Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Sergey Kiselev <sergey.kiselev@intel.com>
To: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org, Lars-Peter Clausen <lars@metafoo.de>,
	patches@opensource.wolfsonmicro.com,
	Liam Girdwood <liam.r.girdwood@linux.intel.com>,
	Charles Keepax <ckeepax@opensource.wolfsonmicro.com>,
	Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Subject: [PATCH v2] ASoC: wm8731: initialize the hardware when loading the codec driver
Date: Fri, 5 Jun 2015 11:55:27 -0700	[thread overview]
Message-ID: <20150605115527.d7c116e0dfbc751f066d417c@intel.com> (raw)

From: Sergey Kiselev <sergey.kiselev@intel.com>

This patch moves the requesting supplies, hardware reset and
initialization from wm8731_probe to wm8731_i2c_probe and wm8731_spi_probe.
So that the codec hardware is initialized when loading the codec driver,
and not when loading the machine driver. This avoids unnecesary hardware
resets and re-initializations when re-loading the machine driver.

Signed-off-by: Sergey Kiselev <sergey.kiselev@intel.com>
---
 sound/soc/codecs/wm8731.c | 74 +++++++++++++++++++++++++++--------------------
 1 file changed, 42 insertions(+), 32 deletions(-)

diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 915ea11..f22935a 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -84,7 +84,7 @@ static bool wm8731_writeable(struct device *dev, unsigned int reg)
 	return reg <= WM8731_RESET;
 }
 
-#define wm8731_reset(c)	snd_soc_write(c, WM8731_RESET, 0)
+#define wm8731_reset(m)	regmap_write(m, WM8731_RESET, 0)
 
 static const char *wm8731_input_select[] = {"Line In", "Mic"};
 
@@ -571,69 +571,63 @@ static struct snd_soc_dai_driver wm8731_dai = {
 	.symmetric_rates = 1,
 };
 
-static int wm8731_probe(struct snd_soc_codec *codec)
+static int wm8731_request_supplies(struct device *dev,
+		struct wm8731_priv *wm8731)
 {
-	struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
 	int ret = 0, i;
 
 	for (i = 0; i < ARRAY_SIZE(wm8731->supplies); i++)
 		wm8731->supplies[i].supply = wm8731_supply_names[i];
 
-	ret = devm_regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8731->supplies),
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(wm8731->supplies),
 				 wm8731->supplies);
 	if (ret != 0) {
-		dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+		dev_err(dev, "Failed to request supplies: %d\n", ret);
 		return ret;
 	}
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(wm8731->supplies),
 				    wm8731->supplies);
 	if (ret != 0) {
-		dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+		dev_err(dev, "Failed to enable supplies: %d\n", ret);
 		return ret;
 	}
 
-	ret = wm8731_reset(codec);
+	return 0;
+}
+
+static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
+{
+	int ret = 0;
+
+	ret = wm8731_reset(wm8731->regmap);
 	if (ret < 0) {
-		dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
+		dev_err(dev, "Failed to issue reset: %d\n", ret);
 		goto err_regulator_enable;
 	}
 
-	snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	/* Clear POWEROFF, keep everything else disabled */
+	regmap_write(wm8731->regmap, WM8731_PWR, 0x7f);
 
 	/* Latch the update bits */
-	snd_soc_update_bits(codec, WM8731_LOUT1V, 0x100, 0);
-	snd_soc_update_bits(codec, WM8731_ROUT1V, 0x100, 0);
-	snd_soc_update_bits(codec, WM8731_LINVOL, 0x100, 0);
-	snd_soc_update_bits(codec, WM8731_RINVOL, 0x100, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_LOUT1V, 0x100, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_ROUT1V, 0x100, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_LINVOL, 0x100, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_RINVOL, 0x100, 0);
 
 	/* Disable bypass path by default */
-	snd_soc_update_bits(codec, WM8731_APANA, 0x8, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_APANA, 0x8, 0);
 
-	/* Regulators will have been enabled by bias management */
-	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
-
-	return 0;
+	regcache_mark_dirty(wm8731->regmap);
 
 err_regulator_enable:
+	/* Regulators will be enabled by bias management */
 	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
 
 	return ret;
 }
 
-/* power down chip */
-static int wm8731_remove(struct snd_soc_codec *codec)
-{
-	struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
-
-	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
-
-	return 0;
-}
-
 static struct snd_soc_codec_driver soc_codec_dev_wm8731 = {
-	.probe =	wm8731_probe,
-	.remove =	wm8731_remove,
 	.set_bias_level = wm8731_set_bias_level,
 	.suspend_bias_off = true,
 
@@ -690,6 +684,12 @@ static int wm8731_spi_probe(struct spi_device *spi)
 
 	mutex_init(&wm8731->lock);
 
+	spi_set_drvdata(spi, wm8731);
+
+	ret = wm8731_request_supplies(&spi->dev, wm8731);
+	if (ret != 0)
+		return ret;
+
 	wm8731->regmap = devm_regmap_init_spi(spi, &wm8731_regmap);
 	if (IS_ERR(wm8731->regmap)) {
 		ret = PTR_ERR(wm8731->regmap);
@@ -698,7 +698,9 @@ static int wm8731_spi_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	spi_set_drvdata(spi, wm8731);
+	ret = wm8731_hw_init(&spi->dev, wm8731);
+	if (ret != 0)
+		return ret;
 
 	ret = snd_soc_register_codec(&spi->dev,
 			&soc_codec_dev_wm8731, &wm8731_dai, 1);
@@ -754,6 +756,12 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
 
 	mutex_init(&wm8731->lock);
 
+	i2c_set_clientdata(i2c, wm8731);
+
+	ret = wm8731_request_supplies(&i2c->dev, wm8731);
+	if (ret != 0)
+		return ret;
+
 	wm8731->regmap = devm_regmap_init_i2c(i2c, &wm8731_regmap);
 	if (IS_ERR(wm8731->regmap)) {
 		ret = PTR_ERR(wm8731->regmap);
@@ -762,7 +770,9 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	i2c_set_clientdata(i2c, wm8731);
+	ret = wm8731_hw_init(&i2c->dev, wm8731);
+	if (ret != 0)
+		return ret;
 
 	ret = snd_soc_register_codec(&i2c->dev,
 			&soc_codec_dev_wm8731, &wm8731_dai, 1);
-- 
1.9.1

             reply	other threads:[~2015-06-05 18:55 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-05 18:55 Sergey Kiselev [this message]
2015-06-08  9:23 ` [PATCH v2] ASoC: wm8731: initialize the hardware when loading the codec driver Charles Keepax
2015-06-08 18:01 ` Mark Brown
2015-06-08 19:34   ` Sergey Kiselev
2015-07-07 11:53     ` Mark Brown
2015-07-07 13:58 ` Applied "ASoC: wm8731: initialize the hardware when loading the codec driver" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150605115527.d7c116e0dfbc751f066d417c@intel.com \
    --to=sergey.kiselev@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=lars@metafoo.de \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=rf@opensource.wolfsonmicro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox