From mboxrd@z Thu Jan 1 00:00:00 1970 From: Danny Milosavljevic Subject: Re: Re: [PATCH v9 2/2] Add mixer controls: Line-In, FM-In, Mic 2, Capture Source, Differential Line-In. Date: Wed, 31 Aug 2016 09:40:44 +0200 Message-ID: <20160831094044.1c3227d6@scratchpost.org> References: <20160830054403.7878-1-dannym@scratchpost.org> <20160830054403.7878-3-dannym@scratchpost.org> Reply-To: dannym-bxPqe3T81XXwRsdMLXbzog@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org In-Reply-To: List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Chen-Yu Tsai Cc: Maxime Ripard , Mark Brown , linux-kernel , linux-arm-kernel , Linux-ALSA , Jaroslav Kysela , Takashi Iwai , Liam Girdwood , linux-sunxi List-Id: alsa-devel@alsa-project.org > And what about microphone bias? Would this be OK? static int sun4i_codec_handle_mic_bias_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { struct sun4i_codec *scodec = snd_soc_card_get_drvdata(w->dapm->card); if (SND_SOC_DAPM_EVENT_ON(event)) regmap_update_bits(scodec->regmap, SUN4I_CODEC_ADC_ACTL, BIT(SUN4I_CODEC_ADC_ACTL_VMICEN), BIT(SUN4I_CODEC_ADC_ACTL_VMICEN)); else regmap_update_bits(scodec->regmap, SUN4I_CODEC_ADC_ACTL, BIT(SUN4I_CODEC_ADC_ACTL_VMICEN), 0); } static const struct snd_soc_dapm_widget sun4i_codec_codec_dapm_widgets[] = { ... SND_SOC_DAPM_MIC("Mic1", sun4i_codec_handle_mic_bias_event), SND_SOC_DAPM_MIC("Mic2", sun4i_codec_handle_mic_bias_event), Do I then remove SND_SOC_DAPM_SUPPLY("VMIC", SUN4I_CODEC_ADC_ACTL, SUN4I_CODEC_ADC_ACTL_VMICEN, 0, NULL, 0), completely? What about the routes?