From: Sergey Kiselev <sergey.kiselev@intel.com>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>,
alsa-devel@alsa-project.org, Mark Brown <broonie@kernel.org>,
Richard Fitzgerald <rf@opensource.wolfsonmicro.com>,
patches@opensource.wolfsonmicro.com
Subject: Re: [PATCH] ASoC: wm8731: initialize the hardware when loading the codec driver; use regmap for I/O
Date: Tue, 2 Jun 2015 11:33:18 -0700 [thread overview]
Message-ID: <20150602113318.918151bd4112a407da314099@intel.com> (raw)
In-Reply-To: <556C1FCD.1070905@metafoo.de>
Hi,
I generated a new patch that fixes the issues indicated by Lars.
On Mon, 1 Jun 2015 11:03:09 +0200
Lars-Peter Clausen <lars@metafoo.de> wrote:
> It looks like the patch has been made against an older tree. It will
> not apply on-top of ASoC for-next branch.
>
Rebased.
> There is no need to replace all the snd_soc_${io}() calls with
> regmap_${io}(). The snd_soc methods will just call the corresponding
> regmap method internally. But if you really want to do it this should
> be done in a separate patch.
>
I kept the snd_soc_${io} except of reset and wm8731_hw_init, that are called before codec is registered (so snd_soc_${io} can't be used there). I'll generate a separate patch for regmap transistion.
> This is not necessary, the core will put the CODEC into BIAS_STANDBY
> mode, after the probe callback has been called. So the whole probe
> function can be dropped.
>
>
> Same here, the core already puts the CODEC into BIAS_OFF mode before
> the remove callback is called.
>
wm8731_probe and wm8731_remove callbacks removed.
This patch moves the request supplies and hardware reset and initialization from wm8731_probe to wm8731_i2c_probe and wm8731_spi_probe. So that the codec hardware is initialized when loading the codec driver, and not when loading the machine driver.
Signed-off-by: Sergey Kiselev <sergey.kiselev@intel.com>
---
wm8731.c | 82 +++++++++++++++++++++++++++++++++++++++------------------------
1 file changed, 52 insertions(+), 30 deletions(-)
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 915ea11..8b19205 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -84,7 +84,7 @@ static bool wm8731_writeable(struct device *dev, unsigned int reg)
return reg <= WM8731_RESET;
}
-#define wm8731_reset(c) snd_soc_write(c, WM8731_RESET, 0)
+#define wm8731_reset(m) regmap_write(m, WM8731_RESET, 0)
static const char *wm8731_input_select[] = {"Line In", "Mic"};
@@ -571,44 +571,48 @@ static struct snd_soc_dai_driver wm8731_dai = {
.symmetric_rates = 1,
};
-static int wm8731_probe(struct snd_soc_codec *codec)
+static int wm8731_request_supplies(struct device *dev,
+ struct wm8731_priv *wm8731)
{
- struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
int ret = 0, i;
for (i = 0; i < ARRAY_SIZE(wm8731->supplies); i++)
wm8731->supplies[i].supply = wm8731_supply_names[i];
- ret = devm_regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8731->supplies),
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(wm8731->supplies),
wm8731->supplies);
if (ret != 0) {
- dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+ dev_err(dev, "Failed to request supplies: %d\n", ret);
return ret;
}
ret = regulator_bulk_enable(ARRAY_SIZE(wm8731->supplies),
wm8731->supplies);
if (ret != 0) {
- dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+ dev_err(dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
- ret = wm8731_reset(codec);
+ return 0;
+}
+
+static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
+{
+ int ret = 0;
+
+ ret = wm8731_reset(wm8731->regmap);
if (ret < 0) {
- dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
+ dev_err(dev, "Failed to issue reset: %d\n", ret);
goto err_regulator_enable;
}
- snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
- /* Latch the update bits */
- snd_soc_update_bits(codec, WM8731_LOUT1V, 0x100, 0);
- snd_soc_update_bits(codec, WM8731_ROUT1V, 0x100, 0);
- snd_soc_update_bits(codec, WM8731_LINVOL, 0x100, 0);
- snd_soc_update_bits(codec, WM8731_RINVOL, 0x100, 0);
+ /* Clear POWEROFF, keep everything else disabled */
+ regmap_write(wm8731->regmap, WM8731_PWR, 0x7f);
/* Disable bypass path by default */
- snd_soc_update_bits(codec, WM8731_APANA, 0x8, 0);
+ regmap_update_bits(wm8731->regmap, WM8731_APANA, 0x8, 0);
+
+ regcache_mark_dirty(wm8731->regmap);
/* Regulators will have been enabled by bias management */
regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
@@ -621,19 +625,7 @@ err_regulator_enable:
return ret;
}
-/* power down chip */
-static int wm8731_remove(struct snd_soc_codec *codec)
-{
- struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
-
- regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
-
- return 0;
-}
-
static struct snd_soc_codec_driver soc_codec_dev_wm8731 = {
- .probe = wm8731_probe,
- .remove = wm8731_remove,
.set_bias_level = wm8731_set_bias_level,
.suspend_bias_off = true,
@@ -690,6 +682,13 @@ static int wm8731_spi_probe(struct spi_device *spi)
mutex_init(&wm8731->lock);
+ spi_set_drvdata(spi, wm8731);
+
+ ret = wm8731_request_supplies(&spi->dev, wm8731);
+ if (ret != 0) {
+ return ret;
+ }
+
wm8731->regmap = devm_regmap_init_spi(spi, &wm8731_regmap);
if (IS_ERR(wm8731->regmap)) {
ret = PTR_ERR(wm8731->regmap);
@@ -698,7 +697,10 @@ static int wm8731_spi_probe(struct spi_device *spi)
return ret;
}
- spi_set_drvdata(spi, wm8731);
+ ret = wm8731_hw_init(&spi->dev, wm8731);
+ if (ret != 0) {
+ return ret;
+ }
ret = snd_soc_register_codec(&spi->dev,
&soc_codec_dev_wm8731, &wm8731_dai, 1);
@@ -712,7 +714,12 @@ static int wm8731_spi_probe(struct spi_device *spi)
static int wm8731_spi_remove(struct spi_device *spi)
{
+ struct wm8731_priv *wm8731 = spi_get_drvdata(spi);
+
snd_soc_unregister_codec(&spi->dev);
+
+ regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
+
return 0;
}
@@ -754,6 +761,13 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
mutex_init(&wm8731->lock);
+ i2c_set_clientdata(i2c, wm8731);
+
+ ret = wm8731_request_supplies(&i2c->dev, wm8731);
+ if (ret != 0) {
+ return ret;
+ }
+
wm8731->regmap = devm_regmap_init_i2c(i2c, &wm8731_regmap);
if (IS_ERR(wm8731->regmap)) {
ret = PTR_ERR(wm8731->regmap);
@@ -762,7 +776,10 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
return ret;
}
- i2c_set_clientdata(i2c, wm8731);
+ ret = wm8731_hw_init(&i2c->dev, wm8731);
+ if (ret != 0) {
+ return ret;
+ }
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8731, &wm8731_dai, 1);
@@ -776,7 +793,12 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
static int wm8731_i2c_remove(struct i2c_client *client)
{
+ struct wm8731_priv *wm8731 = i2c_get_clientdata(client);
+
snd_soc_unregister_codec(&client->dev);
+
+ regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
+
return 0;
}
--
Sergey
next prev parent reply other threads:[~2015-06-02 18:33 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-30 7:34 [PATCH] ASoC: wm8731: initialize the hardware when loading the codec driver; use regmap for I/O Sergey Kiselev
2015-06-01 9:03 ` Lars-Peter Clausen
2015-06-02 18:33 ` Sergey Kiselev [this message]
2015-06-02 20:12 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150602113318.918151bd4112a407da314099@intel.com \
--to=sergey.kiselev@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lars@metafoo.de \
--cc=liam.r.girdwood@linux.intel.com \
--cc=patches@opensource.wolfsonmicro.com \
--cc=rf@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox