alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Zidan Wang <zidan.wang@freescale.com>
To: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: alsa-devel@alsa-project.org, broonie@kernel.org,
	patches@opensource.wolfsonmicro.com
Subject: Re: [PATCH 1/2] ASoC: wm8960: correct the min gain value of some PGA
Date: Thu, 10 Sep 2015 09:15:32 +0800	[thread overview]
Message-ID: <20150910011529.GA13451@shlinux2> (raw)
In-Reply-To: <20150909114954.GA30013@edi-sw-dsktp001.ad.cirrus.com>

On Wed, Sep 09, 2015 at 12:49:54PM +0100, Charles Keepax wrote:
> On Wed, Sep 09, 2015 at 07:29:10PM +0800, Zidan Wang wrote:
> > The min gain is the corresponding gain value when the register value is 0
> > instead of 1, just correct it.
> > 
> > Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
> > ---
> >  sound/soc/codecs/wm8960.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
> > index e3b7d0c..6163474 100644
> > --- a/sound/soc/codecs/wm8960.c
> > +++ b/sound/soc/codecs/wm8960.c
> > @@ -211,11 +211,11 @@ static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
> >  	return wm8960_set_deemph(codec);
> >  }
> >  
> > -static const DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 50, 0);
> > -static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1);
> > +static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1);
> > +static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
> 
> The value zero is used for digital mute here. So I don't think it
> is really appropriate to extend the TLV to show it as -97.5dB or
> -127.5dB.

I think the min register value will corresponding to the min gain.
So value 0 will also have a gain value, although it's for digital mute.

Refer to wm8962 codec driver, beep gain range is -90db~-6db, step in 6db,
but it define the beep gain like below:
static const DECLARE_TLV_DB_SCALE(beep_tlv, -9600, 600, 1);

Best Regards,
Zidan Wang
> 
> >  static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0);
> >  static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
> > -static const DECLARE_TLV_DB_SCALE(boost_tlv, -1200, 300, 1);
> > +static const DECLARE_TLV_DB_SCALE(boost_tlv, -1500, 300, 1);
> 
> Same here.
> 
> >  
> >  static const struct snd_kcontrol_new wm8960_snd_controls[] = {
> >  SOC_DOUBLE_R_TLV("Capture Volume", WM8960_LINVOL, WM8960_RINVOL,
> > -- 
> > 1.9.1
> 
> Thanks,
> Charles

  reply	other threads:[~2015-09-10  2:27 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-09 11:29 [PATCH 1/2] ASoC: wm8960: correct the min gain value of some PGA Zidan Wang
2015-09-09 11:29 ` [PATCH 2/2] ASoC: wm8960: correct gain value for input PGA and add microphone PGA Zidan Wang
2015-09-09 12:02   ` Charles Keepax
2015-09-10  1:20     ` Zidan Wang
2015-09-10  8:20       ` Charles Keepax
2015-09-10  8:21   ` Charles Keepax
2015-09-09 11:49 ` [PATCH 1/2] ASoC: wm8960: correct the min gain value of some PGA Charles Keepax
2015-09-10  1:15   ` Zidan Wang [this message]
2015-09-10  8:24     ` Charles Keepax
2015-09-10 10:58       ` Mark Brown
2015-09-10 11:35         ` Charles Keepax

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150910011529.GA13451@shlinux2 \
    --to=zidan.wang@freescale.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=patches@opensource.wolfsonmicro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).