Re: [PATCH 1/2] ASoC: sunxi: Add bindings for sun6i to SPDIF

[Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1464 bytes --]

On Sat, Jul 30, 2016 at 04:27:15PM +0200, codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
> From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its
> reset is controlled via a separate reset controller.
> 
> Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
> index 13503aa..4fe80f7 100644
> --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
> +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
> @@ -9,6 +9,7 @@ Required properties:
>  
>    - compatible		: should be one of the following:
>      - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
> +    - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
>  
>    - reg			: Offset and length of the register set for the device.
>  
> @@ -25,6 +26,8 @@ Required properties:
>  	"apb"		  clock for the spdif bus.
>  	"spdif"		  clock for spdif controller.
>  
> +  - reset		: reset specifier for the ahb reset (A31 and newer only)

Isn't it resets ? (plural)

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com