From: Michele Curti <michele.curti@gmail.com>
To: Marco Bodega <bo.the.lynx@gmail.com>
Cc: alsa-devel@alsa-project.org, bjorse@gmail.com,
Takashi Iwai <tiwai@suse.de>,
juergen.bausa@online.de, Luka Karinja <luka.karinja@gmail.com>,
Liam Girdwood <liam.r.girdwood@linux.intel.com>,
Vinod Koul <vinod.koul@intel.com>,
"Nikula, Jarkko" <jarkko.nikula@intel.com>,
Bard Liao <bardliao@realtek.com>
Subject: Re: writing an alsa driver
Date: Fri, 24 Jul 2015 22:54:33 +0200 [thread overview]
Message-ID: <20150724205433.GA478@asus> (raw)
In-Reply-To: <CALnZUeg3=AB0vXS-TaOG=qe0W2f2r4wFVQKnqKxM=6mD0O-YcA@mail.gmail.com>
On Wed, Jul 22, 2015 at 10:05:36PM +0200, Marco Bodega wrote:
> Hi all,
>
> I own an Asus x205ta too and I really want to help to make this audio
> card works.
> I'm using linux next with Michele Curti's patch (as of 23 june)
>
Great! Good to know that you are working on this driver. I did no
progress since then because I stopped working on it..
>
> but it's bounded to sst1 as i see from disassembling acpi data:
> cat dsdt.dsl:
> [...]
> Device (SSP1)
> {
>
...
>
> however the fw is tied to work with SSP0.
> What can i do?
>
SSP2
http://permalink.gmane.org/gmane.linux.alsa.devel/140328
future versions of the firmware should support SSP1
>
>
> Is everything that I've done correct?
> I see in these output logs many of the errors and bugs that the other
> users found.
> [ 7.145429] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 0 doesn't have DAPM widget!!!
> [ 7.145461] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 1 doesn't have DAPM widget!!!
> [ 7.145488] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 2 doesn't have DAPM widget!!!
> [ 7.145517] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 3 doesn't have DAPM widget!!!
> [ 7.145540] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_0 doesn't have DAPM widget!!!
> [ 7.145565] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_1 doesn't have DAPM widget!!!
> [ 7.145592] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_0 doesn't have DAPM widget!!!
> [ 7.145621] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_1 doesn't have DAPM widget!!!
Yep, Vinod will check these
http://permalink.gmane.org/gmane.linux.alsa.devel/140564
Regards,
Michele
next prev parent reply other threads:[~2015-07-24 20:54 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-22 20:05 writing an alsa driver Marco Bodega
2015-07-24 20:54 ` Michele Curti [this message]
-- strict thread matches above, loose matches on Subject: below --
2015-08-10 14:12 Johnny
2015-05-21 14:52 Michele Curti
2015-05-23 16:32 ` Michele Curti
2015-05-27 6:45 ` Takashi Iwai
2015-05-27 8:54 ` Michele Curti
2015-05-27 18:41 ` Liam Girdwood
2015-05-27 20:13 ` Michele Curti
2015-05-28 11:31 ` Liam Girdwood
2015-05-28 12:53 ` Michele Curti
2015-05-28 13:21 ` Liam Girdwood
2015-05-28 19:17 ` Michele Curti
2015-05-29 9:42 ` Liam Girdwood
2015-05-29 13:17 ` Michele Curti
2015-06-01 11:06 ` Liam Girdwood
2015-06-04 7:09 ` Marcus Bannerman
2015-06-04 9:04 ` Michele Curti
2015-06-04 8:59 ` Michele Curti
2015-06-04 10:33 ` Liam Girdwood
2015-06-04 17:44 ` Juergen Bausa
2015-06-04 19:39 ` Michele Curti
2015-06-05 7:00 ` Jarkko Nikula
2015-06-08 8:26 ` Michele Curti
2015-06-08 8:49 ` Michele Curti
2015-06-13 13:47 ` Luka Karinja
2015-06-15 16:46 ` Michele Curti
2015-06-15 17:04 ` Liam Girdwood
2015-06-16 20:50 ` Michele Curti
2015-06-17 9:16 ` Liam Girdwood
2015-06-17 21:34 ` Michele Curti
2015-06-18 11:14 ` Vinod Koul
2015-06-18 18:47 ` Michele Curti
2015-06-19 7:54 ` Vinod Koul
2015-06-19 8:12 ` Michele Curti
2015-06-17 6:39 ` Jarkko Nikula
2015-06-23 9:09 ` Michele Curti
2015-06-23 9:51 ` Liam Girdwood
2015-06-24 10:21 ` Vinod Koul
2015-06-24 11:31 ` Antonio Ospite
2015-06-24 11:40 ` Liam Girdwood
2015-06-24 16:04 ` Vinod Koul
2015-06-24 18:21 ` Michele Curti
2015-06-25 3:24 ` Vinod Koul
2015-06-25 7:39 ` Michele Curti
2016-03-03 11:11 ` Michele Curti
2016-03-03 11:27 ` Vinod Koul
2016-03-03 13:08 ` Michele Curti
2016-03-03 16:20 ` Pierre-Louis Bossart
2016-03-04 11:07 ` Michele Curti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150724205433.GA478@asus \
--to=michele.curti@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=bardliao@realtek.com \
--cc=bjorse@gmail.com \
--cc=bo.the.lynx@gmail.com \
--cc=jarkko.nikula@intel.com \
--cc=juergen.bausa@online.de \
--cc=liam.r.girdwood@linux.intel.com \
--cc=luka.karinja@gmail.com \
--cc=tiwai@suse.de \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).