From: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Danny Milosavljevic <dannym-bxPqe3T81XXwRsdMLXbzog@public.gmane.org>
Cc: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
Jaroslav Kysela <perex-/Fr2/VpizcU@public.gmane.org>,
Takashi Iwai <tiwai-IBi9RG/b67k@public.gmane.org>,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH v2] ASoC: sun4i-codec: Distinguish sun4i from sun7i
Date: Mon, 12 Sep 2016 10:04:18 +0200 [thread overview]
Message-ID: <20160912080418.GE9449@lukather> (raw)
In-Reply-To: <20160908195759.18485-1-dannym-bxPqe3T81XXwRsdMLXbzog@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 5621 bytes --]
Hi,
On Thu, Sep 08, 2016 at 09:57:59PM +0200, Danny Milosavljevic wrote:
> Introduce mechanism to detect sun7i and provide a different regmap
> and different controls for it - different compared to sun4i Allwinner A10.
>
> The controls will be extended in a forthcoming patch - it is necessary to
> distinguish between sun4i and sun7i controls because the mic gains are in
> different registers.
>
> Renamed SUN4I_CODEC_AC_SYS_VERI to SUN7I_CODEC_AC_DAC_CAL and renamed
> SUN4I_CODEC_AC_MIC_PHONE_CAL to SUN7I_CODEC_AC_MIC_PHONE_CAL because these
> are actually not present on Allwinner A10.
>
> Handle quirks by regmap config and codec and select the correct quirks
> automatically.
You're doing several different things in that patch:
>
> Signed-off-by: Danny Milosavljevic <dannym-bxPqe3T81XXwRsdMLXbzog@public.gmane.org>
> ---
> sound/soc/sunxi/sun4i-codec.c | 78 ++++++++++++++++++++++++++++++++-----------
> 1 file changed, 58 insertions(+), 20 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
> index 0e19c50..239e330 100644
> --- a/sound/soc/sunxi/sun4i-codec.c
> +++ b/sound/soc/sunxi/sun4i-codec.c
> @@ -96,8 +96,8 @@
> /* Other various ADC registers */
> #define SUN4I_CODEC_DAC_TXCNT (0x30)
> #define SUN4I_CODEC_ADC_RXCNT (0x34)
> -#define SUN4I_CODEC_AC_SYS_VERI (0x38)
> -#define SUN4I_CODEC_AC_MIC_PHONE_CAL (0x3c)
> +#define SUN7I_CODEC_AC_DAC_CAL (0x38)
> +#define SUN7I_CODEC_AC_MIC_PHONE_CAL (0x3c)
1) Renaming some registers
> struct sun4i_codec {
> struct device *dev;
> @@ -509,7 +509,7 @@ static const struct snd_kcontrol_new sun4i_codec_pa_mute =
>
> static DECLARE_TLV_DB_SCALE(sun4i_codec_pa_volume_scale, -6300, 100, 1);
>
> -static const struct snd_kcontrol_new sun4i_codec_widgets[] = {
> +static const struct snd_kcontrol_new sun4i_codec_controls[] = {
2) Changing some structure name
> SOC_SINGLE_TLV("Power Amplifier Volume", SUN4I_CODEC_DAC_ACTL,
> SUN4I_CODEC_DAC_ACTL_PA_VOL, 0x3F, 0,
> sun4i_codec_pa_volume_scale),
> @@ -627,10 +627,60 @@ static const struct snd_soc_dapm_route sun4i_codec_codec_dapm_routes[] = {
> { "Mic1", NULL, "VMIC" },
> };
>
> +static const struct regmap_config sun4i_codec_regmap_config = {
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> + .max_register = SUN4I_CODEC_ADC_RXCNT,
> +};
> +
> +static const struct regmap_config sun7i_codec_regmap_config = {
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> + .max_register = SUN7I_CODEC_AC_MIC_PHONE_CAL,
> +};
3) Adding some custom regmap configs for the A10 and A20 variants
> +struct sun4i_quirks {
> + const struct snd_kcontrol_new *controls;
> + unsigned int num_controls;
4) Allow to have some custom controls (but you're not using that
anywhere yet).
> + const struct regmap_config *regmap_config;
> +};
> +
> +static const struct sun4i_quirks sun4i_quirks = {
> + .controls = NULL,
> + .num_controls = 0U,
> + .regmap_config = &sun4i_codec_regmap_config,
> +};
> +
> +static const struct sun4i_quirks sun7i_quirks = {
> + .controls = NULL,
> + .num_controls = 0U,
> + .regmap_config = &sun7i_codec_regmap_config,
> +};
> +
> +static const struct of_device_id sun4i_codec_of_match[] = {
> + { .compatible = "allwinner,sun4i-a10-codec", .data = &sun4i_quirks },
> + { .compatible = "allwinner,sun7i-a20-codec", .data = &sun7i_quirks },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, sun4i_codec_of_match);
This could be related to 3
> +
> +static int sun4i_codec_codec_probe(struct snd_soc_codec *scodec)
> +{
> + const struct sun4i_quirks *quirks;
> +
> + quirks = of_device_get_match_data(scodec->dev);
> + return snd_soc_add_codec_controls(scodec,
> + quirks->controls,
> + quirks->num_controls);
> +}
> +
> static struct snd_soc_codec_driver sun4i_codec_codec = {
> + .probe = sun4i_codec_codec_probe,
And this to 4.
> .component_driver = {
> - .controls = sun4i_codec_widgets,
> - .num_controls = ARRAY_SIZE(sun4i_codec_widgets),
> + .controls = sun4i_codec_controls,
> + .num_controls = ARRAY_SIZE(sun4i_codec_controls),
2)
> .dapm_widgets = sun4i_codec_codec_dapm_widgets,
> .num_dapm_widgets = ARRAY_SIZE(sun4i_codec_codec_dapm_widgets),
> .dapm_routes = sun4i_codec_codec_dapm_routes,
> @@ -678,20 +728,6 @@ static struct snd_soc_dai_driver dummy_cpu_dai = {
> },
> };
>
> -static const struct regmap_config sun4i_codec_regmap_config = {
> - .reg_bits = 32,
> - .reg_stride = 4,
> - .val_bits = 32,
> - .max_register = SUN4I_CODEC_AC_MIC_PHONE_CAL,
> -};
> -
> -static const struct of_device_id sun4i_codec_of_match[] = {
> - { .compatible = "allwinner,sun4i-a10-codec" },
> - { .compatible = "allwinner,sun7i-a20-codec" },
> - {}
> -};
> -MODULE_DEVICE_TABLE(of, sun4i_codec_of_match);
> -
> static struct snd_soc_dai_link *sun4i_codec_create_link(struct device *dev,
> int *num_links)
> {
> @@ -760,6 +796,7 @@ static int sun4i_codec_probe(struct platform_device *pdev)
> {
> struct snd_soc_card *card;
> struct sun4i_codec *scodec;
> + const struct sun4i_quirks *quirks;
> struct resource *res;
> void __iomem *base;
> int ret;
> @@ -777,8 +814,9 @@ static int sun4i_codec_probe(struct platform_device *pdev)
> return PTR_ERR(base);
> }
>
> + quirks = of_device_get_match_data(&pdev->dev);
> scodec->regmap = devm_regmap_init_mmio(&pdev->dev, base,
> - &sun4i_codec_regmap_config);
> + quirks->regmap_config);
3
This should be in separate patches.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
prev parent reply other threads:[~2016-09-12 8:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-08 19:57 [PATCH v2] ASoC: sun4i-codec: Distinguish sun4i from sun7i Danny Milosavljevic
2016-09-09 13:56 ` [linux-sunxi] " Chen-Yu Tsai
[not found] ` <20160908195759.18485-1-dannym-bxPqe3T81XXwRsdMLXbzog@public.gmane.org>
2016-09-12 8:04 ` Maxime Ripard [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160912080418.GE9449@lukather \
--to=maxime.ripard-wi1+55scjutkeb57/3fjtnbpr1lh4cv8@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=dannym-bxPqe3T81XXwRsdMLXbzog@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=perex-/Fr2/VpizcU@public.gmane.org \
--cc=tiwai-IBi9RG/b67k@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).