From: Vinod Koul <vinod.koul@intel.com>
To: Grace Kao <grace.kao@intel.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH] CHROMIUM: ASoC: Intel: boards: Use FS as nau8825 sysclk in nau88l25_max98357a machine
Date: Fri, 18 Nov 2016 10:58:46 +0530 [thread overview]
Message-ID: <20161118052846.GJ2698@localhost> (raw)
In-Reply-To: <1479364515-29019-1-git-send-email-grace.kao@intel.com>
On Thu, Nov 17, 2016 at 02:35:15PM +0800, Grace Kao wrote:
> 256FS sysclk gives the best audio quality per nau8825 datasheet.
>
> Loud headphone pop happens if there is no sysclk during nau8825
> playback power up sequence. Currently Skylake does not output MCLK/FS
> when the back-end DAI op hw_param is called, so we cannot switch to
> MCLK/FS in hw_param. This patch reduces pop by leting nau8825 keep
> using its internal VCO clock during widget power up sequence, until
> SNDRV_PCM_TRIGGER_START when MCLK/FS is available.
Please CC maintainers Mark and Liam on ASoC patches
The tag CHROMIUM is not fit for upstream please remove
>
> This is a temporary fix before Intel ADSP can output MCLK/FS early.
>
> BUG=chrome-os-partner:50471
> TEST=`emerge-sentry sys-kernel/chromeos-kernel-3_18`. Verified a local
> build that could reduce the pop sound.
This is just noise for upstream, please remove
>
> Change-Id: I4943fffa8eb1c874cc66b50f0897092bf48dd579
This as well
> Signed-off-by: Grace Kao <grace.kao@intel.com>
> Reviewed-on: https://chromium-review.googlesource.com/333180
And this
> Reviewed-by: Ben Zhang <benzh@chromium.org>
>
> Series-to: alsa-devel@alsa-project.org
> Series-cc: Vinod.koul@intel.com
here too
> ---
>
> diff --git a/sound/soc/intel/boards/skl_nau88l25_max98357a.c b/sound/soc/intel/boards/skl_nau88l25_max98357a.c
> index 0f89602..6ad8f52 100644
> --- a/sound/soc/intel/boards/skl_nau88l25_max98357a.c
> +++ b/sound/soc/intel/boards/skl_nau88l25_max98357a.c
> @@ -70,14 +70,7 @@
> return -EIO;
> }
>
> - if (SND_SOC_DAPM_EVENT_ON(event)) {
> - ret = snd_soc_dai_set_sysclk(codec_dai,
> - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN);
> - if (ret < 0) {
> - dev_err(card->dev, "set sysclk err = %d\n", ret);
> - return -EIO;
> - }
> - } else {
> + if (!SND_SOC_DAPM_EVENT_ON(event)) {
SND_SOC_DAPM_EVENT_OFF ??
> +static int skylake_nau8825_trigger(struct snd_pcm_substream *substream, int cmd)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_pcm_runtime *runtime = substream->runtime;
> + struct snd_soc_dai *codec_dai = rtd->codec_dai;
> + int ret = 0;
> +
> + switch (cmd) {
> + case SNDRV_PCM_TRIGGER_START:
> + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0,
> + SND_SOC_CLOCK_IN);
> + if (ret < 0)
> + dev_err(codec_dai->dev, "can't set FS clock %d\n", ret);
> + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate,
> + runtime->rate * 256);
> + if (ret < 0)
> + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret);
> + break;
starting clock on trigger doesnt sound right to me..
--
~Vinod
next prev parent reply other threads:[~2016-11-18 5:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-17 6:35 [PATCH] CHROMIUM: ASoC: Intel: boards: Use FS as nau8825 sysclk in nau88l25_max98357a machine Grace Kao
2016-11-18 5:28 ` Vinod Koul [this message]
2016-11-18 9:48 ` Charles Keepax
2016-11-18 10:25 ` Vinod Koul
-- strict thread matches above, loose matches on Subject: below --
2016-11-18 5:16 Grace Kao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161118052846.GJ2698@localhost \
--to=vinod.koul@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=grace.kao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).