From: Vinod Koul <vinod.koul@intel.com>
To: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
Takashi Iwai <tiwai@suse.de>,
"Lin, Mengdong" <mengdong.lin@intel.com>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Mark Brown <broonie@kernel.org>
Subject: Re: [RFC] File format for topology data
Date: Wed, 22 Apr 2015 21:28:16 +0530 [thread overview]
Message-ID: <20150422155816.GK2738@intel.com> (raw)
In-Reply-To: <1429621606.3793.37.camel@loki>
On Tue, Apr 21, 2015 at 02:06:46PM +0100, Liam Girdwood wrote:
> I've pasted below the topology data for the broadwell firmware using the
> text file format being used by UCM. Using the UCM format allows to to
> share parser code and allows us to also have UCM define topology data.
>
> I've not yet completed the byte or enum controls but the rest of the
> data is there for comments. I've also included the recent channel
> changes suggested in the UAPI header comments.
>
> # Firmware Topology Configuration for Broadwell
>
> # TLV scale used by both global and stream volumes
> SectionTLV."hsw_vol_tlv" {
>
> DBScale [
> min "-9000"
> step "300"
> mute "1"
> ]
> }
So for our DSP we need to pass some private data, how do we go about
describing it for this and other controls?
>
> # Controls from default pipeline
> SectionControl."Default Pipeline" {
>
> Index "1"
>
> # Master DSP volume
> Mixer [
> name "Master Playback Volume"
> Channel.0 [
> map "Left"
> reg "0"
> shift "0"
> ]
> Channel.1 [
> map "Right"
> reg "0"
> shift "8"
> ]
> max "31"
> invert "false"
> get "0"
> put "0"
what do these two mean?
> tlv_array "hsw_vol_tlv"
> ]
>
> # Offload 0 volume
> Mixer [
> name "Media0 Playback Volume"
> Channel.0 [
> map "Left"
> reg "1"
> shift "0"
> ]
> Channel.1 [
> map "Right"
> reg "1"
> shift "8"
> ]
> max "31"
> invert "false"
> get "1"
> put "1"
> tlv_array "hsw_vol_tlv"
> ]
>
> # Enum controls
> Enum [
> ...
> ]
>
> # Byte controls
> Bytes [
> ...
> ]
> }
>
> # DAPM Widgets for main pipeline
> SectionWidget."Pipeline1" {
>
> Index "1"
>
> AIF_IN [
> name "SSP0 CODEC IN"
> stream_name ""
> slot ""
> reg "0"
> shift "0"
> invert "false"
> ]
>
> AIF_OUT [
> name "SSP0 CODEC OUT"
> stream_name ""
> slot ""
> reg "0"
> shift "0"
> invert "false"
> ]
>
> ...
> }
>
> # DAPM Routes
> SectionGraph."Pipeline 1 Graph" {
>
> Index 1
>
> Routes [
> "Playback VMixer, , System Playback"
> "Playback VMixer, , Offload0 Playback"
> "Playback VMixer, , Offload1 Playback"
> "SSP0 CODEC OUT, , Playback VMixer"
> "Analog Capture, , SSP0 CODEC IN"
> ]
> }
>
> # PCM Configurations supported by FW
> SectionPCMConfig."PCM 48k Stereo 24bit" {
>
> Playback [
> format "S24_LE"
> rate "48000"
> channels "2"
> tdm_slot "0xf"
> ]
>
> Capture [
> format "S24_LE"
> rate "48000"
> channels "2"
> tdm_slot "0xf"
>
> ]
> }
>
> SectionPCMConfig."PCM 48k Stereo 16bit" {
>
> Playback [
> format "S16_LE"
> rate "48000"
> channels "2"
> tdm_slot "0xf"
> ]
>
> Capture [
> format "S16_LE"
> rate "48000"
> channels "2"
> tdm_slot "0xf"
>
> ]
> }
>
> SectionPCMConfig."PCM 48k 2P/4C 16bit" {
>
> Playback [
> format "S16_LE"
> rate "48000"
> channels "2"
> tdm_slot "0xf"
> ]
>
> Capture [
> format "S16_LE"
> rate "48000"
> channels "4"
> tdm_slot "0xf"
>
> ]
> }
>
> # PCM capabilities supported by FW
> SectionPCMCapabilities."System Playback" {
>
> Capabilities [
> formats "S24_LE, S16_LE"
> rate_min "48000"
> rate_max "48000"
> channels_min "2"
> channels_max "2"
> ]
> }
>
> SectionPCMCapabilities."Analog Capture" {
>
> Capabilities [
> formats "S24_LE, S16_LE"
> rate_min "48000"
> rate_max "48000"
> channels_min "2"
> channels_max "4"
> ]
> }
>
> SectionPCMCapabilities."Offload Pin Playback" {
>
> Capabilities [
> formats "S24_LE, S16_LE"
> rate_min "8000"
> rate_max "192000"
> channels_min "2"
> channels_max "2"
> ]
> }
>
> SectionPCMCapabilities."Loopback Capture" {
>
> Capabilities [
> formats "S16_LE"
> rate_min "48000"
> rate_max "48000"
> channels_min "2"
> channels_max "2"
> ]
> }
>
> # PCM devices exported by Firmware
> SectionPCM."System Pin" {
>
> Index 1
>
> Playback [
> Capabilities "System Playback"
> Config "PCM 48k Stereo 24bit"
> Config "PCM 48k Stereo 16bit"
> ]
>
> Capture [
> Capabilities "Analog Capture"
> Config "PCM 48k Stereo 24bit"
> Config "PCM 48k Stereo 16bit"
> Config "PCM 48k 2P/4C 16bit"
> ]
> }
Is this a FE or a BE? How about Dailinks?
--
~Vinod
>
> SectionPCM."Offload Pin 0" {
>
> Index 1
>
> Playback [
> Capabilities "Offload Pin Playback"
> Config "PCM 48k Stereo 24bit"
> Config "PCM 48k Stereo 16bit"
> ]
> }
>
> SectionPCM."Offload Pin 1" {
>
> Index 1
>
> Playback [
> Capabilities "Offload Pin Playback"
> Config "PCM 48k Stereo 24bit"
> Config "PCM 48k Stereo 16bit"
> ]
> }
>
> SectionPCM."Loopback Pin" {
>
> Index 1
>
> Capture [
> Capabilities "Loopback Capture"
> Config "PCM 48k Stereo 16bit"
> ]
> }
>
--
next prev parent reply other threads:[~2015-04-22 16:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-21 13:06 [RFC] File format for topology data Liam Girdwood
2015-04-22 15:58 ` Vinod Koul [this message]
2015-04-23 1:11 ` Liam Girdwood
2015-04-23 3:42 ` Vinod Koul
2015-04-22 18:44 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150422155816.GK2738@intel.com \
--to=vinod.koul@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=liam.r.girdwood@linux.intel.com \
--cc=mengdong.lin@intel.com \
--cc=peter.ujfalusi@ti.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox