From: Danny Milosavljevic <dannym-bxPqe3T81XXwRsdMLXbzog@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
Jaroslav Kysela <perex-/Fr2/VpizcU@public.gmane.org>,
Takashi Iwai <tiwai-IBi9RG/b67k@public.gmane.org>,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH v7 1/2] sun4i-codec: Add FM, Line and Mic inputs
Date: Sat, 19 Dec 2015 03:57:14 +0100 [thread overview]
Message-ID: <20151219035714.295a969b@dayas> (raw)
In-Reply-To: <20151219034511.372575d3@dayas>
This is the first part:
sun4i-codec: make it possible to use different codec_widgets for A10 and A20.
Signed-off-by: Danny Milosavljevic <dannym+a-bxPqe3T81XXwRsdMLXbzog@public.gmane.org>
---
b/sound/soc/sunxi/sun4i-codec.c | 45 ++++++++++++++++++++++++++++++----------
1 file changed, 34 insertions(+), 11 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index e6cc6a1..6628e6e 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -96,8 +96,9 @@
/* Other various ADC registers */
#define SUN4I_CODEC_DAC_TXCNT (0x30)
#define SUN4I_CODEC_ADC_RXCNT (0x34)
-#define SUN4I_CODEC_AC_SYS_VERI (0x38)
-#define SUN4I_CODEC_AC_MIC_PHONE_CAL (0x3c)
+
+#define SUN7I_CODEC_AC_DAC_CAL (0x38)
+#define SUN7I_CODEC_AC_MIC_PHONE_CAL (0x3c)
struct sun4i_codec {
struct device *dev;
@@ -509,10 +510,13 @@ static const struct snd_kcontrol_new sun4i_codec_pa_mute =
static DECLARE_TLV_DB_SCALE(sun4i_codec_pa_volume_scale, -6300, 100, 1);
-static const struct snd_kcontrol_new sun4i_codec_widgets[] = {
- SOC_SINGLE_TLV("Power Amplifier Volume", SUN4I_CODEC_DAC_ACTL,
- SUN4I_CODEC_DAC_ACTL_PA_VOL, 0x3F, 0,
- sun4i_codec_pa_volume_scale),
+#define SUN4I_COMMON_CODEC_WIDGETS \
+ SOC_SINGLE_TLV("Power Amplifier Volume", SUN4I_CODEC_DAC_ACTL,\
+ SUN4I_CODEC_DAC_ACTL_PA_VOL, 0x3F, 0,\
+ sun4i_codec_pa_volume_scale)
+
+static const struct snd_kcontrol_new sun4i_codec_widgets_a10[] = {
+ SUN4I_COMMON_CODEC_WIDGETS,
};
static const struct snd_kcontrol_new sun4i_codec_left_mixer_controls[] = {
@@ -627,9 +631,9 @@ static const struct snd_soc_dapm_route sun4i_codec_codec_dapm_routes[] = {
{ "Mic1", NULL, "VMIC" },
};
-static struct snd_soc_codec_driver sun4i_codec_codec = {
- .controls = sun4i_codec_widgets,
- .num_controls = ARRAY_SIZE(sun4i_codec_widgets),
+static struct snd_soc_codec_driver sun4i_codec_codec_a10 = {
+ .controls = sun4i_codec_widgets_a10,
+ .num_controls = ARRAY_SIZE(sun4i_codec_widgets_a10),
.dapm_widgets = sun4i_codec_codec_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(sun4i_codec_codec_dapm_widgets),
.dapm_routes = sun4i_codec_codec_dapm_routes,
@@ -680,7 +684,7 @@ static const struct regmap_config sun4i_codec_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
- .max_register = SUN4I_CODEC_AC_MIC_PHONE_CAL,
+ .max_register = SUN7I_CODEC_AC_MIC_PHONE_CAL,
};
static const struct of_device_id sun4i_codec_of_match[] = {
@@ -753,10 +757,24 @@ static struct snd_soc_card *sun4i_codec_create_card(struct device *dev)
return card;
};
+static const struct snd_kcontrol_new sun7i_codec_widgets[] = {
+ SUN4I_COMMON_CODEC_WIDGETS,
+};
+
+static struct snd_soc_codec_driver sun7i_codec_codec = {
+ .controls = sun7i_codec_widgets,
+ .num_controls = ARRAY_SIZE(sun7i_codec_widgets),
+ .dapm_widgets = sun4i_codec_codec_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(sun4i_codec_codec_dapm_widgets),
+ .dapm_routes = sun4i_codec_codec_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(sun4i_codec_codec_dapm_routes),
+};
+
static int sun4i_codec_probe(struct platform_device *pdev)
{
struct snd_soc_card *card;
struct sun4i_codec *scodec;
+ struct snd_soc_codec_driver *codec;
struct resource *res;
void __iomem *base;
int ret;
@@ -819,7 +837,12 @@ static int sun4i_codec_probe(struct platform_device *pdev)
scodec->capture_dma_data.maxburst = 4;
scodec->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
- ret = snd_soc_register_codec(&pdev->dev, &sun4i_codec_codec,
+ if (of_device_is_compatible(pdev->dev.of_node,
+ "allwinner,sun7i-a20-codec"))
+ codec = &sun7i_codec_codec;
+ else
+ codec = &sun4i_codec_codec_a10;
+ ret = snd_soc_register_codec(&pdev->dev, codec,
&sun4i_codec_dai, 1);
if (ret) {
dev_err(&pdev->dev, "Failed to register our codec\n");
next prev parent reply other threads:[~2015-12-19 2:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-19 2:45 [PATCH v7 0/2] sun4i-codec: Add FM, Line and Mic inputs Danny Milosavljevic
2015-12-19 2:57 ` Danny Milosavljevic [this message]
2015-12-19 2:59 ` [PATCH v7 2/2] " Danny Milosavljevic
2015-12-21 1:06 ` Yassin Jaffer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151219035714.295a969b@dayas \
--to=dannym-bxpqe3t81xxwrsdmlxbzog@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=perex-/Fr2/VpizcU@public.gmane.org \
--cc=tiwai-IBi9RG/b67k@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).