From: Jerome Anand <jerome.anand@intel.com>
To: intel-gfx@lists.freedesktop.org, alsa-devel@alsa-project.org
Cc: tiwai@suse.de, broonie@kernel.org, rakesh.a.ughreja@intel.com
Subject: [RFC PATCH v4 2/7] drm/i915: Add support for audio driver notifications
Date: Sat, 3 Dec 2016 01:34:30 +0530 [thread overview]
Message-ID: <20161202200430.28213-1-jerome.anand@intel.com> (raw)
Notifiations like mode change, hot plug and edid to
the audio driver are added. This is inturn used by the
audio driver for its functionality.
A new interface file capturing the notifications needed by the
audio driver is added
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jerome Anand <jerome.anand@intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 3 +++
drivers/gpu/drm/i915/intel_audio.c | 8 ++++++
drivers/gpu/drm/i915/intel_hdmi.c | 1 +
drivers/gpu/drm/i915/intel_lpe_audio.c | 46 ++++++++++++++++++++++++++++++++++
include/drm/intel_lpe_audio.h | 1 +
5 files changed, 59 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 2a79048..33bc44c 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3561,6 +3561,9 @@ int intel_lpe_audio_setup(struct drm_i915_private *dev_priv);
void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv);
void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv);
bool intel_lpe_audio_detect(struct drm_i915_private *dev_priv);
+void intel_lpe_audio_notify(struct drm_i915_private *dev_priv,
+ void *eld, int port, int tmds_clk_speed,
+ bool connected);
/* intel_i2c.c */
extern int intel_setup_gmbus(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index 1c509f7..55a6831 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -24,6 +24,7 @@
#include <linux/kernel.h>
#include <linux/component.h>
#include <drm/i915_component.h>
+#include <drm/intel_lpe_audio.h>
#include "intel_drv.h"
#include <drm/drmP.h>
@@ -627,6 +628,10 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder,
if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify)
acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr,
(int) port, (int) pipe);
+
+ if (HAS_LPE_AUDIO(dev_priv))
+ intel_lpe_audio_notify(dev_priv, connector->eld, port,
+ crtc_state->port_clock, true);
}
/**
@@ -660,6 +665,9 @@ void intel_audio_codec_disable(struct intel_encoder *intel_encoder)
if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify)
acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr,
(int) port, (int) pipe);
+
+ if (HAS_LPE_AUDIO(dev_priv))
+ intel_lpe_audio_notify(dev_priv, NULL, port, 0, true);
}
/**
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index fb88e32..02d50e3 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -36,6 +36,7 @@
#include <drm/drm_edid.h>
#include "intel_drv.h"
#include <drm/i915_drm.h>
+#include <drm/intel_lpe_audio.h>
#include "i915_drv.h"
static struct drm_device *intel_hdmi_to_dev(struct intel_hdmi *intel_hdmi)
diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c
index e12e5f7..a141a9c 100644
--- a/drivers/gpu/drm/i915/intel_lpe_audio.c
+++ b/drivers/gpu/drm/i915/intel_lpe_audio.c
@@ -361,3 +361,49 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv)
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
+
+
+/**
+ * intel_lpe_audio_notify() - notify lpe audio event
+ * audio driver and i915
+ * @dev_priv: the i915 drm device private data
+ * @eld : ELD data
+ * @port: port id
+ * @tmds_clk_speed: tmds clock frequency in Hz
+ * @connected: hdmi connected/disconnected
+ *
+ * Notify lpe audio driver of eld change.
+ */
+void intel_lpe_audio_notify(struct drm_i915_private *dev_priv,
+ void *eld, int port, int tmds_clk_speed,
+ bool connected)
+{
+ unsigned long irq_flags;
+
+ if (HAS_LPE_AUDIO(dev_priv)) {
+ struct intel_hdmi_lpe_audio_pdata *pdata = dev_get_platdata(
+ &(dev_priv->lpe_audio.platdev->dev));
+
+ spin_lock_irqsave(&pdata->lpe_audio_slock,
+ irq_flags);
+
+ if (eld != NULL) {
+ memcpy(pdata->eld.eld_data, eld,
+ HDMI_MAX_ELD_BYTES);
+ pdata->eld.port_id = port;
+
+ if (tmds_clk_speed)
+ pdata->tmds_clock_speed =
+ tmds_clk_speed;
+ }
+ pdata->hdmi_connected = connected;
+ if (pdata->notify_audio_lpe)
+ pdata->notify_audio_lpe(
+ (eld != NULL) ? &pdata->eld : NULL);
+ else
+ pdata->notify_pending = true;
+
+ spin_unlock_irqrestore(&pdata->lpe_audio_slock,
+ irq_flags);
+ }
+}
diff --git a/include/drm/intel_lpe_audio.h b/include/drm/intel_lpe_audio.h
index a64c449..952de05 100644
--- a/include/drm/intel_lpe_audio.h
+++ b/include/drm/intel_lpe_audio.h
@@ -25,6 +25,7 @@
#define _INTEL_LPE_AUDIO_H_
#include <linux/types.h>
+#include <linux/spinlock_types.h>
#define HDMI_MAX_ELD_BYTES 128
--
2.9.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
reply other threads:[~2016-12-02 20:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161202200430.28213-1-jerome.anand@intel.com \
--to=jerome.anand@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rakesh.a.ughreja@intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).