIFCATION_UNDERRUN:
> > +			dev_dbg(ipc->dev, "FW UNDERRUN\n");
> > +			break;
> > +		case IPC_GLB_NOTIFCATION_END_STREAM:
> > +			break;
> > +		case IPC_GLB_NOTIFCATION_PHRASE_DETECTED:
> > +			break;
> > +		case IPC_GLB_NOTIFCATION_RESOURCE_EVENT:
> > +			dev_dbg(ipc->dev, "MCPS Budget Violation\n");
> > +			break;
> > +		case IPC_GLB_NOTIFCATION_LOG_BUFFER_STATUS:
> > +			break;
> > +		case IPC_GLB_NOTIFCATION_TIMESTAMP_CAPTURED:
> > +			break;
> > +		case IPC_GLB_NOTIFCATION_FW_READY:
> > +			ipc->boot_complete = true;
> > +			wake_up(&ipc->boot_wait);
> > +			break;
> 
> More prints perhaps?  _PHRASE_DETECTED looks interesting, as does
> _OVERRUN.
Overrun is FW detectiong its pipelines are overunning the buffer, no the
ALSA ring buffer though. _PHRASE_DETECTED is for keyword detection which can
run on dsp

Thanks
-- 
~Vinod

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]



  reply	other threads:[~2015-04-22  3:57 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-17 13:15 [RFC 0/9] Add SKL ipc handling code Vinod Koul
2015-04-17 13:15 ` [RFC 1/9] ASoC: hda: Add helper to read/write to dsp mmio space Vinod Koul
2015-04-20 21:46   ` Mark Brown
2015-04-22  3:50     ` Vinod Koul
2015-04-24 17:33       ` Mark Brown
2015-04-26 14:34         ` Vinod Koul
2015-04-27 21:02           ` Mark Brown
2015-04-29 11:03             ` Vinod Koul
2015-04-17 13:16 ` [RFC 2/9] ASoC: hda: Add IPC library for SKL platform Vinod Koul
2015-04-20 21:56   ` Mark Brown
2015-04-22  3:54     ` Vinod Koul [this message]
2015-04-24 17:34       ` Mark Brown
2015-04-26 14:36         ` Vinod Koul
2015-04-17 13:16 ` [RFC 3/9] ASoC: hda: Add config option for SKL ipc library Vinod Koul
2015-04-17 13:16 ` [RFC 4/9] ASoC: hda: Add DSP init and boot up functionality Vinod Koul
2015-04-24 17:11   ` Mark Brown
2015-04-26 14:21     ` Vinod Koul
2015-04-17 13:16 ` [RFC 5/9] ASoC: hda: Add dsp loader ops Vinod Koul
2015-04-17 13:16 ` [RFC 6/9] ASoC: hda: Add Code Loader DMA support Vinod Koul
2015-04-24 17:18   ` Mark Brown
2015-04-26 14:28     ` Vinod Koul
2015-04-27 14:17       ` Mark Brown
2015-04-29 11:08         ` Vinod Koul
2015-04-17 13:16 ` [RFC 7/9] ASoC: hda: Add DSP library functions for SKL platform Vinod Koul
2015-04-17 13:16 ` [RFC 8/9] ASoC: hda: Add for CL DMA interrupt handling Vinod Koul
2015-04-24 17:30   ` Mark Brown
2015-04-26 14:28     ` Vinod Koul
2015-04-17 13:16 ` [RFC 9/9] ASoC: hda: Export API to change DSP power state Vinod Koul
2015-04-24 17:33   ` Mark Brown
2015-04-20 21:44 ` [RFC 0/9] Add SKL ipc handling code Mark Brown
2015-04-22  4:00   ` Vinod Koul
2015-04-22 11:19     ` Liam Girdwood
2015-04-22 15:53       ` Vinod Koul
2015-04-22 19:06         ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150422035453.GE2738@intel.com \
    --to=vinod.koul@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=patches.audio@intel.com \
    --cc=subhransu.s.prusty@intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox