Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolin Chen <nicoleotsuka@gmail.com>
To: Fabio Estevam <festevam@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>,
	alsa-devel@alsa-project.org, broonie@kernel.org,
	shawnguo@kernel.org, brain@jikos.cz
Subject: Re: [PATCH v3 2/2] ASoC: fsl_sai: Allow setting the SAI MCLK direction
Date: Wed, 4 May 2016 16:11:49 -0700	[thread overview]
Message-ID: <20160504231148.GB17009@Asurada-Nvidia> (raw)
In-Reply-To: <1462401239-995-2-git-send-email-festevam@gmail.com>

On Wed, May 04, 2016 at 07:33:59PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
> 
> On mx6ul the General Purpose Register 1 (GPR1) contains the following
> bits for configuring the direction of the SAI MCLKs:
> SAI1_MCLK_DIR, SAI2_MCLK_DIR, SAI3_MCLK_DIR
> 
> Introduce  the "fsl,sai-mclk-direction-output" optional property to allow
> configuring the SAI_MCLK outputs.
> 
> Tested on a imx6ul-evk board.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>

Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>

Thank you
Nicolin

> ---
> Changes since v2:
> - Use of_alias_get_id() (Nicolin)
> 
>  Documentation/devicetree/bindings/sound/fsl-sai.txt |  5 +++++
>  include/linux/mfd/syscon/imx6q-iomuxc-gpr.h         |  6 ++++++
>  sound/soc/fsl/fsl_sai.c                             | 20 ++++++++++++++++++++
>  3 files changed, 31 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> index 777b941..740b467 100644
> --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
> +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> @@ -48,6 +48,11 @@ Required properties:
>  			  receive data by following their own bit clocks and
>  			  frame sync clocks separately.
>  
> +Optional properties (for mx6ul):
> +
> +  - fsl,sai-mclk-direction-output: This is a boolean property. If present,
> +			 indicates that SAI will output the SAI MCLK clock.
> +
>  Note:
>  - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
>    default synchronous mode (sync Rx with Tx) will be used, which means both
> diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
> index 238c8db..6835382 100644
> --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
> +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
> @@ -447,5 +447,11 @@
>  #define IMX6UL_GPR1_ENET2_CLK_OUTPUT		(0x1 << 18)
>  #define IMX6UL_GPR1_ENET_CLK_DIR		(0x3 << 17)
>  #define IMX6UL_GPR1_ENET_CLK_OUTPUT		(0x3 << 17)
> +#define IMX6UL_GPR1_SAI1_MCLK_DIR		(0x1 << 19)
> +#define IMX6UL_GPR1_SAI2_MCLK_DIR		(0x1 << 20)
> +#define IMX6UL_GPR1_SAI3_MCLK_DIR		(0x1 << 21)
> +#define IMX6UL_GPR1_SAI_MCLK_MASK		(0x7 << 19)
> +#define MCLK_DIR(x) (x == 1 ? IMX6UL_GPR1_SAI1_MCLK_DIR : x == 2 ? \
> +		     IMX6UL_GPR1_SAI2_MCLK_DIR : IMX6UL_GPR1_SAI3_MCLK_DIR)
>  
>  #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */
> diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
> index d8b673f..2147994 100644
> --- a/sound/soc/fsl/fsl_sai.c
> +++ b/sound/soc/fsl/fsl_sai.c
> @@ -21,6 +21,8 @@
>  #include <sound/core.h>
>  #include <sound/dmaengine_pcm.h>
>  #include <sound/pcm_params.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
>  
>  #include "fsl_sai.h"
>  #include "imx-pcm.h"
> @@ -786,10 +788,12 @@ static int fsl_sai_probe(struct platform_device *pdev)
>  {
>  	struct device_node *np = pdev->dev.of_node;
>  	struct fsl_sai *sai;
> +	struct regmap *gpr;
>  	struct resource *res;
>  	void __iomem *base;
>  	char tmp[8];
>  	int irq, ret, i;
> +	int index;
>  
>  	sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL);
>  	if (!sai)
> @@ -878,6 +882,22 @@ static int fsl_sai_probe(struct platform_device *pdev)
>  		fsl_sai_dai.symmetric_samplebits = 0;
>  	}
>  
> +	if (of_find_property(np, "fsl,sai-mclk-direction-output", NULL) &&
> +	    of_device_is_compatible(pdev->dev.of_node, "fsl,imx6ul-sai")) {
> +		gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr");
> +		if (IS_ERR(gpr)) {
> +			dev_err(&pdev->dev, "cannot find iomuxc registers\n");
> +			return PTR_ERR(gpr);
> +		}
> +
> +		index = of_alias_get_id(np, "sai");
> +		if (index < 0)
> +			return index;
> +
> +		regmap_update_bits(gpr, IOMUXC_GPR1, MCLK_DIR(index),
> +				   MCLK_DIR(index));
> +	}
> +
>  	sai->dma_params_rx.addr = res->start + FSL_SAI_RDR;
>  	sai->dma_params_tx.addr = res->start + FSL_SAI_TDR;
>  	sai->dma_params_rx.maxburst = FSL_SAI_MAXBURST_RX;
> -- 
> 1.9.1
> 

  reply	other threads:[~2016-05-04 23:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-04 22:33 [PATCH v3 1/2] ASoC: fsl_sai: Introduce a compatible string for MX6UL Fabio Estevam
2016-05-04 22:33 ` [PATCH v3 2/2] ASoC: fsl_sai: Allow setting the SAI MCLK direction Fabio Estevam
2016-05-04 23:11   ` Nicolin Chen [this message]
2016-05-05 15:56   ` Applied "ASoC: fsl_sai: Allow setting the SAI MCLK direction" to the asoc tree Mark Brown
2016-05-04 23:10 ` [PATCH v3 1/2] ASoC: fsl_sai: Introduce a compatible string for MX6UL Nicolin Chen
2016-05-05 15:56 ` Applied "ASoC: fsl_sai: Introduce a compatible string for MX6UL" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160504231148.GB17009@Asurada-Nvidia \
    --to=nicoleotsuka@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=brain@jikos.cz \
    --cc=broonie@kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=festevam@gmail.com \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox