From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: Sergej Sawazki <ce3a@gmx.de>
Cc: alsa-devel@alsa-project.org, broonie@kernel.org,
lgirdwood@gmail.com, lars@metafoo.de,
patches@opensource.wolfsonmicro.com
Subject: Re: [RFC PATCH] ASoC: wm8741: Add differential mono mode support
Date: Mon, 4 May 2015 09:02:58 +0100 [thread overview]
Message-ID: <20150504080258.GV3480@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1430504037-7170-1-git-send-email-ce3a@gmx.de>
On Fri, May 01, 2015 at 08:13:57PM +0200, Sergej Sawazki wrote:
> The WM8741 DAC supports several differential output modes (stereo,
> stereo reversed, mono left, mono right). Add platform data and DT
> bindings to configure it.
>
> Signed-off-by: Sergej Sawazki <ce3a@gmx.de>
> ---
> Documentation/devicetree/bindings/sound/wm8741.txt | 11 ++
> sound/soc/codecs/wm8741.c | 129 ++++++++++++++++++---
> sound/soc/codecs/wm8741.h | 10 ++
> 3 files changed, 137 insertions(+), 13 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/sound/wm8741.txt b/Documentation/devicetree/bindings/sound/wm8741.txt
> index 74bda58..a133154 100644
> --- a/Documentation/devicetree/bindings/sound/wm8741.txt
> +++ b/Documentation/devicetree/bindings/sound/wm8741.txt
> @@ -10,9 +10,20 @@ Required properties:
> - reg : the I2C address of the device for I2C, the chip select
> number for SPI.
>
> +Optional properties:
> +
> + - diff-mode: Differential output mode configuration. Default value for field
> + DIFF in register R8 (MODE_CONTROL_2). If absent, the default is 0, shall be:
> + 0 = stereo
> + 1 = mono left
> + 2 = stereo reversed
> + 3 = mono right
> +
> Example:
>
> codec: wm8741@1a {
> compatible = "wlf,wm8741";
> reg = <0x1a>;
> +
> + diff-mode = <3>;
> };
> diff --git a/sound/soc/codecs/wm8741.c b/sound/soc/codecs/wm8741.c
> index 9e71c76..9b777a6 100644
> --- a/sound/soc/codecs/wm8741.c
> +++ b/sound/soc/codecs/wm8741.c
> @@ -41,6 +41,7 @@ static const char *wm8741_supply_names[WM8741_NUM_SUPPLIES] = {
>
> /* codec private data */
> struct wm8741_priv {
> + struct wm8741_platform_data pdata;
> struct regmap *regmap;
> struct regulator_bulk_data supplies[WM8741_NUM_SUPPLIES];
> unsigned int sysclk;
> @@ -87,13 +88,27 @@ static int wm8741_reset(struct snd_soc_codec *codec)
> static const DECLARE_TLV_DB_SCALE(dac_tlv_fine, -12700, 13, 0);
> static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 400, 0);
>
> -static const struct snd_kcontrol_new wm8741_snd_controls[] = {
> +static const struct snd_kcontrol_new wm8741_snd_controls_stereo[] = {
> SOC_DOUBLE_R_TLV("Fine Playback Volume", WM8741_DACLLSB_ATTENUATION,
> WM8741_DACRLSB_ATTENUATION, 1, 255, 1, dac_tlv_fine),
> SOC_DOUBLE_R_TLV("Playback Volume", WM8741_DACLMSB_ATTENUATION,
> WM8741_DACRMSB_ATTENUATION, 0, 511, 1, dac_tlv),
> };
>
> +static const struct snd_kcontrol_new wm8741_snd_controls_mono_left[] = {
> +SOC_SINGLE_TLV("Fine Playback Volume Left", WM8741_DACLLSB_ATTENUATION,
> + 1, 255, 1, dac_tlv_fine),
> +SOC_SINGLE_TLV("Playback Volume Left", WM8741_DACLMSB_ATTENUATION,
> + 0, 511, 1, dac_tlv),
> +};
> +
> +static const struct snd_kcontrol_new wm8741_snd_controls_mono_right[] = {
> + SOC_SINGLE_TLV("Fine Playback Volume Right", WM8741_DACRLSB_ATTENUATION,
> + 1, 255, 1, dac_tlv_fine),
> + SOC_SINGLE_TLV("Playback Volume Right", WM8741_DACRMSB_ATTENUATION,
> + 0, 511, 1, dac_tlv),
> +};
> +
Tabbing here could use being fixed, but functionally the change
looks fine to me.
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Thanks,
Charles
next prev parent reply other threads:[~2015-05-04 8:02 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-01 18:13 [RFC PATCH] ASoC: wm8741: Add differential mono mode support Sergej Sawazki
2015-05-04 8:02 ` Charles Keepax [this message]
2015-05-04 11:25 ` Mark Brown
2015-05-04 19:03 ` Sergej Sawazki
2015-05-05 11:22 ` Mark Brown
2015-05-05 12:19 ` Sergej Sawazki
2015-05-05 13:57 ` Mark Brown
2015-05-05 14:07 ` Sergej Sawazki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150504080258.GV3480@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=ce3a@gmx.de \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox