Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Shengjiu Wang <shengjiu.wang@freescale.com>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: tiwai@suse.de, alsa-devel@alsa-project.org, broonie@kernel.org,
	lgirdwood@gmail.com
Subject: Re: [PATCH] ASoC: dapm: Don't check dummy dai in soc_dapm_dai_stream_event
Date: Fri, 3 Jul 2015 14:59:26 +0800	[thread overview]
Message-ID: <20150703065925.GB17206@shlinux2> (raw)
In-Reply-To: <5596421B.7080400@metafoo.de>

On Fri, Jul 03, 2015 at 10:04:43AM +0200, Lars-Peter Clausen wrote:
> On 07/03/2015 08:54 AM, Shengjiu Wang wrote:
> >On Thu, Jul 02, 2015 at 01:19:47PM +0200, Lars-Peter Clausen wrote:
> >>On 07/02/2015 11:32 AM, Shengjiu Wang wrote:
> >>>On Thu, Jul 02, 2015 at 11:54:25AM +0200, Lars-Peter Clausen wrote:
> >>>>On 07/02/2015 11:23 AM, Lars-Peter Clausen wrote:
> >>>>>On 06/17/2015 05:41 AM, Shengjiu Wang wrote:
> >>>>>>Dummy dai can be used by multiple sound card. But it only belong to one
> >>>>>>card's dapm list. If another card use it, there will be dapm_assert_locked
> >>>>>>warning.
> >>>>>>
> >>>>>>[   20.015782] WARNING: CPU: 1 PID: 661 at sound/soc/soc-dapm.c:124
> >>>>>>dapm_assert_locked.isra.36+0x4c/0x58()
> >>>>>>[   20.025249] Modules linked in:
> >>>>>>[   20.028349] CPU: 1 PID: 661 Comm: aplay Not tainted
> >>>>>>4.1.0-rc6-next-20150605-00004-gaee05d8-dirty #92
> >>>>>>[   20.037528] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
> >>>>>>[   20.044110] Backtrace:
> >>>>>>[   20.046614] [<80012e00>] (dump_backtrace) from [<80012fa0>]
> >>>>>>(show_stack+0x18/0x1c)
> >>>>>>[   20.054229]  r6:809e8060 r5:00000000 r4:00000000 r3:00000000
> >>>>>>[   20.060002] [<80012f88>] (show_stack) from [<807a0f74>]
> >>>>>>(dump_stack+0x80/0x9c)
> >>>>>>[   20.067293] [<807a0ef4>] (dump_stack) from [<8002b144>]
> >>>>>>(warn_slowpath_common+0x7c/0xb4)
> >>>>>>[   20.075427]  r5:0000007c r4:00000000
> >>>>>>[   20.079065] [<8002b0c8>] (warn_slowpath_common) from [<8002b1a0>]
> >>>>>>(warn_slowpath_null+0x24/0x2c)
> >>>>>>[   20.087898]  r8:00000001 r7:88007c28 r6:ed94a680 r5:809e83e4 r4:ed83d6c0
> >>>>>>[   20.094747] [<8002b17c>] (warn_slowpath_null) from [<8058403c>]
> >>>>>>(dapm_assert_locked.isra.36+0x4c/0x58)
> >>>>>>[   20.104101] [<80583ff0>] (dapm_assert_locked.isra.36) from [<805842ec>]
> >>>>>>(dapm_mark_dirty+0x64/0xa4)
> >>>>>>[   20.113165] [<80584288>] (dapm_mark_dirty) from [<805853a8>]
> >>>>>>(soc_dapm_dai_stream_event.isra.42+0x30/0xc8)
> >>>>>>[   20.122863]  r8:ed9b5dbc r7:00000000 r6:00000001 r5:00000001 r4:ed83d6c0
> >>>>>>[   20.129706] [<80585378>] (soc_dapm_dai_stream_event.isra.42) from
> >>>>>>[<80587e28>] (snd_soc_dapm_stream_event+0x78/0xa0)
> >>>>>>[   20.140264]  r5:ee2ee62c r4:00000001
> >>>>>>[   20.143918] [<80587db0>] (snd_soc_dapm_stream_event) from [<8058957c>]
> >>>>>>(soc_pcm_prepare+0x138/0x21c)
> >>>>>>[   20.153058]  r8:ed8d9480 r7:00000000 r6:ed9b0e00 r5:00000001
> >>>>>>r4:ee2ee62c r3:00000000
> >>>>>>...
> >>>>>>
> >>>>>>Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
> >>>>>>---
> >>>>>>  sound/soc/soc-dapm.c |    3 +++
> >>>>>>  1 file changed, 3 insertions(+)
> >>>>>>
> >>>>>>diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
> >>>>>>index aa327c9..b618541 100644
> >>>>>>--- a/sound/soc/soc-dapm.c
> >>>>>>+++ b/sound/soc/soc-dapm.c
> >>>>>>@@ -3856,6 +3856,9 @@ static void soc_dapm_dai_stream_event(struct
> >>>>>>snd_soc_dai *dai, int stream,
> >>>>>>  {
> >>>>>>      struct snd_soc_dapm_widget *w;
> >>>>>>
> >>>>>>+    if (snd_soc_dai_is_dummy(dai))
> >>>>>>+        return;
> >>>>>>+
> >>>>>
> >>>>>While this will silence the lockdep warning the underlying issue is still
> >>>>>there. When the dummy DAI is used in multiple cards for each card a set of
> >>>>>widgets is created for the DAI which is then stored in
> >>>>>dai->playback/capture_widget. This means the second card will overwrite the
> >>>>>widgets created by the first card.
> >>>>>
> >>>>>The correct way to fix this is to not create any widgets for the dummy DAI.
> >>>>>This also means you can remove the dummy check in
> >>>>>dapm_connect_dai_link_widgets().
> >>>>
> >>>>Btw. this should affect more than just DAPM, if you have the dummy
> >>>>DAI in multiple cards the dummy CODEC ends up getting attached to
> >>>>both cards which should result in the component and CODEC list
> >>>>getting corrupted.
> >>>
> >>>Why you think the codec list should be corrupted? I didn't meet this
> >>>corruption. I check the codec list, there is only one "snd-soc-dummy" in it.
> >>
> >>I guess what avoids this is that we check component->probed and
> >>don't probe again if it already has been probed. But there are still
> >>assumptions all-throughout ASoC that assume that a CODEC is only
> >>part of exactly one card. The dummy CODEC will need special handling
> >>to make sure that it doesn't get added to any card.
> >>
> >>- Lars
> >>
> >I think that don't probe component which is dummy may reach the target. In
> >this case we don't need to check the dummy dai in snd_soc_dapm_new_dai_widgets.
> 
> Yes.
>
ok, I will send updated patch.

best regards
wang shengjiu 

      reply	other threads:[~2015-07-03  8:08 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-17  3:41 [PATCH] ASoC: dapm: Don't check dummy dai in soc_dapm_dai_stream_event Shengjiu Wang
2015-07-02  8:05 ` Shengjiu Wang
2015-07-02  9:23 ` Lars-Peter Clausen
2015-07-02  9:54   ` Lars-Peter Clausen
2015-07-02  9:32     ` Shengjiu Wang
2015-07-02 11:19       ` Lars-Peter Clausen
2015-07-03  6:54         ` Shengjiu Wang
2015-07-03  8:04           ` Lars-Peter Clausen
2015-07-03  6:59             ` Shengjiu Wang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150703065925.GB17206@shlinux2 \
    --to=shengjiu.wang@freescale.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lars@metafoo.de \
    --cc=lgirdwood@gmail.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox