* [PATCH V3 3/5] ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T
2017-01-10 5:08 [PATCH V3 0/5] Add support for Legacy HDMI audio drivers Jerome Anand
2017-01-10 5:08 ` [PATCH V3 1/5] drm/i915: setup bridge for HDMI LPE audio driver Jerome Anand
2017-01-10 5:08 ` [PATCH V3 2/5] drm/i915: Add support for audio driver notifications Jerome Anand
@ 2017-01-10 5:08 ` Jerome Anand
2017-01-18 11:46 ` Takashi Iwai
2017-01-10 5:08 ` [PATCH V3 4/5] ALSA: x86: hdmi: Add audio support for BYT and CHT Jerome Anand
2017-01-10 5:08 ` [PATCH V3 5/5] ALSA: x86: hdmi: continue playback even when display resolution changes Jerome Anand
4 siblings, 1 reply; 14+ messages in thread
From: Jerome Anand @ 2017-01-10 5:08 UTC (permalink / raw)
To: intel-gfx, alsa-devel; +Cc: tiwai, broonie, rakesh.a.ughreja
On Baytrail and Cherrytrail, HDaudio may be fused out or disabled
by the BIOS. This driver enables an alternate path to the i915
display registers and DMA.
Although there is no hardware path between i915 display and LPE/SST
audio clusters, this HDMI capability is referred to in the documentation
as "HDMI LPE Audio" so we keep the name for consistency. There is no
hardware path or control dependencies with the LPE/SST DSP functionality.
The hdmi-lpe-audio driver will be probed when the i915 driver creates
a child platform device.
Since this driver is neither SoC nor PCI, a new x86 folder is added
Additional indirections in the code will be cleaned up in the next series
to aid smoother DP integration
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jerome Anand <jerome.anand@intel.com>
---
sound/Kconfig | 2 +
sound/Makefile | 2 +-
sound/x86/Kconfig | 16 +
sound/x86/Makefile | 6 +
sound/x86/intel_hdmi_lpe_audio.c | 614 +++++++++++++++++++++++++++++++++++
sound/x86/intel_hdmi_lpe_audio.h | 685 +++++++++++++++++++++++++++++++++++++++
6 files changed, 1324 insertions(+), 1 deletion(-)
create mode 100644 sound/x86/Kconfig
create mode 100644 sound/x86/Makefile
create mode 100644 sound/x86/intel_hdmi_lpe_audio.c
create mode 100644 sound/x86/intel_hdmi_lpe_audio.h
diff --git a/sound/Kconfig b/sound/Kconfig
index 5a240e0..ee2e69a 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -108,6 +108,8 @@ source "sound/parisc/Kconfig"
source "sound/soc/Kconfig"
+source "sound/x86/Kconfig"
+
endif # SND
menuconfig SOUND_PRIME
diff --git a/sound/Makefile b/sound/Makefile
index c41bdf5..6de45d2 100644
--- a/sound/Makefile
+++ b/sound/Makefile
@@ -5,7 +5,7 @@ obj-$(CONFIG_SOUND) += soundcore.o
obj-$(CONFIG_SOUND_PRIME) += oss/
obj-$(CONFIG_DMASOUND) += oss/
obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
- firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/
+ firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ x86/
obj-$(CONFIG_SND_AOA) += aoa/
# This one must be compilable even if sound is configured out
diff --git a/sound/x86/Kconfig b/sound/x86/Kconfig
new file mode 100644
index 0000000..e9297d0
--- /dev/null
+++ b/sound/x86/Kconfig
@@ -0,0 +1,16 @@
+menuconfig SND_X86
+ tristate "X86 sound devices"
+ ---help---
+
+ X86 sound devices that don't fall under SoC or PCI categories
+
+if SND_X86
+
+config HDMI_LPE_AUDIO
+ tristate "HDMI audio without HDaudio on Intel Atom platforms"
+ depends on DRM_I915
+ default n
+ help
+ Choose this option to support HDMI LPE Audio mode
+
+endif # SND_X86
diff --git a/sound/x86/Makefile b/sound/x86/Makefile
new file mode 100644
index 0000000..54d002d
--- /dev/null
+++ b/sound/x86/Makefile
@@ -0,0 +1,6 @@
+ccflags-y += -Iinclude/drm
+
+snd-hdmi-lpe-audio-objs += \
+ intel_hdmi_lpe_audio.o
+
+obj-$(CONFIG_HDMI_LPE_AUDIO) += snd-hdmi-lpe-audio.o
diff --git a/sound/x86/intel_hdmi_lpe_audio.c b/sound/x86/intel_hdmi_lpe_audio.c
new file mode 100644
index 0000000..c2ebce1
--- /dev/null
+++ b/sound/x86/intel_hdmi_lpe_audio.c
@@ -0,0 +1,614 @@
+/*
+ * intel_hdmi_lpe_audio.c - Intel HDMI LPE audio driver for Atom platforms
+ *
+ * Copyright (C) 2016 Intel Corp
+ * Authors:
+ * Jerome Anand <jerome.anand@intel.com>
+ * Aravind Siddappaji <aravindx.siddappaji@intel.com>
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irqreturn.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <sound/pcm.h>
+#include <sound/core.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/control.h>
+#include <sound/initval.h>
+#include <drm/intel_lpe_audio.h>
+#include "intel_hdmi_lpe_audio.h"
+
+/* globals*/
+struct platform_device *hlpe_pdev;
+int hlpe_state;
+union otm_hdmi_eld_t hlpe_eld;
+
+struct hdmi_lpe_audio_ctx {
+ int irq;
+ void __iomem *mmio_start;
+ had_event_call_back had_event_callbacks;
+ struct snd_intel_had_interface *had_interface;
+ void *had_pvt_data;
+ int tmds_clock_speed;
+ unsigned int had_config_offset;
+ int hdmi_audio_interrupt_mask;
+ struct work_struct hdmi_audio_wq;
+};
+
+static inline void hdmi_set_eld(void *eld)
+{
+ int size;
+
+ BUILD_BUG_ON(sizeof(hlpe_eld) > HDMI_MAX_ELD_BYTES);
+
+ size = sizeof(hlpe_eld);
+ memcpy((void *)&hlpe_eld, eld, size);
+}
+
+static inline int hdmi_get_eld(void *eld)
+{
+ uint8_t *eld_data = (uint8_t *)&hlpe_eld;
+
+ memcpy(eld, (void *)&hlpe_eld, sizeof(hlpe_eld));
+
+ print_hex_dump_bytes("eld: ", DUMP_PREFIX_NONE, eld_data,
+ sizeof(hlpe_eld));
+ return 0;
+}
+
+
+static inline struct hdmi_lpe_audio_ctx *get_hdmi_context(void)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+
+ ctx = platform_get_drvdata(hlpe_pdev);
+ return ctx;
+}
+
+/*
+ * return whether HDMI audio device is busy.
+ */
+bool mid_hdmi_audio_is_busy(void *ddev)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+ int hdmi_audio_busy = 0;
+ struct hdmi_audio_event hdmi_audio_event;
+
+ dev_dbg(&hlpe_pdev->dev, "%s: Enter", __func__);
+
+ ctx = platform_get_drvdata(hlpe_pdev);
+
+ if (hlpe_state == hdmi_connector_status_disconnected) {
+ /* HDMI is not connected, assuming audio device is idle. */
+ return false;
+ }
+
+ if (ctx->had_interface) {
+ hdmi_audio_event.type = HAD_EVENT_QUERY_IS_AUDIO_BUSY;
+ hdmi_audio_busy = ctx->had_interface->query(
+ ctx->had_pvt_data,
+ hdmi_audio_event);
+ return hdmi_audio_busy != 0;
+ }
+ return false;
+}
+
+/*
+ * return whether HDMI audio device is suspended.
+ */
+bool mid_hdmi_audio_suspend(void *ddev)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+ struct hdmi_audio_event hdmi_audio_event;
+ int ret = 0;
+
+ ctx = platform_get_drvdata(hlpe_pdev);
+
+ if (hlpe_state == hdmi_connector_status_disconnected) {
+ /* HDMI is not connected, assuming audio device
+ * is suspended already.
+ */
+ return true;
+ }
+
+ dev_dbg(&hlpe_pdev->dev, "%s: hlpe_state %d", __func__,
+ hlpe_state);
+
+ if (ctx->had_interface) {
+ hdmi_audio_event.type = 0;
+ ret = ctx->had_interface->suspend(ctx->had_pvt_data,
+ hdmi_audio_event);
+ return (ret == 0) ? true : false;
+ }
+ return true;
+}
+
+void mid_hdmi_audio_resume(void *ddev)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+
+ ctx = platform_get_drvdata(hlpe_pdev);
+
+ if (hlpe_state == hdmi_connector_status_disconnected) {
+ /* HDMI is not connected, there is no need
+ * to resume audio device.
+ */
+ return;
+ }
+
+ dev_dbg(&hlpe_pdev->dev, "%s: hlpe_state %d", __func__, hlpe_state);
+
+ if (ctx->had_interface)
+ ctx->had_interface->resume(ctx->had_pvt_data);
+}
+
+void mid_hdmi_audio_signal_event(enum had_event_type event)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+
+ dev_dbg(&hlpe_pdev->dev, "%s: Enter\n", __func__);
+
+ ctx = platform_get_drvdata(hlpe_pdev);
+
+ if (ctx->had_event_callbacks)
+ (*ctx->had_event_callbacks)(event,
+ ctx->had_pvt_data);
+}
+
+/**
+ * hdmi_audio_write:
+ * used to write into display controller HDMI audio registers.
+ *
+ */
+static int hdmi_audio_write(uint32_t reg, uint32_t val)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+
+ ctx = platform_get_drvdata(hlpe_pdev);
+
+ dev_dbg(&hlpe_pdev->dev, "%s: reg[0x%x] = 0x%x\n", __func__, reg, val);
+
+ iowrite32(val, (ctx->mmio_start+reg));
+
+ return 0;
+}
+
+/**
+ * hdmi_audio_read:
+ * used to get the register value read from
+ * display controller HDMI audio registers.
+ */
+static int hdmi_audio_read(uint32_t reg, uint32_t *val)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+
+ ctx = platform_get_drvdata(hlpe_pdev);
+ *val = ioread32(ctx->mmio_start+reg);
+ dev_dbg(&hlpe_pdev->dev, "%s: reg[0x%x] = 0x%x\n", __func__, reg, *val);
+ return 0;
+}
+
+/**
+ * hdmi_audio_rmw:
+ * used to update the masked bits in display controller HDMI
+ * audio registers.
+ */
+static int hdmi_audio_rmw(uint32_t reg, uint32_t val, uint32_t mask)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+ uint32_t val_tmp = 0;
+
+ ctx = platform_get_drvdata(hlpe_pdev);
+
+ val_tmp = (val & mask) |
+ ((ioread32(ctx->mmio_start + reg)) & ~mask);
+
+ iowrite32(val_tmp, (ctx->mmio_start+reg));
+ dev_dbg(&hlpe_pdev->dev, "%s: reg[0x%x] = 0x%x\n", __func__, reg, val_tmp);
+
+ return 0;
+}
+
+/**
+ * hdmi_audio_get_caps:
+ * used to return the HDMI audio capabilities.
+ * e.g. resolution, frame rate.
+ */
+static int hdmi_audio_get_caps(enum had_caps_list get_element,
+ void *capabilities)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+ int ret = 0;
+
+ ctx = get_hdmi_context();
+
+ dev_dbg(&hlpe_pdev->dev, "%s: Enter\n", __func__);
+
+ switch (get_element) {
+ case HAD_GET_ELD:
+ ret = hdmi_get_eld(capabilities);
+ break;
+ case HAD_GET_DISPLAY_RATE:
+ /* ToDo: Verify if sampling freq logic is correct */
+ memcpy(capabilities, &(ctx->tmds_clock_speed),
+ sizeof(uint32_t));
+ dev_dbg(&hlpe_pdev->dev, "%s: tmds_clock_speed = 0x%x\n", __func__,
+ ctx->tmds_clock_speed);
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * hdmi_audio_get_register_base
+ * used to get the current hdmi base address
+ */
+int hdmi_audio_get_register_base(uint32_t **reg_base,
+ uint32_t *config_offset)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+
+ ctx = platform_get_drvdata(hlpe_pdev);
+ *reg_base = (uint32_t *)(ctx->mmio_start);
+ *config_offset = ctx->had_config_offset;
+ dev_dbg(&hlpe_pdev->dev, "%s: reg_base = 0x%p, cfg_off = 0x%x\n", __func__,
+ *reg_base, *config_offset);
+ return 0;
+}
+
+/**
+ * hdmi_audio_set_caps:
+ * used to set the HDMI audio capabilities.
+ * e.g. Audio INT.
+ */
+int hdmi_audio_set_caps(enum had_caps_list set_element,
+ void *capabilties)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+
+ ctx = platform_get_drvdata(hlpe_pdev);
+
+ dev_dbg(&hlpe_pdev->dev, "%s: cap_id = 0x%x\n", __func__, set_element);
+
+ switch (set_element) {
+ case HAD_SET_ENABLE_AUDIO_INT:
+ {
+ uint32_t status_reg;
+
+ hdmi_audio_read(AUD_HDMI_STATUS_v2 +
+ ctx->had_config_offset, &status_reg);
+ status_reg |=
+ HDMI_AUDIO_BUFFER_DONE | HDMI_AUDIO_UNDERRUN;
+ hdmi_audio_write(AUD_HDMI_STATUS_v2 +
+ ctx->had_config_offset, status_reg);
+ hdmi_audio_read(AUD_HDMI_STATUS_v2 +
+ ctx->had_config_offset, &status_reg);
+
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static struct hdmi_audio_registers_ops hdmi_audio_reg_ops = {
+ .hdmi_audio_get_register_base = hdmi_audio_get_register_base,
+ .hdmi_audio_read_register = hdmi_audio_read,
+ .hdmi_audio_write_register = hdmi_audio_write,
+ .hdmi_audio_read_modify = hdmi_audio_rmw,
+};
+
+static struct hdmi_audio_query_set_ops hdmi_audio_get_set_ops = {
+ .hdmi_audio_get_caps = hdmi_audio_get_caps,
+ .hdmi_audio_set_caps = hdmi_audio_set_caps,
+};
+
+int mid_hdmi_audio_setup(
+ had_event_call_back audio_callbacks,
+ struct hdmi_audio_registers_ops *reg_ops,
+ struct hdmi_audio_query_set_ops *query_ops)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+
+ ctx = platform_get_drvdata(hlpe_pdev);
+
+ dev_dbg(&hlpe_pdev->dev, "%s: called\n", __func__);
+
+ reg_ops->hdmi_audio_get_register_base =
+ (hdmi_audio_reg_ops.hdmi_audio_get_register_base);
+ reg_ops->hdmi_audio_read_register =
+ (hdmi_audio_reg_ops.hdmi_audio_read_register);
+ reg_ops->hdmi_audio_write_register =
+ (hdmi_audio_reg_ops.hdmi_audio_write_register);
+ reg_ops->hdmi_audio_read_modify =
+ (hdmi_audio_reg_ops.hdmi_audio_read_modify);
+ query_ops->hdmi_audio_get_caps =
+ hdmi_audio_get_set_ops.hdmi_audio_get_caps;
+ query_ops->hdmi_audio_set_caps =
+ hdmi_audio_get_set_ops.hdmi_audio_set_caps;
+
+ ctx->had_event_callbacks = audio_callbacks;
+
+ return 0;
+}
+
+void _had_wq(struct work_struct *work)
+{
+ mid_hdmi_audio_signal_event(HAD_EVENT_HOT_PLUG);
+}
+
+int mid_hdmi_audio_register(struct snd_intel_had_interface *driver,
+ void *had_data)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+
+ ctx = platform_get_drvdata(hlpe_pdev);
+
+ dev_dbg(&hlpe_pdev->dev, "%s: called\n", __func__);
+
+ ctx->had_pvt_data = had_data;
+ ctx->had_interface = driver;
+
+ /* The Audio driver is loading now and we need to notify
+ * it if there is an HDMI device attached
+ */
+ INIT_WORK(&ctx->hdmi_audio_wq, _had_wq);
+ dev_dbg(&hlpe_pdev->dev, "%s: Scheduling HDMI audio work queue\n", __func__);
+ schedule_work(&ctx->hdmi_audio_wq);
+
+ return 0;
+}
+
+static irqreturn_t display_pipe_interrupt_handler(int irq, void *dev_id)
+{
+ u32 audio_stat, audio_reg;
+
+ struct hdmi_lpe_audio_ctx *ctx;
+
+ dev_dbg(&hlpe_pdev->dev, "%s: Enter\n", __func__);
+
+ ctx = platform_get_drvdata(hlpe_pdev);
+
+ audio_reg = ctx->had_config_offset + AUD_HDMI_STATUS_v2;
+ hdmi_audio_read(audio_reg, &audio_stat);
+
+ if (audio_stat & HDMI_AUDIO_UNDERRUN) {
+ hdmi_audio_write(audio_reg, HDMI_AUDIO_UNDERRUN);
+ mid_hdmi_audio_signal_event(
+ HAD_EVENT_AUDIO_BUFFER_UNDERRUN);
+ }
+
+ if (audio_stat & HDMI_AUDIO_BUFFER_DONE) {
+ hdmi_audio_write(audio_reg, HDMI_AUDIO_BUFFER_DONE);
+ mid_hdmi_audio_signal_event(
+ HAD_EVENT_AUDIO_BUFFER_DONE);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void notify_audio_lpe(void *audio_ptr)
+{
+ struct hdmi_lpe_audio_ctx *ctx = get_hdmi_context();
+ struct intel_hdmi_lpe_audio_pdata *pdata = hlpe_pdev->dev.platform_data;
+ struct intel_hdmi_lpe_audio_eld *eld = audio_ptr;
+
+ if (pdata->hdmi_connected != true) {
+
+ dev_dbg(&hlpe_pdev->dev, "%s: Event: HAD_NOTIFY_HOT_UNPLUG\n",
+ __func__);
+
+ if (hlpe_state == hdmi_connector_status_connected) {
+
+ hlpe_state =
+ hdmi_connector_status_disconnected;
+
+ mid_hdmi_audio_signal_event(
+ HAD_EVENT_HOT_UNPLUG);
+ } else
+ dev_dbg(&hlpe_pdev->dev, "%s: Already Unplugged!\n", __func__);
+
+ } else if (eld != NULL) {
+
+ hdmi_set_eld(eld->eld_data);
+
+ mid_hdmi_audio_signal_event(HAD_EVENT_HOT_PLUG);
+
+ hlpe_state = hdmi_connector_status_connected;
+
+ dev_dbg(&hlpe_pdev->dev, "%s: HAD_NOTIFY_ELD : port = %d, tmds = %d\n",
+ __func__, eld->port_id,
+ pdata->tmds_clock_speed);
+
+ if (pdata->tmds_clock_speed) {
+ ctx->tmds_clock_speed = pdata->tmds_clock_speed;
+ mid_hdmi_audio_signal_event(HAD_EVENT_MODE_CHANGING);
+ }
+ } else
+ dev_dbg(&hlpe_pdev->dev, "%s: Event: NULL EDID!!\n", __func__);
+}
+
+/**
+ * hdmi_lpe_audio_probe - start bridge with i915
+ *
+ * This function is called when the i915 driver creates the hdmi-lpe-audio
+ * platform device. Card creation is deferred until a hot plug event is
+ * received
+ */
+static int hdmi_lpe_audio_probe(struct platform_device *pdev)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+ struct intel_hdmi_lpe_audio_pdata *pdata;
+ int irq;
+ struct resource *res_mmio;
+ void __iomem *mmio_start;
+ int ret = 0;
+ unsigned long flag_irq;
+ static const struct pci_device_id cherryview_ids[] = {
+ {PCI_DEVICE(0x8086, 0x22b0)},
+ {PCI_DEVICE(0x8086, 0x22b1)},
+ {PCI_DEVICE(0x8086, 0x22b2)},
+ {PCI_DEVICE(0x8086, 0x22b3)},
+ {}
+ };
+
+ dev_dbg(&hlpe_pdev->dev, "Enter %s\n", __func__);
+
+ /*TBD:remove globals*/
+ hlpe_pdev = pdev;
+ hlpe_state = hdmi_connector_status_disconnected;
+
+ /* get resources */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&hlpe_pdev->dev, "Could not get irq resource\n");
+ return -ENODEV;
+ }
+
+ res_mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res_mmio) {
+ dev_err(&hlpe_pdev->dev, "Could not get IO_MEM resources\n");
+ return -ENXIO;
+ }
+
+ dev_dbg(&hlpe_pdev->dev, "%s: mmio_start = 0x%x, mmio_end = 0x%x\n", __func__,
+ (unsigned int)res_mmio->start, (unsigned int)res_mmio->end);
+
+ mmio_start = ioremap_nocache(res_mmio->start,
+ (size_t)((res_mmio->end - res_mmio->start)
+ + 1));
+ if (!mmio_start) {
+ dev_err(&hlpe_pdev->dev, "Could not get ioremap\n");
+ return -EACCES;
+ }
+
+ /* setup interrupt handler */
+ ret = request_irq(irq, display_pipe_interrupt_handler,
+ 0,
+ pdev->name,
+ NULL);
+ if (ret < 0) {
+ dev_err(&hlpe_pdev->dev, "request_irq failed\n");
+ iounmap(mmio_start);
+ return -ENODEV;
+ }
+
+ /* alloc and save context */
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (ctx == NULL) {
+ free_irq(irq, NULL);
+ iounmap(mmio_start);
+ return -ENOMEM;
+ }
+
+ ctx->irq = irq;
+ dev_dbg(&hlpe_pdev->dev, "hdmi lpe audio: irq num = %d\n", irq);
+ ctx->mmio_start = mmio_start;
+ ctx->tmds_clock_speed = DIS_SAMPLE_RATE_148_5;
+
+ if (pci_dev_present(cherryview_ids)) {
+ dev_dbg(&hlpe_pdev->dev, "%s: Cherrytrail LPE - Detected\n", __func__);
+ ctx->had_config_offset = AUDIO_HDMI_CONFIG_C;
+ } else {
+ dev_dbg(&hlpe_pdev->dev, "%s: Baytrail LPE - Assume\n", __func__);
+ ctx->had_config_offset = AUDIO_HDMI_CONFIG_A;
+ }
+
+ pdata = pdev->dev.platform_data;
+
+ if (pdata == NULL) {
+ dev_err(&hlpe_pdev->dev, "%s: quit: pdata not allocated by i915!!\n", __func__);
+ kfree(ctx);
+ free_irq(irq, NULL);
+ iounmap(mmio_start);
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, ctx);
+
+ dev_dbg(&hlpe_pdev->dev, "hdmi lpe audio: setting pin eld notify callback\n");
+
+ spin_lock_irqsave(&pdata->lpe_audio_slock, flag_irq);
+ pdata->notify_audio_lpe = notify_audio_lpe;
+
+ if (pdata->notify_pending) {
+
+ dev_dbg(&hlpe_pdev->dev, "%s: handle pending notification\n", __func__);
+ notify_audio_lpe(&pdata->eld);
+ pdata->notify_pending = false;
+ }
+ spin_unlock_irqrestore(&pdata->lpe_audio_slock, flag_irq);
+
+ return ret;
+}
+
+/**
+ * hdmi_lpe_audio_remove - stop bridge with i915
+ *
+ * This function is called when the platform device is destroyed. The sound
+ * card should have been removed on hot plug event.
+ */
+static int hdmi_lpe_audio_remove(struct platform_device *pdev)
+{
+ struct hdmi_lpe_audio_ctx *ctx;
+
+ dev_dbg(&hlpe_pdev->dev, "Enter %s\n", __func__);
+
+ /* get context, release resources */
+ ctx = platform_get_drvdata(pdev);
+ iounmap(ctx->mmio_start);
+ free_irq(ctx->irq, NULL);
+ kfree(ctx);
+ return 0;
+}
+
+static int hdmi_lpe_audio_suspend(struct platform_device *pt_dev,
+ pm_message_t state)
+{
+ dev_dbg(&hlpe_pdev->dev, "Enter %s\n", __func__);
+ mid_hdmi_audio_suspend(NULL);
+ return 0;
+}
+
+static int hdmi_lpe_audio_resume(struct platform_device *pt_dev)
+{
+ dev_dbg(&hlpe_pdev->dev, "Enter %s\n", __func__);
+ mid_hdmi_audio_resume(NULL);
+ return 0;
+}
+
+static struct platform_driver hdmi_lpe_audio_driver = {
+ .driver = {
+ .name = "hdmi-lpe-audio",
+ },
+ .probe = hdmi_lpe_audio_probe,
+ .remove = hdmi_lpe_audio_remove,
+ .suspend = hdmi_lpe_audio_suspend,
+ .resume = hdmi_lpe_audio_resume
+};
+
+module_platform_driver(hdmi_lpe_audio_driver);
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:hdmi_lpe_audio");
diff --git a/sound/x86/intel_hdmi_lpe_audio.h b/sound/x86/intel_hdmi_lpe_audio.h
new file mode 100644
index 0000000..8d92931
--- /dev/null
+++ b/sound/x86/intel_hdmi_lpe_audio.h
@@ -0,0 +1,685 @@
+/*
+ * intel_hdmi_lpe_audio.h - Intel HDMI LPE audio driver
+ *
+ * Copyright (C) 2016 Intel Corp
+ * Authors: Sailaja Bandarupalli <sailaja.bandarupalli@intel.com>
+ * Ramesh Babu K V <ramesh.babu@intel.com>
+ * Vaibhav Agarwal <vaibhav.agarwal@intel.com>
+ * Jerome Anand <jerome.anand@intel.com>
+ * Aravind Siddappaji <aravindx.siddappaji@intel.com>
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#ifndef __INTEL_HDMI_LPE_AUDIO_H
+#define __INTEL_HDMI_LPE_AUDIO_H
+
+#include <linux/types.h>
+#include <sound/initval.h>
+#include <linux/version.h>
+#include <linux/pm_runtime.h>
+#include <sound/asoundef.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+
+#define HMDI_LPE_AUDIO_DRIVER_NAME "intel-hdmi-lpe-audio"
+#define HAD_MAX_DEVICES 1
+#define HAD_MIN_CHANNEL 2
+#define HAD_MAX_CHANNEL 8
+#define HAD_NUM_OF_RING_BUFS 4
+
+/* Assume 192KHz, 8channel, 25msec period */
+#define HAD_MAX_BUFFER (600*1024)
+#define HAD_MIN_BUFFER (32*1024)
+#define HAD_MAX_PERIODS 4
+#define HAD_MIN_PERIODS 4
+#define HAD_MAX_PERIOD_BYTES (HAD_MAX_BUFFER/HAD_MIN_PERIODS)
+#define HAD_MIN_PERIOD_BYTES 256
+#define HAD_FIFO_SIZE 0 /* fifo not being used */
+#define MAX_SPEAKERS 8
+/* TODO: Add own tlv when channel map is ported for user space */
+#define USE_ALSA_DEFAULT_TLV
+
+#define AUD_SAMPLE_RATE_32 32000
+#define AUD_SAMPLE_RATE_44_1 44100
+#define AUD_SAMPLE_RATE_48 48000
+#define AUD_SAMPLE_RATE_88_2 88200
+#define AUD_SAMPLE_RATE_96 96000
+#define AUD_SAMPLE_RATE_176_4 176400
+#define AUD_SAMPLE_RATE_192 192000
+
+#define HAD_MIN_RATE AUD_SAMPLE_RATE_32
+#define HAD_MAX_RATE AUD_SAMPLE_RATE_192
+
+#define DIS_SAMPLE_RATE_25_2 25200
+#define DIS_SAMPLE_RATE_27 27000
+#define DIS_SAMPLE_RATE_54 54000
+#define DIS_SAMPLE_RATE_74_25 74250
+#define DIS_SAMPLE_RATE_148_5 148500
+#define HAD_REG_WIDTH 0x08
+#define HAD_MAX_HW_BUFS 0x04
+#define HAD_MAX_DIP_WORDS 16
+#define INTEL_HAD "IntelHdmiLpeAudio"
+
+/* _AUD_CONFIG register MASK */
+#define AUD_CONFIG_MASK_UNDERRUN 0xC0000000
+#define AUD_CONFIG_MASK_SRDBG 0x00000002
+#define AUD_CONFIG_MASK_FUNCRST 0x00000001
+
+#define MAX_CNT 0xFF
+#define HAD_SUSPEND_DELAY 1000
+
+#define OTM_HDMI_ELD_SIZE 128
+
+union otm_hdmi_eld_t {
+ unsigned char eld_data[OTM_HDMI_ELD_SIZE];
+ struct {
+ /* Byte[0] = ELD Version Number */
+ union {
+ unsigned char byte0;
+ struct {
+ unsigned char reserved:3; /* Reserf */
+ unsigned char eld_ver:5; /* ELD Version Number */
+ /* 00000b - reserved
+ * 00001b - first rev, obsoleted
+ * 00010b - version 2, supporting CEA version
+ * 861D or below
+ * 00011b:11111b - reserved
+ * for future
+ */
+ };
+ };
+
+ /* Byte[1] = Vendor Version Field */
+ union {
+ unsigned char vendor_version;
+ struct {
+ unsigned char reserved1:3;
+ unsigned char veld_ver:5; /* Version number of the ELD
+ * extension. This value is
+ * provisioned and unique to
+ * each vendor.
+ */
+ };
+ };
+
+ /* Byte[2] = Baseline Length field */
+ unsigned char baseline_eld_length; /* Length of the Baseline structure
+ * divided by Four.
+ */
+
+ /* Byte [3] = Reserved for future use */
+ unsigned char byte3;
+
+ /* Starting of the BaseLine EELD structure
+ * Byte[4] = Monitor Name Length
+ */
+ union {
+ unsigned char byte4;
+ struct {
+ unsigned char mnl:5;
+ unsigned char cea_edid_rev_id:3;
+ };
+ };
+
+ /* Byte[5] = Capabilities */
+ union {
+ unsigned char capabilities;
+ struct {
+ unsigned char hdcp:1; /* HDCP support */
+ unsigned char ai_support:1; /* AI support */
+ unsigned char connection_type:2; /* Connection type
+ * 00 - HDMI
+ * 01 - DP
+ * 10 -11 Reserved
+ * for future
+ * connection types
+ */
+ unsigned char sadc:4; /* Indicates number of 3 bytes
+ * Short Audio Descriptors.
+ */
+ };
+ };
+
+ /* Byte[6] = Audio Synch Delay */
+ unsigned char audio_synch_delay; /* Amount of time reported by the
+ * sink that the video trails audio
+ * in milliseconds.
+ */
+
+ /* Byte[7] = Speaker Allocation Block */
+ union {
+ unsigned char speaker_allocation_block;
+ struct {
+ unsigned char flr:1; /*Front Left and Right channels*/
+ unsigned char lfe:1; /*Low Frequency Effect channel*/
+ unsigned char fc:1; /*Center transmission channel*/
+ unsigned char rlr:1; /*Rear Left and Right channels*/
+ unsigned char rc:1; /*Rear Center channel*/
+ unsigned char flrc:1; /*Front left and Right of Center
+ *transmission channels
+ */
+ unsigned char rlrc:1; /*Rear left and Right of Center
+ *transmission channels
+ */
+ unsigned char reserved3:1; /* Reserved */
+ };
+ };
+
+ /* Byte[8 - 15] - 8 Byte port identification value */
+ unsigned char port_id_value[8];
+
+ /* Byte[16 - 17] - 2 Byte Manufacturer ID */
+ unsigned char manufacturer_id[2];
+
+ /* Byte[18 - 19] - 2 Byte Product ID */
+ unsigned char product_id[2];
+
+ /* Byte [20-83] - 64 Bytes of BaseLine Data */
+ unsigned char mn_sand_sads[64]; /* This will include
+ * - ASCII string of Monitor name
+ * - List of 3 byte SADs
+ * - Zero padding
+ */
+
+ /* Vendor ELD Block should continue here!
+ * No Vendor ELD block defined as of now.
+ */
+ } __packed;
+};
+
+/**
+ * enum had_status - Audio stream states
+ *
+ * @STREAM_INIT: Stream initialized
+ * @STREAM_RUNNING: Stream running
+ * @STREAM_PAUSED: Stream paused
+ * @STREAM_DROPPED: Stream dropped
+ */
+enum had_stream_status {
+ STREAM_INIT = 0,
+ STREAM_RUNNING = 1,
+ STREAM_PAUSED = 2,
+ STREAM_DROPPED = 3
+};
+
+/**
+ * enum had_status_stream - HAD stream states
+ */
+enum had_status_stream {
+ HAD_INIT = 0,
+ HAD_RUNNING_STREAM,
+};
+
+enum had_drv_status {
+ HAD_DRV_CONNECTED,
+ HAD_DRV_RUNNING,
+ HAD_DRV_DISCONNECTED,
+ HAD_DRV_SUSPENDED,
+ HAD_DRV_ERR,
+};
+
+/* enum intel_had_aud_buf_type - HDMI controller ring buffer types */
+enum intel_had_aud_buf_type {
+ HAD_BUF_TYPE_A = 0,
+ HAD_BUF_TYPE_B = 1,
+ HAD_BUF_TYPE_C = 2,
+ HAD_BUF_TYPE_D = 3,
+};
+
+enum num_aud_ch {
+ CH_STEREO = 0,
+ CH_THREE_FOUR = 1,
+ CH_FIVE_SIX = 2,
+ CH_SEVEN_EIGHT = 3
+};
+
+/* HDMI Controller register offsets - audio domain common */
+/* Base address for below regs = 0x65000 */
+enum hdmi_ctrl_reg_offset_common {
+ AUDIO_HDMI_CONFIG_A = 0x000,
+ AUDIO_HDMI_CONFIG_B = 0x800,
+ AUDIO_HDMI_CONFIG_C = 0x900,
+};
+/* HDMI controller register offsets */
+enum hdmi_ctrl_reg_offset_v1 {
+ AUD_CONFIG = 0x0,
+ AUD_CH_STATUS_0 = 0x08,
+ AUD_CH_STATUS_1 = 0x0C,
+ AUD_HDMI_CTS = 0x10,
+ AUD_N_ENABLE = 0x14,
+ AUD_SAMPLE_RATE = 0x18,
+ AUD_BUF_CONFIG = 0x20,
+ AUD_BUF_CH_SWAP = 0x24,
+ AUD_BUF_A_ADDR = 0x40,
+ AUD_BUF_A_LENGTH = 0x44,
+ AUD_BUF_B_ADDR = 0x48,
+ AUD_BUF_B_LENGTH = 0x4c,
+ AUD_BUF_C_ADDR = 0x50,
+ AUD_BUF_C_LENGTH = 0x54,
+ AUD_BUF_D_ADDR = 0x58,
+ AUD_BUF_D_LENGTH = 0x5c,
+ AUD_CNTL_ST = 0x60,
+ AUD_HDMI_STATUS = 0x68,
+ AUD_HDMIW_INFOFR = 0x114,
+};
+
+/*
+ * Delta changes in HDMI controller register offsets
+ * compare to v1 version
+ */
+
+enum hdmi_ctrl_reg_offset_v2 {
+ AUD_HDMI_STATUS_v2 = 0x64,
+ AUD_HDMIW_INFOFR_v2 = 0x68,
+};
+
+/*
+ * CEA speaker placement:
+ *
+ * FL FLC FC FRC FR
+ *
+ * LFE
+ *
+ * RL RLC RC RRC RR
+ *
+ * The Left/Right Surround channel _notions_ LS/RS in SMPTE 320M
+ * corresponds to CEA RL/RR; The SMPTE channel _assignment_ C/LFE is
+ * swapped to CEA LFE/FC.
+ */
+enum cea_speaker_placement {
+ FL = (1 << 0), /* Front Left */
+ FC = (1 << 1), /* Front Center */
+ FR = (1 << 2), /* Front Right */
+ FLC = (1 << 3), /* Front Left Center */
+ FRC = (1 << 4), /* Front Right Center */
+ RL = (1 << 5), /* Rear Left */
+ RC = (1 << 6), /* Rear Center */
+ RR = (1 << 7), /* Rear Right */
+ RLC = (1 << 8), /* Rear Left Center */
+ RRC = (1 << 9), /* Rear Right Center */
+ LFE = (1 << 10), /* Low Frequency Effect */
+};
+
+struct cea_channel_speaker_allocation {
+ int ca_index;
+ int speakers[8];
+
+ /* derived values, just for convenience */
+ int channels;
+ int spk_mask;
+};
+
+struct channel_map_table {
+ unsigned char map; /* ALSA API channel map position */
+ unsigned char cea_slot; /* CEA slot value */
+ int spk_mask; /* speaker position bit mask */
+};
+
+/**
+ * union aud_cfg - Audio configuration
+ *
+ * @cfg_regx: individual register bits
+ * @cfg_regval: full register value
+ *
+ */
+union aud_cfg {
+ struct {
+ u32 aud_en:1;
+ u32 layout:1;
+ u32 fmt:2;
+ u32 num_ch:2;
+ u32 rsvd0:1;
+ u32 set:1;
+ u32 flat:1;
+ u32 val_bit:1;
+ u32 user_bit:1;
+ u32 underrun:1;
+ u32 rsvd1:20;
+ } cfg_regx;
+ struct {
+ u32 aud_en:1;
+ u32 layout:1;
+ u32 fmt:2;
+ u32 num_ch:3;
+ u32 set:1;
+ u32 flat:1;
+ u32 val_bit:1;
+ u32 user_bit:1;
+ u32 underrun:1;
+ u32 packet_mode:1;
+ u32 left_align:1;
+ u32 bogus_sample:1;
+ u32 dp_modei:1;
+ u32 rsvd:16;
+ } cfg_regx_v2;
+ u32 cfg_regval;
+};
+
+/**
+ * union aud_ch_status_0 - Audio Channel Status 0 Attributes
+ *
+ * @status_0_regx:individual register bits
+ * @status_0_regval:full register value
+ *
+ */
+union aud_ch_status_0 {
+ struct {
+ u32 ch_status:1;
+ u32 lpcm_id:1;
+ u32 cp_info:1;
+ u32 format:3;
+ u32 mode:2;
+ u32 ctg_code:8;
+ u32 src_num:4;
+ u32 ch_num:4;
+ u32 samp_freq:4;
+ u32 clk_acc:2;
+ u32 rsvd:2;
+ } status_0_regx;
+ u32 status_0_regval;
+};
+
+/**
+ * union aud_ch_status_1 - Audio Channel Status 1 Attributes
+ *
+ * @status_1_regx: individual register bits
+ * @status_1_regval: full register value
+ *
+ */
+union aud_ch_status_1 {
+ struct {
+ u32 max_wrd_len:1;
+ u32 wrd_len:3;
+ u32 rsvd:28;
+ } status_1_regx;
+ u32 status_1_regval;
+};
+
+/**
+ * union aud_hdmi_cts - CTS register
+ *
+ * @cts_regx: individual register bits
+ * @cts_regval: full register value
+ *
+ */
+union aud_hdmi_cts {
+ struct {
+ u32 cts_val:20;
+ u32 en_cts_prog:1;
+ u32 rsvd:11;
+ } cts_regx;
+ struct {
+ u32 cts_val:24;
+ u32 en_cts_prog:1;
+ u32 rsvd:7;
+ } cts_regx_v2;
+ u32 cts_regval;
+};
+
+/**
+ * union aud_hdmi_n_enable - N register
+ *
+ * @n_regx: individual register bits
+ * @n_regval: full register value
+ *
+ */
+union aud_hdmi_n_enable {
+ struct {
+ u32 n_val:20;
+ u32 en_n_prog:1;
+ u32 rsvd:11;
+ } n_regx;
+ struct {
+ u32 n_val:24;
+ u32 en_n_prog:1;
+ u32 rsvd:7;
+ } n_regx_v2;
+ u32 n_regval;
+};
+
+/**
+ * union aud_buf_config - Audio Buffer configurations
+ *
+ * @buf_cfg_regx: individual register bits
+ * @buf_cfgval: full register value
+ *
+ */
+union aud_buf_config {
+ struct {
+ u32 fifo_width:8;
+ u32 rsvd0:8;
+ u32 aud_delay:8;
+ u32 rsvd1:8;
+ } buf_cfg_regx;
+ struct {
+ u32 audio_fifo_watermark:8;
+ u32 dma_fifo_watermark:3;
+ u32 rsvd0:5;
+ u32 aud_delay:8;
+ u32 rsvd1:8;
+ } buf_cfg_regx_v2;
+ u32 buf_cfgval;
+};
+
+/**
+ * union aud_buf_ch_swap - Audio Sample Swapping offset
+ *
+ * @buf_ch_swap_regx: individual register bits
+ * @buf_ch_swap_val: full register value
+ *
+ */
+union aud_buf_ch_swap {
+ struct {
+ u32 first_0:3;
+ u32 second_0:3;
+ u32 first_1:3;
+ u32 second_1:3;
+ u32 first_2:3;
+ u32 second_2:3;
+ u32 first_3:3;
+ u32 second_3:3;
+ u32 rsvd:8;
+ } buf_ch_swap_regx;
+ u32 buf_ch_swap_val;
+};
+
+/**
+ * union aud_buf_addr - Address for Audio Buffer
+ *
+ * @buf_addr_regx: individual register bits
+ * @buf_addr_val: full register value
+ *
+ */
+union aud_buf_addr {
+ struct {
+ u32 valid:1;
+ u32 intr_en:1;
+ u32 rsvd:4;
+ u32 addr:26;
+ } buf_addr_regx;
+ u32 buf_addr_val;
+};
+
+/**
+ * union aud_buf_len - Length of Audio Buffer
+ *
+ * @buf_len_regx: individual register bits
+ * @buf_len_val: full register value
+ *
+ */
+union aud_buf_len {
+ struct {
+ u32 buf_len:20;
+ u32 rsvd:12;
+ } buf_len_regx;
+ u32 buf_len_val;
+};
+
+/**
+ * union aud_ctrl_st - Audio Control State Register offset
+ *
+ * @ctrl_regx: individual register bits
+ * @ctrl_val: full register value
+ *
+ */
+union aud_ctrl_st {
+ struct {
+ u32 ram_addr:4;
+ u32 eld_ack:1;
+ u32 eld_addr:4;
+ u32 eld_buf_size:5;
+ u32 eld_valid:1;
+ u32 cp_ready:1;
+ u32 dip_freq:2;
+ u32 dip_idx:3;
+ u32 dip_en_sta:4;
+ u32 rsvd:7;
+ } ctrl_regx;
+ u32 ctrl_val;
+};
+
+/**
+ * union aud_info_frame1 - Audio HDMI Widget Data Island Packet offset
+ *
+ * @fr1_regx: individual register bits
+ * @fr1_val: full register value
+ *
+ */
+union aud_info_frame1 {
+ struct {
+ u32 pkt_type:8;
+ u32 ver_num:8;
+ u32 len:5;
+ u32 rsvd:11;
+ } fr1_regx;
+ u32 fr1_val;
+};
+
+/**
+ * union aud_info_frame2 - DIP frame 2
+ *
+ * @fr2_regx: individual register bits
+ * @fr2_val: full register value
+ *
+ */
+union aud_info_frame2 {
+ struct {
+ u32 chksum:8;
+ u32 chnl_cnt:3;
+ u32 rsvd0:1;
+ u32 coding_type:4;
+ u32 smpl_size:2;
+ u32 smpl_freq:3;
+ u32 rsvd1:3;
+ u32 format:8;
+ } fr2_regx;
+ u32 fr2_val;
+};
+
+/**
+ * union aud_info_frame3 - DIP frame 3
+ *
+ * @fr3_regx: individual register bits
+ * @fr3_val: full register value
+ *
+ */
+union aud_info_frame3 {
+ struct {
+ u32 chnl_alloc:8;
+ u32 rsvd0:3;
+ u32 lsv:4;
+ u32 dm_inh:1;
+ u32 rsvd1:16;
+ } fr3_regx;
+ u32 fr3_val;
+};
+
+enum hdmi_connector_status {
+ hdmi_connector_status_connected = 1,
+ hdmi_connector_status_disconnected = 2,
+ hdmi_connector_status_unknown = 3,
+};
+
+#define HDMI_AUDIO_UNDERRUN (1UL<<31)
+#define HDMI_AUDIO_BUFFER_DONE (1UL<<29)
+
+
+#define PORT_ENABLE (1 << 31)
+#define SDVO_AUDIO_ENABLE (1 << 6)
+
+enum had_caps_list {
+ HAD_GET_ELD = 1,
+ HAD_GET_DISPLAY_RATE,
+ HAD_SET_ENABLE_AUDIO,
+ HAD_SET_DISABLE_AUDIO,
+ HAD_SET_ENABLE_AUDIO_INT,
+ HAD_SET_DISABLE_AUDIO_INT,
+};
+
+enum had_event_type {
+ HAD_EVENT_HOT_PLUG = 1,
+ HAD_EVENT_HOT_UNPLUG,
+ HAD_EVENT_MODE_CHANGING,
+ HAD_EVENT_AUDIO_BUFFER_DONE,
+ HAD_EVENT_AUDIO_BUFFER_UNDERRUN,
+ HAD_EVENT_QUERY_IS_AUDIO_BUSY,
+ HAD_EVENT_QUERY_IS_AUDIO_SUSPENDED,
+};
+
+/*
+ * HDMI Display Controller Audio Interface
+ *
+ */
+typedef int (*had_event_call_back) (enum had_event_type event_type,
+ void *ctxt_info);
+
+struct hdmi_audio_registers_ops {
+ int (*hdmi_audio_get_register_base)(uint32_t **reg_base,
+ uint32_t *config_offset);
+ int (*hdmi_audio_read_register)(uint32_t reg_addr, uint32_t *data);
+ int (*hdmi_audio_write_register)(uint32_t reg_addr, uint32_t data);
+ int (*hdmi_audio_read_modify)(uint32_t reg_addr, uint32_t data,
+ uint32_t mask);
+};
+
+struct hdmi_audio_query_set_ops {
+ int (*hdmi_audio_get_caps)(enum had_caps_list query_element,
+ void *capabilties);
+ int (*hdmi_audio_set_caps)(enum had_caps_list set_element,
+ void *capabilties);
+};
+
+struct hdmi_audio_event {
+ int type;
+};
+
+struct snd_intel_had_interface {
+ const char *name;
+ int (*query)(void *had_data, struct hdmi_audio_event event);
+ int (*suspend)(void *had_data, struct hdmi_audio_event event);
+ int (*resume)(void *had_data);
+};
+
+bool mid_hdmi_audio_is_busy(void *dev);
+bool mid_hdmi_audio_suspend(void *dev);
+void mid_hdmi_audio_resume(void *dev);
+void mid_hdmi_audio_signal_event(enum had_event_type event);
+int mid_hdmi_audio_setup(
+ had_event_call_back audio_callbacks,
+ struct hdmi_audio_registers_ops *reg_ops,
+ struct hdmi_audio_query_set_ops *query_ops);
+int mid_hdmi_audio_register(
+ struct snd_intel_had_interface *driver,
+ void *had_data);
+
+#endif
--
2.9.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH V3 4/5] ALSA: x86: hdmi: Add audio support for BYT and CHT
2017-01-10 5:08 [PATCH V3 0/5] Add support for Legacy HDMI audio drivers Jerome Anand
` (2 preceding siblings ...)
2017-01-10 5:08 ` [PATCH V3 3/5] ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T Jerome Anand
@ 2017-01-10 5:08 ` Jerome Anand
2017-01-18 12:03 ` Takashi Iwai
2017-01-10 5:08 ` [PATCH V3 5/5] ALSA: x86: hdmi: continue playback even when display resolution changes Jerome Anand
4 siblings, 1 reply; 14+ messages in thread
From: Jerome Anand @ 2017-01-10 5:08 UTC (permalink / raw)
To: intel-gfx, alsa-devel; +Cc: tiwai, broonie, rakesh.a.ughreja
Hdmi audio driver based on the child platform device
created by gfx driver is implemented.
This audio driver is derived from legacy intel
hdmi audio driver.
The interfaces for interaction between gfx and audio
are updated and the driver implementation updated to
derive interrupts in its own address space based on
irq chip framework
The changes to calculate sub-period positions was triggered
by David Henningsson <david.henningsson@canonical.com> and is
accomodated in this patch
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jerome Anand <jerome.anand@intel.com>
---
sound/x86/Makefile | 2 +
sound/x86/intel_hdmi_audio.c | 1917 ++++++++++++++++++++++++++++++++++++++
sound/x86/intel_hdmi_audio.h | 201 ++++
sound/x86/intel_hdmi_audio_if.c | 551 +++++++++++
sound/x86/intel_hdmi_lpe_audio.c | 15 +-
5 files changed, 2680 insertions(+), 6 deletions(-)
create mode 100644 sound/x86/intel_hdmi_audio.c
create mode 100644 sound/x86/intel_hdmi_audio.h
create mode 100644 sound/x86/intel_hdmi_audio_if.c
diff --git a/sound/x86/Makefile b/sound/x86/Makefile
index 54d002d..a8d1a8a 100644
--- a/sound/x86/Makefile
+++ b/sound/x86/Makefile
@@ -1,6 +1,8 @@
ccflags-y += -Iinclude/drm
snd-hdmi-lpe-audio-objs += \
+ intel_hdmi_audio.o \
+ intel_hdmi_audio_if.o \
intel_hdmi_lpe_audio.o
obj-$(CONFIG_HDMI_LPE_AUDIO) += snd-hdmi-lpe-audio.o
diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c
new file mode 100644
index 0000000..5305c5c
--- /dev/null
+++ b/sound/x86/intel_hdmi_audio.c
@@ -0,0 +1,1917 @@
+/*
+ * intel_hdmi_audio.c - Intel HDMI audio driver
+ *
+ * Copyright (C) 2016 Intel Corp
+ * Authors: Sailaja Bandarupalli <sailaja.bandarupalli@intel.com>
+ * Ramesh Babu K V <ramesh.babu@intel.com>
+ * Vaibhav Agarwal <vaibhav.agarwal@intel.com>
+ * Jerome Anand <jerome.anand@intel.com>
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ * ALSA driver for Intel HDMI audio
+ */
+
+#define pr_fmt(fmt) "had: " fmt
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <asm/cacheflush.h>
+#include <sound/pcm.h>
+#include <sound/core.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/control.h>
+#include <sound/initval.h>
+#include "intel_hdmi_audio.h"
+
+static DEFINE_MUTEX(had_mutex);
+
+/*standard module options for ALSA. This module supports only one card*/
+static int hdmi_card_index = SNDRV_DEFAULT_IDX1;
+static char *hdmi_card_id = SNDRV_DEFAULT_STR1;
+static struct snd_intelhad *had_data;
+
+module_param_named(index, hdmi_card_index, int, 0444);
+MODULE_PARM_DESC(index,
+ "Index value for INTEL Intel HDMI Audio controller.");
+module_param_named(id, hdmi_card_id, charp, 0444);
+MODULE_PARM_DESC(id,
+ "ID string for INTEL Intel HDMI Audio controller.");
+
+/*
+ * ELD SA bits in the CEA Speaker Allocation data block
+*/
+static int eld_speaker_allocation_bits[] = {
+ [0] = FL | FR,
+ [1] = LFE,
+ [2] = FC,
+ [3] = RL | RR,
+ [4] = RC,
+ [5] = FLC | FRC,
+ [6] = RLC | RRC,
+ /* the following are not defined in ELD yet */
+ [7] = 0,
+};
+
+/*
+ * This is an ordered list!
+ *
+ * The preceding ones have better chances to be selected by
+ * hdmi_channel_allocation().
+ */
+static struct cea_channel_speaker_allocation channel_allocations[] = {
+/* channel: 7 6 5 4 3 2 1 0 */
+{ .ca_index = 0x00, .speakers = { 0, 0, 0, 0, 0, 0, FR, FL } },
+ /* 2.1 */
+{ .ca_index = 0x01, .speakers = { 0, 0, 0, 0, 0, LFE, FR, FL } },
+ /* Dolby Surround */
+{ .ca_index = 0x02, .speakers = { 0, 0, 0, 0, FC, 0, FR, FL } },
+ /* surround40 */
+{ .ca_index = 0x08, .speakers = { 0, 0, RR, RL, 0, 0, FR, FL } },
+ /* surround41 */
+{ .ca_index = 0x09, .speakers = { 0, 0, RR, RL, 0, LFE, FR, FL } },
+ /* surround50 */
+{ .ca_index = 0x0a, .speakers = { 0, 0, RR, RL, FC, 0, FR, FL } },
+ /* surround51 */
+{ .ca_index = 0x0b, .speakers = { 0, 0, RR, RL, FC, LFE, FR, FL } },
+ /* 6.1 */
+{ .ca_index = 0x0f, .speakers = { 0, RC, RR, RL, FC, LFE, FR, FL } },
+ /* surround71 */
+{ .ca_index = 0x13, .speakers = { RRC, RLC, RR, RL, FC, LFE, FR, FL } },
+
+{ .ca_index = 0x03, .speakers = { 0, 0, 0, 0, FC, LFE, FR, FL } },
+{ .ca_index = 0x04, .speakers = { 0, 0, 0, RC, 0, 0, FR, FL } },
+{ .ca_index = 0x05, .speakers = { 0, 0, 0, RC, 0, LFE, FR, FL } },
+{ .ca_index = 0x06, .speakers = { 0, 0, 0, RC, FC, 0, FR, FL } },
+{ .ca_index = 0x07, .speakers = { 0, 0, 0, RC, FC, LFE, FR, FL } },
+{ .ca_index = 0x0c, .speakers = { 0, RC, RR, RL, 0, 0, FR, FL } },
+{ .ca_index = 0x0d, .speakers = { 0, RC, RR, RL, 0, LFE, FR, FL } },
+{ .ca_index = 0x0e, .speakers = { 0, RC, RR, RL, FC, 0, FR, FL } },
+{ .ca_index = 0x10, .speakers = { RRC, RLC, RR, RL, 0, 0, FR, FL } },
+{ .ca_index = 0x11, .speakers = { RRC, RLC, RR, RL, 0, LFE, FR, FL } },
+{ .ca_index = 0x12, .speakers = { RRC, RLC, RR, RL, FC, 0, FR, FL } },
+{ .ca_index = 0x14, .speakers = { FRC, FLC, 0, 0, 0, 0, FR, FL } },
+{ .ca_index = 0x15, .speakers = { FRC, FLC, 0, 0, 0, LFE, FR, FL } },
+{ .ca_index = 0x16, .speakers = { FRC, FLC, 0, 0, FC, 0, FR, FL } },
+{ .ca_index = 0x17, .speakers = { FRC, FLC, 0, 0, FC, LFE, FR, FL } },
+{ .ca_index = 0x18, .speakers = { FRC, FLC, 0, RC, 0, 0, FR, FL } },
+{ .ca_index = 0x19, .speakers = { FRC, FLC, 0, RC, 0, LFE, FR, FL } },
+{ .ca_index = 0x1a, .speakers = { FRC, FLC, 0, RC, FC, 0, FR, FL } },
+{ .ca_index = 0x1b, .speakers = { FRC, FLC, 0, RC, FC, LFE, FR, FL } },
+{ .ca_index = 0x1c, .speakers = { FRC, FLC, RR, RL, 0, 0, FR, FL } },
+{ .ca_index = 0x1d, .speakers = { FRC, FLC, RR, RL, 0, LFE, FR, FL } },
+{ .ca_index = 0x1e, .speakers = { FRC, FLC, RR, RL, FC, 0, FR, FL } },
+{ .ca_index = 0x1f, .speakers = { FRC, FLC, RR, RL, FC, LFE, FR, FL } },
+};
+
+static struct channel_map_table map_tables[] = {
+ { SNDRV_CHMAP_FL, 0x00, FL },
+ { SNDRV_CHMAP_FR, 0x01, FR },
+ { SNDRV_CHMAP_RL, 0x04, RL },
+ { SNDRV_CHMAP_RR, 0x05, RR },
+ { SNDRV_CHMAP_LFE, 0x02, LFE },
+ { SNDRV_CHMAP_FC, 0x03, FC },
+ { SNDRV_CHMAP_RLC, 0x06, RLC },
+ { SNDRV_CHMAP_RRC, 0x07, RRC },
+ {} /* terminator */
+};
+
+/* hardware capability structure */
+static const struct snd_pcm_hardware snd_intel_hadstream = {
+ .info = (SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_DOUBLE |
+ SNDRV_PCM_INFO_MMAP|
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH),
+ .formats = (SNDRV_PCM_FMTBIT_S24 |
+ SNDRV_PCM_FMTBIT_U24),
+ .rates = SNDRV_PCM_RATE_32000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_176400 |
+ SNDRV_PCM_RATE_192000,
+ .rate_min = HAD_MIN_RATE,
+ .rate_max = HAD_MAX_RATE,
+ .channels_min = HAD_MIN_CHANNEL,
+ .channels_max = HAD_MAX_CHANNEL,
+ .buffer_bytes_max = HAD_MAX_BUFFER,
+ .period_bytes_min = HAD_MIN_PERIOD_BYTES,
+ .period_bytes_max = HAD_MAX_PERIOD_BYTES,
+ .periods_min = HAD_MIN_PERIODS,
+ .periods_max = HAD_MAX_PERIODS,
+ .fifo_size = HAD_FIFO_SIZE,
+};
+
+/* Register access functions */
+
+inline int had_get_hwstate(struct snd_intelhad *intelhaddata)
+{
+ /* Check for device presence -SW state */
+ if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) {
+ pr_debug("%s:Device not connected:%d\n", __func__,
+ intelhaddata->drv_status);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+inline int had_get_caps(enum had_caps_list query, void *caps)
+{
+ int retval;
+ struct snd_intelhad *intelhaddata = had_data;
+
+ retval = had_get_hwstate(intelhaddata);
+ if (!retval)
+ retval = intelhaddata->query_ops.hdmi_audio_get_caps(query,
+ caps);
+
+ return retval;
+}
+
+inline int had_set_caps(enum had_caps_list set_element, void *caps)
+{
+ int retval;
+ struct snd_intelhad *intelhaddata = had_data;
+
+ retval = had_get_hwstate(intelhaddata);
+ if (!retval)
+ retval = intelhaddata->query_ops.hdmi_audio_set_caps(
+ set_element, caps);
+
+ return retval;
+}
+
+inline int had_read_register(uint32_t offset, uint32_t *data)
+{
+ int retval;
+ struct snd_intelhad *intelhaddata = had_data;
+
+ retval = had_get_hwstate(intelhaddata);
+ if (!retval)
+ retval = intelhaddata->reg_ops.hdmi_audio_read_register(
+ offset + intelhaddata->audio_cfg_offset, data);
+
+ return retval;
+}
+
+inline int had_write_register(uint32_t offset, uint32_t data)
+{
+ int retval;
+ struct snd_intelhad *intelhaddata = had_data;
+
+ retval = had_get_hwstate(intelhaddata);
+ if (!retval)
+ retval = intelhaddata->reg_ops.hdmi_audio_write_register(
+ offset + intelhaddata->audio_cfg_offset, data);
+
+ return retval;
+}
+
+inline int had_read_modify(uint32_t offset, uint32_t data, uint32_t mask)
+{
+ int retval;
+ struct snd_intelhad *intelhaddata = had_data;
+
+ retval = had_get_hwstate(intelhaddata);
+ if (!retval)
+ retval = intelhaddata->reg_ops.hdmi_audio_read_modify(
+ offset + intelhaddata->audio_cfg_offset,
+ data, mask);
+
+ return retval;
+}
+/**
+ * had_read_modify_aud_config_v2 - Specific function to read-modify
+ * AUD_CONFIG register on VLV2.The had_read_modify() function should not
+ * directly be used on VLV2 for updating AUD_CONFIG register.
+ * This is because:
+ * Bit6 of AUD_CONFIG register is writeonly due to a silicon bug on VLV2
+ * HDMI IP. As a result a read-modify of AUD_CONFIG regiter will always
+ * clear bit6. AUD_CONFIG[6:4] represents the "channels" field of the
+ * register. This field should be 1xy binary for configuration with 6 or
+ * more channels. Read-modify of AUD_CONFIG (Eg. for enabling audio)
+ * causes the "channels" field to be updated as 0xy binary resulting in
+ * bad audio. The fix is to always write the AUD_CONFIG[6:4] with
+ * appropriate value when doing read-modify of AUD_CONFIG register.
+ *
+ * @substream: the current substream or NULL if no active substream
+ * @data : data to be written
+ * @mask : mask
+ *
+ */
+inline int had_read_modify_aud_config_v2(struct snd_pcm_substream *substream,
+ uint32_t data, uint32_t mask)
+{
+ union aud_cfg cfg_val = {.cfg_regval = 0};
+ u8 channels;
+
+ /*
+ * If substream is NULL, there is no active stream.
+ * In this case just set channels to 2
+ */
+ if (substream)
+ channels = substream->runtime->channels;
+ else
+ channels = 2;
+ cfg_val.cfg_regx_v2.num_ch = channels - 2;
+
+ data = data | cfg_val.cfg_regval;
+ mask = mask | AUD_CONFIG_CH_MASK_V2;
+
+ pr_debug("%s : data = %x, mask =%x\n", __func__, data, mask);
+
+ return had_read_modify(AUD_CONFIG, data, mask);
+}
+
+/**
+ * snd_intelhad_enable_audio_v1 - to enable audio
+ *
+ * @substream: Current substream or NULL if no active substream.
+ * @enable: 1 if audio is to be enabled; 0 if audio is to be disabled.
+ *
+ */
+static void snd_intelhad_enable_audio_v1(struct snd_pcm_substream *substream,
+ u8 enable)
+{
+ had_read_modify(AUD_CONFIG, enable, BIT(0));
+}
+
+/**
+ * snd_intelhad_enable_audio_v2 - to enable audio
+ *
+ * @substream: Current substream or NULL if no active substream.
+ * @enable: 1 if audio is to be enabled; 0 if audio is to be disabled.
+ */
+static void snd_intelhad_enable_audio_v2(struct snd_pcm_substream *substream,
+ u8 enable)
+{
+ had_read_modify_aud_config_v2(substream, enable, BIT(0));
+}
+
+/**
+ * snd_intelhad_reset_audio_v1 - to reset audio subsystem
+ *
+ * @reset: 1 to reset audio; 0 to bring audio out of reset.
+ *
+ */
+static void snd_intelhad_reset_audio_v1(u8 reset)
+{
+ had_write_register(AUD_HDMI_STATUS, reset);
+}
+
+/**
+ * snd_intelhad_reset_audio_v2 - to reset audio subsystem
+ *
+ * @reset: 1 to reset audio; 0 to bring audio out of reset.
+ *
+ */
+static void snd_intelhad_reset_audio_v2(u8 reset)
+{
+ had_write_register(AUD_HDMI_STATUS_v2, reset);
+}
+
+/**
+ * had_prog_status_reg - to initialize audio channel status registers
+ *
+ * @substream:substream for which the prepare function is called
+ * @intelhaddata:substream private data
+ *
+ * This function is called in the prepare callback
+ */
+static int had_prog_status_reg(struct snd_pcm_substream *substream,
+ struct snd_intelhad *intelhaddata)
+{
+ union aud_cfg cfg_val = {.cfg_regval = 0};
+ union aud_ch_status_0 ch_stat0 = {.status_0_regval = 0};
+ union aud_ch_status_1 ch_stat1 = {.status_1_regval = 0};
+ int format;
+
+ pr_debug("Entry %s\n", __func__);
+
+ ch_stat0.status_0_regx.lpcm_id = (intelhaddata->aes_bits &
+ IEC958_AES0_NONAUDIO)>>1;
+ ch_stat0.status_0_regx.clk_acc = (intelhaddata->aes_bits &
+ IEC958_AES3_CON_CLOCK)>>4;
+ cfg_val.cfg_regx.val_bit = ch_stat0.status_0_regx.lpcm_id;
+
+ switch (substream->runtime->rate) {
+ case AUD_SAMPLE_RATE_32:
+ ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_32KHZ;
+ break;
+
+ case AUD_SAMPLE_RATE_44_1:
+ ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_44KHZ;
+ break;
+ case AUD_SAMPLE_RATE_48:
+ ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_48KHZ;
+ break;
+ case AUD_SAMPLE_RATE_88_2:
+ ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_88KHZ;
+ break;
+ case AUD_SAMPLE_RATE_96:
+ ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_96KHZ;
+ break;
+ case AUD_SAMPLE_RATE_176_4:
+ ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_176KHZ;
+ break;
+ case AUD_SAMPLE_RATE_192:
+ ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_192KHZ;
+ break;
+
+ default:
+ /* control should never come here */
+ return -EINVAL;
+ break;
+
+ }
+ had_write_register(AUD_CH_STATUS_0, ch_stat0.status_0_regval);
+
+ format = substream->runtime->format;
+
+ if (format == SNDRV_PCM_FORMAT_S16_LE) {
+ ch_stat1.status_1_regx.max_wrd_len = MAX_SMPL_WIDTH_20;
+ ch_stat1.status_1_regx.wrd_len = SMPL_WIDTH_16BITS;
+ } else if (format == SNDRV_PCM_FORMAT_S24_LE) {
+ ch_stat1.status_1_regx.max_wrd_len = MAX_SMPL_WIDTH_24;
+ ch_stat1.status_1_regx.wrd_len = SMPL_WIDTH_24BITS;
+ } else {
+ ch_stat1.status_1_regx.max_wrd_len = 0;
+ ch_stat1.status_1_regx.wrd_len = 0;
+ }
+ had_write_register(AUD_CH_STATUS_1, ch_stat1.status_1_regval);
+ return 0;
+}
+
+/**
+ * snd_intelhad_prog_audio_ctrl_v2 - to initialize audio
+ * registers and buffer confgiuration registers
+ *
+ * @substream:substream for which the prepare function is called
+ * @intelhaddata:substream private data
+ *
+ * This function is called in the prepare callback
+ */
+int snd_intelhad_prog_audio_ctrl_v2(struct snd_pcm_substream *substream,
+ struct snd_intelhad *intelhaddata)
+{
+ union aud_cfg cfg_val = {.cfg_regval = 0};
+ union aud_buf_config buf_cfg = {.buf_cfgval = 0};
+ u8 channels;
+
+ had_prog_status_reg(substream, intelhaddata);
+
+ buf_cfg.buf_cfg_regx_v2.audio_fifo_watermark = FIFO_THRESHOLD;
+ buf_cfg.buf_cfg_regx_v2.dma_fifo_watermark = DMA_FIFO_THRESHOLD;
+ buf_cfg.buf_cfg_regx_v2.aud_delay = 0;
+ had_write_register(AUD_BUF_CONFIG, buf_cfg.buf_cfgval);
+
+ channels = substream->runtime->channels;
+ cfg_val.cfg_regx_v2.num_ch = channels - 2;
+ if (channels <= 2)
+ cfg_val.cfg_regx_v2.layout = LAYOUT0;
+ else
+ cfg_val.cfg_regx_v2.layout = LAYOUT1;
+
+ had_write_register(AUD_CONFIG, cfg_val.cfg_regval);
+ return 0;
+}
+
+/**
+ * snd_intelhad_prog_audio_ctrl_v1 - to initialize audio
+ * registers and buffer confgiuration registers
+ *
+ * @substream:substream for which the prepare function is called
+ * @intelhaddata:substream private data
+ *
+ * This function is called in the prepare callback
+ */
+int snd_intelhad_prog_audio_ctrl_v1(struct snd_pcm_substream *substream,
+ struct snd_intelhad *intelhaddata)
+{
+ union aud_cfg cfg_val = {.cfg_regval = 0};
+ union aud_buf_config buf_cfg = {.buf_cfgval = 0};
+ u8 channels;
+
+ had_prog_status_reg(substream, intelhaddata);
+
+ buf_cfg.buf_cfg_regx.fifo_width = FIFO_THRESHOLD;
+ buf_cfg.buf_cfg_regx.aud_delay = 0;
+ had_write_register(AUD_BUF_CONFIG, buf_cfg.buf_cfgval);
+
+ channels = substream->runtime->channels;
+
+ switch (channels) {
+ case 1:
+ case 2:
+ cfg_val.cfg_regx.num_ch = CH_STEREO;
+ cfg_val.cfg_regx.layout = LAYOUT0;
+ break;
+
+ case 3:
+ case 4:
+ cfg_val.cfg_regx.num_ch = CH_THREE_FOUR;
+ cfg_val.cfg_regx.layout = LAYOUT1;
+ break;
+
+ case 5:
+ case 6:
+ cfg_val.cfg_regx.num_ch = CH_FIVE_SIX;
+ cfg_val.cfg_regx.layout = LAYOUT1;
+ break;
+
+ case 7:
+ case 8:
+ cfg_val.cfg_regx.num_ch = CH_SEVEN_EIGHT;
+ cfg_val.cfg_regx.layout = LAYOUT1;
+ break;
+
+ }
+
+ had_write_register(AUD_CONFIG, cfg_val.cfg_regval);
+ return 0;
+}
+/*
+ * Compute derived values in channel_allocations[].
+ */
+static void init_channel_allocations(void)
+{
+ int i, j;
+ struct cea_channel_speaker_allocation *p;
+
+ pr_debug("%s: Enter\n", __func__);
+
+ for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
+ p = channel_allocations + i;
+ p->channels = 0;
+ p->spk_mask = 0;
+ for (j = 0; j < ARRAY_SIZE(p->speakers); j++)
+ if (p->speakers[j]) {
+ p->channels++;
+ p->spk_mask |= p->speakers[j];
+ }
+ }
+}
+
+/*
+ * The transformation takes two steps:
+ *
+ * eld->spk_alloc => (eld_speaker_allocation_bits[]) => spk_mask
+ * spk_mask => (channel_allocations[]) => ai->CA
+ *
+ * TODO: it could select the wrong CA from multiple candidates.
+*/
+static int snd_intelhad_channel_allocation(struct snd_intelhad *intelhaddata,
+ int channels)
+{
+ int i;
+ int ca = 0;
+ int spk_mask = 0;
+
+ /*
+ * CA defaults to 0 for basic stereo audio
+ */
+ if (channels <= 2)
+ return 0;
+
+ /*
+ * expand ELD's speaker allocation mask
+ *
+ * ELD tells the speaker mask in a compact(paired) form,
+ * expand ELD's notions to match the ones used by Audio InfoFrame.
+ */
+
+ for (i = 0; i < ARRAY_SIZE(eld_speaker_allocation_bits); i++) {
+ if (intelhaddata->eeld.speaker_allocation_block & (1 << i))
+ spk_mask |= eld_speaker_allocation_bits[i];
+ }
+
+ /* search for the first working match in the CA table */
+ for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
+ if (channels == channel_allocations[i].channels &&
+ (spk_mask & channel_allocations[i].spk_mask) ==
+ channel_allocations[i].spk_mask) {
+ ca = channel_allocations[i].ca_index;
+ break;
+ }
+ }
+
+ pr_debug("HDMI: select CA 0x%x for %d\n", ca, channels);
+
+ return ca;
+}
+
+/* from speaker bit mask to ALSA API channel position */
+static int spk_to_chmap(int spk)
+{
+ struct channel_map_table *t = map_tables;
+
+ for (; t->map; t++) {
+ if (t->spk_mask == spk)
+ return t->map;
+ }
+ return 0;
+}
+
+void had_build_channel_allocation_map(struct snd_intelhad *intelhaddata)
+{
+ int i = 0, c = 0;
+ int spk_mask = 0;
+ struct snd_pcm_chmap_elem *chmap;
+ uint8_t eld_high, eld_high_mask = 0xF0;
+ uint8_t high_msb;
+
+ chmap = kzalloc(sizeof(*chmap), GFP_KERNEL);
+ if (chmap == NULL) {
+ intelhaddata->chmap->chmap = NULL;
+ return;
+ }
+
+ had_get_caps(HAD_GET_ELD, &intelhaddata->eeld);
+
+ pr_debug("eeld.speaker_allocation_block = %x\n",
+ intelhaddata->eeld.speaker_allocation_block);
+
+ /* WA: Fix the max channel supported to 8 */
+
+ /*
+ * Sink may support more than 8 channels, if eld_high has more than
+ * one bit set. SOC supports max 8 channels.
+ * Refer eld_speaker_allocation_bits, for sink speaker allocation
+ */
+
+ /* if 0x2F < eld < 0x4F fall back to 0x2f, else fall back to 0x4F */
+ eld_high = intelhaddata->eeld.speaker_allocation_block & eld_high_mask;
+ if ((eld_high & (eld_high-1)) && (eld_high > 0x1F)) {
+ /* eld_high & (eld_high-1): if more than 1 bit set */
+ /* 0x1F: 7 channels */
+ for (i = 1; i < 4; i++) {
+ high_msb = eld_high & (0x80 >> i);
+ if (high_msb) {
+ intelhaddata->eeld.speaker_allocation_block &=
+ high_msb | 0xF;
+ break;
+ }
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(eld_speaker_allocation_bits); i++) {
+ if (intelhaddata->eeld.speaker_allocation_block & (1 << i))
+ spk_mask |= eld_speaker_allocation_bits[i];
+ }
+
+ for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
+ if (spk_mask == channel_allocations[i].spk_mask) {
+ for (c = 0; c < channel_allocations[i].channels; c++) {
+ chmap->map[c] = spk_to_chmap(
+ channel_allocations[i].speakers[
+ (MAX_SPEAKERS - 1)-c]);
+ }
+ chmap->channels = channel_allocations[i].channels;
+ intelhaddata->chmap->chmap = chmap;
+ break;
+ }
+ }
+ if (i >= ARRAY_SIZE(channel_allocations)) {
+ intelhaddata->chmap->chmap = NULL;
+ kfree(chmap);
+ }
+}
+
+/*
+ ** ALSA API channel-map control callbacks
+ **/
+static int had_chmap_ctl_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol);
+ struct snd_intelhad *intelhaddata = info->private_data;
+
+ if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED)
+ return -ENODEV;
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = HAD_MAX_CHANNEL;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = SNDRV_CHMAP_LAST;
+ return 0;
+}
+
+#ifndef USE_ALSA_DEFAULT_TLV
+static int had_chmap_ctl_tlv(struct snd_kcontrol *kcontrol, int op_flag,
+ unsigned int size, unsigned int __user *tlv)
+{
+ struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol);
+ struct snd_intelhad *intelhaddata = info->private_data;
+
+ if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED)
+ return -ENODEV;
+
+ /* TODO: Fix for query channel map */
+ return -EPERM;
+}
+#endif
+
+static int had_chmap_ctl_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol);
+ struct snd_intelhad *intelhaddata = info->private_data;
+ int i = 0;
+ const struct snd_pcm_chmap_elem *chmap;
+
+ if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED)
+ return -ENODEV;
+ if (intelhaddata->chmap->chmap == NULL)
+ return -ENODATA;
+ chmap = intelhaddata->chmap->chmap;
+ for (i = 0; i < chmap->channels; i++) {
+ ucontrol->value.integer.value[i] = chmap->map[i];
+ pr_debug("chmap->map[%d] = %d\n", i, chmap->map[i]);
+ }
+
+ return 0;
+}
+
+static int had_chmap_ctl_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ /* TODO: Get channel map and set swap register */
+ return -EPERM;
+}
+
+static int had_register_chmap_ctls(struct snd_intelhad *intelhaddata,
+ struct snd_pcm *pcm)
+{
+ int err = 0;
+
+ err = snd_pcm_add_chmap_ctls(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ NULL, 0, (unsigned long)intelhaddata,
+ &intelhaddata->chmap);
+ if (err < 0)
+ return err;
+
+ intelhaddata->chmap->private_data = intelhaddata;
+ intelhaddata->kctl = intelhaddata->chmap->kctl;
+ intelhaddata->kctl->info = had_chmap_ctl_info;
+ intelhaddata->kctl->get = had_chmap_ctl_get;
+ intelhaddata->kctl->put = had_chmap_ctl_put;
+#ifndef USE_ALSA_DEFAULT_TLV
+ intelhaddata->kctl->tlv.c = had_chmap_ctl_tlv;
+#endif
+ intelhaddata->chmap->chmap = NULL;
+ return 0;
+}
+
+/**
+ * snd_intelhad_prog_dip_v1 - to initialize Data Island Packets registers
+ *
+ * @substream:substream for which the prepare function is called
+ * @intelhaddata:substream private data
+ *
+ * This function is called in the prepare callback
+ */
+static void snd_intelhad_prog_dip_v1(struct snd_pcm_substream *substream,
+ struct snd_intelhad *intelhaddata)
+{
+ int i;
+ union aud_ctrl_st ctrl_state = {.ctrl_val = 0};
+ union aud_info_frame2 frame2 = {.fr2_val = 0};
+ union aud_info_frame3 frame3 = {.fr3_val = 0};
+ u8 checksum = 0;
+ int channels;
+
+ channels = substream->runtime->channels;
+
+ had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val);
+
+ frame2.fr2_regx.chnl_cnt = substream->runtime->channels - 1;
+
+ frame3.fr3_regx.chnl_alloc = snd_intelhad_channel_allocation(
+ intelhaddata, channels);
+
+ /*Calculte the byte wide checksum for all valid DIP words*/
+ for (i = 0; i < BYTES_PER_WORD; i++)
+ checksum += (INFO_FRAME_WORD1 >> i*BITS_PER_BYTE) & MASK_BYTE0;
+ for (i = 0; i < BYTES_PER_WORD; i++)
+ checksum += (frame2.fr2_val >> i*BITS_PER_BYTE) & MASK_BYTE0;
+ for (i = 0; i < BYTES_PER_WORD; i++)
+ checksum += (frame3.fr3_val >> i*BITS_PER_BYTE) & MASK_BYTE0;
+
+ frame2.fr2_regx.chksum = -(checksum);
+
+ had_write_register(AUD_HDMIW_INFOFR, INFO_FRAME_WORD1);
+ had_write_register(AUD_HDMIW_INFOFR, frame2.fr2_val);
+ had_write_register(AUD_HDMIW_INFOFR, frame3.fr3_val);
+
+ /* program remaining DIP words with zero */
+ for (i = 0; i < HAD_MAX_DIP_WORDS-VALID_DIP_WORDS; i++)
+ had_write_register(AUD_HDMIW_INFOFR, 0x0);
+
+ ctrl_state.ctrl_regx.dip_freq = 1;
+ ctrl_state.ctrl_regx.dip_en_sta = 1;
+ had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val);
+}
+
+/**
+ * snd_intelhad_prog_dip_v2 - to initialize Data Island Packets registers
+ *
+ * @substream:substream for which the prepare function is called
+ * @intelhaddata:substream private data
+ *
+ * This function is called in the prepare callback
+ */
+static void snd_intelhad_prog_dip_v2(struct snd_pcm_substream *substream,
+ struct snd_intelhad *intelhaddata)
+{
+ int i;
+ union aud_ctrl_st ctrl_state = {.ctrl_val = 0};
+ union aud_info_frame2 frame2 = {.fr2_val = 0};
+ union aud_info_frame3 frame3 = {.fr3_val = 0};
+ u8 checksum = 0;
+ int channels;
+
+ channels = substream->runtime->channels;
+
+ had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val);
+
+ frame2.fr2_regx.chnl_cnt = substream->runtime->channels - 1;
+
+ frame3.fr3_regx.chnl_alloc = snd_intelhad_channel_allocation(
+ intelhaddata, channels);
+
+ /*Calculte the byte wide checksum for all valid DIP words*/
+ for (i = 0; i < BYTES_PER_WORD; i++)
+ checksum += (INFO_FRAME_WORD1 >> i*BITS_PER_BYTE) & MASK_BYTE0;
+ for (i = 0; i < BYTES_PER_WORD; i++)
+ checksum += (frame2.fr2_val >> i*BITS_PER_BYTE) & MASK_BYTE0;
+ for (i = 0; i < BYTES_PER_WORD; i++)
+ checksum += (frame3.fr3_val >> i*BITS_PER_BYTE) & MASK_BYTE0;
+
+ frame2.fr2_regx.chksum = -(checksum);
+
+ had_write_register(AUD_HDMIW_INFOFR_v2, INFO_FRAME_WORD1);
+ had_write_register(AUD_HDMIW_INFOFR_v2, frame2.fr2_val);
+ had_write_register(AUD_HDMIW_INFOFR_v2, frame3.fr3_val);
+
+ /* program remaining DIP words with zero */
+ for (i = 0; i < HAD_MAX_DIP_WORDS-VALID_DIP_WORDS; i++)
+ had_write_register(AUD_HDMIW_INFOFR_v2, 0x0);
+
+ ctrl_state.ctrl_regx.dip_freq = 1;
+ ctrl_state.ctrl_regx.dip_en_sta = 1;
+ had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val);
+}
+
+/**
+ * snd_intelhad_prog_buffer - programs buffer
+ * address and length registers
+ *
+ * @substream:substream for which the prepare function is called
+ * @intelhaddata:substream private data
+ *
+ * This function programs ring buffer address and length into registers.
+ */
+int snd_intelhad_prog_buffer(struct snd_intelhad *intelhaddata,
+ int start, int end)
+{
+ u32 ring_buf_addr, ring_buf_size, period_bytes;
+ u8 i, num_periods;
+ struct snd_pcm_substream *substream;
+
+ substream = intelhaddata->stream_info.had_substream;
+ if (!substream) {
+ pr_err("substream is NULL\n");
+ dump_stack();
+ return 0;
+ }
+
+ ring_buf_addr = substream->runtime->dma_addr;
+ ring_buf_size = snd_pcm_lib_buffer_bytes(substream);
+ intelhaddata->stream_info.ring_buf_size = ring_buf_size;
+ period_bytes = frames_to_bytes(substream->runtime,
+ substream->runtime->period_size);
+ num_periods = substream->runtime->periods;
+
+ /*
+ * buffer addr should be 64 byte aligned, period bytes
+ * will be used to calculate addr offset
+ */
+ period_bytes &= ~0x3F;
+
+ /* Hardware supports MAX_PERIODS buffers */
+ if (end >= HAD_MAX_PERIODS)
+ return -EINVAL;
+
+ for (i = start; i <= end; i++) {
+ /* Program the buf registers with addr and len */
+ intelhaddata->buf_info[i].buf_addr = ring_buf_addr +
+ (i * period_bytes);
+ if (i < num_periods-1)
+ intelhaddata->buf_info[i].buf_size = period_bytes;
+ else
+ intelhaddata->buf_info[i].buf_size = ring_buf_size -
+ (period_bytes*i);
+
+ had_write_register(AUD_BUF_A_ADDR + (i * HAD_REG_WIDTH),
+ intelhaddata->buf_info[i].buf_addr |
+ BIT(0) | BIT(1));
+ had_write_register(AUD_BUF_A_LENGTH + (i * HAD_REG_WIDTH),
+ period_bytes);
+ intelhaddata->buf_info[i].is_valid = true;
+ }
+ pr_debug("%s:buf[%d-%d] addr=%#x and size=%d\n", __func__, start, end,
+ intelhaddata->buf_info[start].buf_addr,
+ intelhaddata->buf_info[start].buf_size);
+ intelhaddata->valid_buf_cnt = num_periods;
+ return 0;
+}
+
+inline int snd_intelhad_read_len(struct snd_intelhad *intelhaddata)
+{
+ int i, retval = 0;
+ u32 len[4];
+
+ for (i = 0; i < 4 ; i++) {
+ had_read_register(AUD_BUF_A_LENGTH + (i * HAD_REG_WIDTH),
+ &len[i]);
+ if (!len[i])
+ retval++;
+ }
+ if (retval != 1) {
+ for (i = 0; i < 4 ; i++)
+ pr_debug("buf[%d] size=%d\n", i, len[i]);
+ }
+
+ return retval;
+}
+
+/**
+ * snd_intelhad_prog_cts_v1 - Program HDMI audio CTS value
+ *
+ * @aud_samp_freq: sampling frequency of audio data
+ * @tmds: sampling frequency of the display data
+ * @n_param: N value, depends on aud_samp_freq
+ * @intelhaddata:substream private data
+ *
+ * Program CTS register based on the audio and display sampling frequency
+ */
+static void snd_intelhad_prog_cts_v1(u32 aud_samp_freq, u32 tmds, u32 n_param,
+ struct snd_intelhad *intelhaddata)
+{
+ u32 cts_val;
+ u64 dividend, divisor;
+
+ /* Calculate CTS according to HDMI 1.3a spec*/
+ dividend = (u64)tmds * n_param*1000;
+ divisor = 128 * aud_samp_freq;
+ cts_val = div64_u64(dividend, divisor);
+ pr_debug("TMDS value=%d, N value=%d, CTS Value=%d\n",
+ tmds, n_param, cts_val);
+ had_write_register(AUD_HDMI_CTS, (BIT(20) | cts_val));
+}
+
+/**
+ * snd_intelhad_prog_cts_v2 - Program HDMI audio CTS value
+ *
+ * @aud_samp_freq: sampling frequency of audio data
+ * @tmds: sampling frequency of the display data
+ * @n_param: N value, depends on aud_samp_freq
+ * @intelhaddata:substream private data
+ *
+ * Program CTS register based on the audio and display sampling frequency
+ */
+static void snd_intelhad_prog_cts_v2(u32 aud_samp_freq, u32 tmds, u32 n_param,
+ struct snd_intelhad *intelhaddata)
+{
+ u32 cts_val;
+ u64 dividend, divisor;
+
+ /* Calculate CTS according to HDMI 1.3a spec*/
+ dividend = (u64)tmds * n_param*1000;
+ divisor = 128 * aud_samp_freq;
+ cts_val = div64_u64(dividend, divisor);
+ pr_debug("TMDS value=%d, N value=%d, CTS Value=%d\n",
+ tmds, n_param, cts_val);
+ had_write_register(AUD_HDMI_CTS, (BIT(24) | cts_val));
+}
+
+static int had_calculate_n_value(u32 aud_samp_freq)
+{
+ s32 n_val;
+
+ /* Select N according to HDMI 1.3a spec*/
+ switch (aud_samp_freq) {
+ case AUD_SAMPLE_RATE_32:
+ n_val = 4096;
+ break;
+
+ case AUD_SAMPLE_RATE_44_1:
+ n_val = 6272;
+ break;
+
+ case AUD_SAMPLE_RATE_48:
+ n_val = 6144;
+ break;
+
+ case AUD_SAMPLE_RATE_88_2:
+ n_val = 12544;
+ break;
+
+ case AUD_SAMPLE_RATE_96:
+ n_val = 12288;
+ break;
+
+ case AUD_SAMPLE_RATE_176_4:
+ n_val = 25088;
+ break;
+
+ case HAD_MAX_RATE:
+ n_val = 24576;
+ break;
+
+ default:
+ n_val = -EINVAL;
+ break;
+ }
+ return n_val;
+}
+
+/**
+ * snd_intelhad_prog_n_v1 - Program HDMI audio N value
+ *
+ * @aud_samp_freq: sampling frequency of audio data
+ * @n_param: N value, depends on aud_samp_freq
+ * @intelhaddata:substream private data
+ *
+ * This function is called in the prepare callback.
+ * It programs based on the audio and display sampling frequency
+ */
+static int snd_intelhad_prog_n_v1(u32 aud_samp_freq, u32 *n_param,
+ struct snd_intelhad *intelhaddata)
+{
+ s32 n_val;
+
+ n_val = had_calculate_n_value(aud_samp_freq);
+
+ if (n_val < 0)
+ return n_val;
+
+ had_write_register(AUD_N_ENABLE, (BIT(20) | n_val));
+ *n_param = n_val;
+ return 0;
+}
+
+/**
+ * snd_intelhad_prog_n_v2 - Program HDMI audio N value
+ *
+ * @aud_samp_freq: sampling frequency of audio data
+ * @n_param: N value, depends on aud_samp_freq
+ * @intelhaddata:substream private data
+ *
+ * This function is called in the prepare callback.
+ * It programs based on the audio and display sampling frequency
+ */
+static int snd_intelhad_prog_n_v2(u32 aud_samp_freq, u32 *n_param,
+ struct snd_intelhad *intelhaddata)
+{
+ s32 n_val;
+
+ n_val = had_calculate_n_value(aud_samp_freq);
+
+ if (n_val < 0)
+ return n_val;
+
+ had_write_register(AUD_N_ENABLE, (BIT(24) | n_val));
+ *n_param = n_val;
+ return 0;
+}
+
+static void had_clear_underrun_intr_v1(struct snd_intelhad *intelhaddata)
+{
+ u32 hdmi_status, i = 0;
+
+ /* Handle Underrun interrupt within Audio Unit */
+ had_write_register(AUD_CONFIG, 0);
+ /* Reset buffer pointers */
+ had_write_register(AUD_HDMI_STATUS, 1);
+ had_write_register(AUD_HDMI_STATUS, 0);
+ /**
+ * The interrupt status 'sticky' bits might not be cleared by
+ * setting '1' to that bit once...
+ */
+ do { /* clear bit30, 31 AUD_HDMI_STATUS */
+ had_read_register(AUD_HDMI_STATUS, &hdmi_status);
+ pr_debug("HDMI status =0x%x\n", hdmi_status);
+ if (hdmi_status & AUD_CONFIG_MASK_UNDERRUN) {
+ i++;
+ hdmi_status &= (AUD_CONFIG_MASK_SRDBG |
+ AUD_CONFIG_MASK_FUNCRST);
+ hdmi_status |= ~AUD_CONFIG_MASK_UNDERRUN;
+ had_write_register(AUD_HDMI_STATUS, hdmi_status);
+ } else
+ break;
+ } while (i < MAX_CNT);
+ if (i >= MAX_CNT)
+ pr_err("Unable to clear UNDERRUN bits\n");
+}
+
+static void had_clear_underrun_intr_v2(struct snd_intelhad *intelhaddata)
+{
+ u32 hdmi_status, i = 0;
+
+ /* Handle Underrun interrupt within Audio Unit */
+ had_write_register(AUD_CONFIG, 0);
+ /* Reset buffer pointers */
+ had_write_register(AUD_HDMI_STATUS_v2, 1);
+ had_write_register(AUD_HDMI_STATUS_v2, 0);
+ /**
+ * The interrupt status 'sticky' bits might not be cleared by
+ * setting '1' to that bit once...
+ */
+ do { /* clear bit30, 31 AUD_HDMI_STATUS */
+ had_read_register(AUD_HDMI_STATUS_v2, &hdmi_status);
+ pr_debug("HDMI status =0x%x\n", hdmi_status);
+ if (hdmi_status & AUD_CONFIG_MASK_UNDERRUN) {
+ i++;
+ had_write_register(AUD_HDMI_STATUS_v2, hdmi_status);
+ } else
+ break;
+ } while (i < MAX_CNT);
+ if (i >= MAX_CNT)
+ pr_err("Unable to clear UNDERRUN bits\n");
+}
+
+/**
+* snd_intelhad_open - stream initializations are done here
+* @substream:substream for which the stream function is called
+*
+* This function is called whenever a PCM stream is opened
+*/
+static int snd_intelhad_open(struct snd_pcm_substream *substream)
+{
+ struct snd_intelhad *intelhaddata;
+ struct snd_pcm_runtime *runtime;
+ struct had_stream_pvt *stream;
+ struct had_pvt_data *had_stream;
+ int retval;
+
+ pr_debug("snd_intelhad_open called\n");
+ intelhaddata = snd_pcm_substream_chip(substream);
+ had_stream = intelhaddata->private_data;
+ runtime = substream->runtime;
+
+ pm_runtime_get(intelhaddata->dev);
+
+ if (had_get_hwstate(intelhaddata)) {
+ pr_err("%s: HDMI cable plugged-out\n", __func__);
+ retval = -ENODEV;
+ goto exit_put_handle;
+ }
+
+ /* Check, if device already in use */
+ if (runtime->private_data) {
+ pr_err("Device already in use\n");
+ retval = -EBUSY;
+ goto exit_put_handle;
+ }
+
+ /* set the runtime hw parameter with local snd_pcm_hardware struct */
+ runtime->hw = snd_intel_hadstream;
+
+ stream = kzalloc(sizeof(*stream), GFP_KERNEL);
+ if (!stream) {
+ retval = -ENOMEM;
+ goto exit_put_handle;
+ }
+ stream->stream_status = STREAM_INIT;
+ runtime->private_data = stream;
+
+ retval = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (retval < 0)
+ goto exit_err;
+
+ /* Make sure, that the period size is always aligned
+ * 64byte boundary
+ */
+ retval = snd_pcm_hw_constraint_step(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 64);
+ if (retval < 0) {
+ pr_err("%s:step_size=64 failed,err=%d\n", __func__, retval);
+ goto exit_err;
+ }
+
+ return retval;
+exit_err:
+ kfree(stream);
+exit_put_handle:
+ pm_runtime_put(intelhaddata->dev);
+ runtime->private_data = NULL;
+ return retval;
+}
+
+/**
+* had_period_elapsed - updates the hardware pointer status
+* @had_substream:substream for which the stream function is called
+*
+*/
+static void had_period_elapsed(void *had_substream)
+{
+ struct snd_pcm_substream *substream = had_substream;
+ struct had_stream_pvt *stream;
+
+ /* pr_debug("had_period_elapsed called\n"); */
+
+ if (!substream || !substream->runtime)
+ return;
+ stream = substream->runtime->private_data;
+ if (!stream)
+ return;
+
+ if (stream->stream_status != STREAM_RUNNING)
+ return;
+ snd_pcm_period_elapsed(substream);
+}
+
+/**
+* snd_intelhad_init_stream - internal function to initialize stream info
+* @substream:substream for which the stream function is called
+*
+*/
+static int snd_intelhad_init_stream(struct snd_pcm_substream *substream)
+{
+ struct snd_intelhad *intelhaddata = snd_pcm_substream_chip(substream);
+
+ pr_debug("snd_intelhad_init_stream called\n");
+
+ pr_debug("setting buffer ptr param\n");
+ intelhaddata->stream_info.period_elapsed = had_period_elapsed;
+ intelhaddata->stream_info.had_substream = substream;
+ intelhaddata->stream_info.buffer_ptr = 0;
+ intelhaddata->stream_info.buffer_rendered = 0;
+ intelhaddata->stream_info.sfreq = substream->runtime->rate;
+ return 0;
+}
+
+/**
+ * snd_intelhad_close- to free parameteres when stream is stopped
+ *
+ * @substream: substream for which the function is called
+ *
+ * This function is called by ALSA framework when stream is stopped
+ */
+static int snd_intelhad_close(struct snd_pcm_substream *substream)
+{
+ struct snd_intelhad *intelhaddata;
+ struct snd_pcm_runtime *runtime;
+
+ pr_debug("snd_intelhad_close called\n");
+
+ intelhaddata = snd_pcm_substream_chip(substream);
+ runtime = substream->runtime;
+
+ if (!runtime->private_data) {
+ pr_debug("close() might have called after failed open");
+ return 0;
+ }
+
+ intelhaddata->stream_info.buffer_rendered = 0;
+ intelhaddata->stream_info.buffer_ptr = 0;
+ intelhaddata->stream_info.str_id = 0;
+ intelhaddata->stream_info.had_substream = NULL;
+
+ /* Check if following drv_status modification is required - VA */
+ if (intelhaddata->drv_status != HAD_DRV_DISCONNECTED) {
+ intelhaddata->drv_status = HAD_DRV_CONNECTED;
+ pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_CONNECTED\n",
+ __func__, __LINE__);
+ }
+ kfree(runtime->private_data);
+ runtime->private_data = NULL;
+ pm_runtime_put(intelhaddata->dev);
+ return 0;
+}
+
+/**
+ * snd_intelhad_hw_params- to setup the hardware parameters
+ * like allocating the buffers
+ *
+ * @substream: substream for which the function is called
+ * @hw_params: hardware parameters
+ *
+ * This function is called by ALSA framework when hardware params are set
+ */
+static int snd_intelhad_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ unsigned long addr;
+ int pages, buf_size, retval;
+
+ pr_debug("snd_intelhad_hw_params called\n");
+
+ if (!hw_params)
+ return -EINVAL;
+
+ buf_size = params_buffer_bytes(hw_params);
+ retval = snd_pcm_lib_malloc_pages(substream, buf_size);
+ if (retval < 0)
+ return retval;
+ pr_debug("%s:allocated memory = %d\n", __func__, buf_size);
+ /* mark the pages as uncached region */
+ addr = (unsigned long) substream->runtime->dma_area;
+ pages = (substream->runtime->dma_bytes + PAGE_SIZE - 1) / PAGE_SIZE;
+ retval = set_memory_uc(addr, pages);
+ if (retval) {
+ pr_err("set_memory_uc failed.Error:%d\n", retval);
+ return retval;
+ }
+ memset(substream->runtime->dma_area, 0, buf_size);
+
+ return retval;
+}
+
+/**
+ * snd_intelhad_hw_free- to release the resources allocated during
+ * hardware params setup
+ *
+ * @substream: substream for which the function is called
+ *
+ * This function is called by ALSA framework before close callback.
+ *
+ */
+static int snd_intelhad_hw_free(struct snd_pcm_substream *substream)
+{
+ unsigned long addr;
+ u32 pages;
+
+ pr_debug("snd_intelhad_hw_free called\n");
+
+ /* mark back the pages as cached/writeback region before the free */
+ if (substream->runtime->dma_area != NULL) {
+ addr = (unsigned long) substream->runtime->dma_area;
+ pages = (substream->runtime->dma_bytes + PAGE_SIZE - 1) /
+ PAGE_SIZE;
+ set_memory_wb(addr, pages);
+ return snd_pcm_lib_free_pages(substream);
+ }
+ return 0;
+}
+
+/**
+* snd_intelhad_pcm_trigger - stream activities are handled here
+* @substream:substream for which the stream function is called
+* @cmd:the stream commamd thats requested from upper layer
+* This function is called whenever an a stream activity is invoked
+*/
+static int snd_intelhad_pcm_trigger(struct snd_pcm_substream *substream,
+ int cmd)
+{
+ int caps, retval = 0;
+ unsigned long flag_irq;
+ struct snd_intelhad *intelhaddata;
+ struct had_stream_pvt *stream;
+ struct had_pvt_data *had_stream;
+
+ pr_debug("snd_intelhad_pcm_trigger called\n");
+
+ intelhaddata = snd_pcm_substream_chip(substream);
+ stream = substream->runtime->private_data;
+ had_stream = intelhaddata->private_data;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ pr_debug("Trigger Start\n");
+
+ /* Disable local INTRs till register prgmng is done */
+ if (had_get_hwstate(intelhaddata)) {
+ pr_err("_START: HDMI cable plugged-out\n");
+ retval = -ENODEV;
+ break;
+ }
+ stream->stream_status = STREAM_RUNNING;
+
+ had_stream->stream_type = HAD_RUNNING_STREAM;
+
+ /* Enable Audio */
+ /*
+ * ToDo: Need to enable UNDERRUN interrupts as well
+ * caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE;
+ */
+ caps = HDMI_AUDIO_BUFFER_DONE;
+ retval = had_set_caps(HAD_SET_ENABLE_AUDIO_INT, &caps);
+ retval = had_set_caps(HAD_SET_ENABLE_AUDIO, NULL);
+ intelhaddata->ops->enable_audio(substream, 1);
+
+ pr_debug("Processed _Start\n");
+
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ pr_debug("Trigger Stop\n");
+ spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irq);
+ intelhaddata->stream_info.str_id = 0;
+ intelhaddata->curr_buf = 0;
+
+ /* Stop reporting BUFFER_DONE/UNDERRUN to above layers*/
+
+ had_stream->stream_type = HAD_INIT;
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irq);
+ /* Disable Audio */
+ /*
+ * ToDo: Need to disable UNDERRUN interrupts as well
+ * caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE;
+ */
+ caps = HDMI_AUDIO_BUFFER_DONE;
+ had_set_caps(HAD_SET_DISABLE_AUDIO_INT, &caps);
+ intelhaddata->ops->enable_audio(substream, 0);
+ /* Reset buffer pointers */
+ intelhaddata->ops->reset_audio(1);
+ intelhaddata->ops->reset_audio(0);
+ stream->stream_status = STREAM_DROPPED;
+ had_set_caps(HAD_SET_DISABLE_AUDIO, NULL);
+ break;
+
+ default:
+ retval = -EINVAL;
+ }
+ return retval;
+}
+
+/**
+* snd_intelhad_pcm_prepare- internal preparation before starting a stream
+*
+* @substream: substream for which the function is called
+*
+* This function is called when a stream is started for internal preparation.
+*/
+static int snd_intelhad_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ int retval;
+ u32 disp_samp_freq, n_param;
+ struct snd_intelhad *intelhaddata;
+ struct snd_pcm_runtime *runtime;
+ struct had_pvt_data *had_stream;
+
+ pr_debug("snd_intelhad_pcm_prepare called\n");
+
+ intelhaddata = snd_pcm_substream_chip(substream);
+ runtime = substream->runtime;
+ had_stream = intelhaddata->private_data;
+
+ if (had_get_hwstate(intelhaddata)) {
+ pr_err("%s: HDMI cable plugged-out\n", __func__);
+ retval = -ENODEV;
+ goto prep_end;
+ }
+
+ pr_debug("period_size=%d\n",
+ (int)frames_to_bytes(runtime, runtime->period_size));
+ pr_debug("periods=%d\n", runtime->periods);
+ pr_debug("buffer_size=%d\n", (int)snd_pcm_lib_buffer_bytes(substream));
+ pr_debug("rate=%d\n", runtime->rate);
+ pr_debug("channels=%d\n", runtime->channels);
+
+ if (intelhaddata->stream_info.str_id) {
+ pr_debug("_prepare is called for existing str_id#%d\n",
+ intelhaddata->stream_info.str_id);
+ retval = snd_intelhad_pcm_trigger(substream,
+ SNDRV_PCM_TRIGGER_STOP);
+ return retval;
+ }
+
+ retval = snd_intelhad_init_stream(substream);
+ if (retval)
+ goto prep_end;
+
+
+ /* Get N value in KHz */
+ retval = had_get_caps(HAD_GET_DISPLAY_RATE, &disp_samp_freq);
+ if (retval) {
+ pr_err("querying display sampling freq failed %#x\n", retval);
+ goto prep_end;
+ }
+
+ had_get_caps(HAD_GET_ELD, &intelhaddata->eeld);
+
+ retval = intelhaddata->ops->prog_n(substream->runtime->rate, &n_param,
+ intelhaddata);
+ if (retval) {
+ pr_err("programming N value failed %#x\n", retval);
+ goto prep_end;
+ }
+ intelhaddata->ops->prog_cts(substream->runtime->rate,
+ disp_samp_freq, n_param, intelhaddata);
+
+ intelhaddata->ops->prog_dip(substream, intelhaddata);
+
+ retval = intelhaddata->ops->audio_ctrl(substream, intelhaddata);
+
+ /* Prog buffer address */
+ retval = snd_intelhad_prog_buffer(intelhaddata,
+ HAD_BUF_TYPE_A, HAD_BUF_TYPE_D);
+
+ /*
+ * Program channel mapping in following order:
+ * FL, FR, C, LFE, RL, RR
+ */
+
+ had_write_register(AUD_BUF_CH_SWAP, SWAP_LFE_CENTER);
+
+prep_end:
+ return retval;
+}
+
+/**
+ * snd_intelhad_pcm_pointer- to send the current buffer pointerprocessed by hw
+ *
+ * @substream: substream for which the function is called
+ *
+ * This function is called by ALSA framework to get the current hw buffer ptr
+ * when a period is elapsed
+ */
+static snd_pcm_uframes_t snd_intelhad_pcm_pointer(
+ struct snd_pcm_substream *substream)
+{
+ struct snd_intelhad *intelhaddata;
+ u32 bytes_rendered = 0;
+ u32 t;
+ int buf_id;
+
+ /* pr_debug("snd_intelhad_pcm_pointer called\n"); */
+
+ intelhaddata = snd_pcm_substream_chip(substream);
+
+ if (intelhaddata->flag_underrun) {
+ intelhaddata->flag_underrun = 0;
+ return SNDRV_PCM_POS_XRUN;
+ }
+
+ /* Use a hw register to calculate sub-period position reports.
+ * This makes PulseAudio happier.
+ */
+
+ buf_id = intelhaddata->curr_buf % 4;
+ had_read_register(AUD_BUF_A_LENGTH + (buf_id * HAD_REG_WIDTH), &t);
+ if (t == 0) {
+ pr_debug("discovered buffer done for buf %d\n", buf_id);
+ /* had_process_buffer_done(intelhaddata); */
+ }
+ t = intelhaddata->buf_info[buf_id].buf_size - t;
+
+ if (intelhaddata->stream_info.buffer_rendered)
+ div_u64_rem(intelhaddata->stream_info.buffer_rendered,
+ intelhaddata->stream_info.ring_buf_size,
+ &(bytes_rendered));
+
+ intelhaddata->stream_info.buffer_ptr = bytes_to_frames(
+ substream->runtime,
+ bytes_rendered + t);
+ return intelhaddata->stream_info.buffer_ptr;
+}
+
+/**
+* snd_intelhad_pcm_mmap- mmaps a kernel buffer to user space for copying data
+*
+* @substream: substream for which the function is called
+* @vma: struct instance of memory VMM memory area
+*
+* This function is called by OS when a user space component
+* tries to get mmap memory from driver
+*/
+static int snd_intelhad_pcm_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *vma)
+{
+
+ pr_debug("snd_intelhad_pcm_mmap called\n");
+
+ pr_debug("entry with prot:%s\n", __func__);
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ return remap_pfn_range(vma, vma->vm_start,
+ substream->dma_buffer.addr >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot);
+}
+
+int hdmi_audio_mode_change(struct snd_pcm_substream *substream)
+{
+ int retval = 0;
+ u32 disp_samp_freq, n_param;
+ struct snd_intelhad *intelhaddata;
+
+ intelhaddata = snd_pcm_substream_chip(substream);
+
+ /* Disable Audio */
+ intelhaddata->ops->enable_audio(substream, 0);
+
+ /* Update CTS value */
+ retval = had_get_caps(HAD_GET_DISPLAY_RATE, &disp_samp_freq);
+ if (retval) {
+ pr_err("querying display sampling freq failed %#x\n", retval);
+ goto out;
+ }
+
+ retval = intelhaddata->ops->prog_n(substream->runtime->rate, &n_param,
+ intelhaddata);
+ if (retval) {
+ pr_err("programming N value failed %#x\n", retval);
+ goto out;
+ }
+ intelhaddata->ops->prog_cts(substream->runtime->rate,
+ disp_samp_freq, n_param, intelhaddata);
+
+ /* Enable Audio */
+ intelhaddata->ops->enable_audio(substream, 1);
+
+out:
+ return retval;
+}
+
+/*PCM operations structure and the calls back for the same */
+struct snd_pcm_ops snd_intelhad_playback_ops = {
+ .open = snd_intelhad_open,
+ .close = snd_intelhad_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_intelhad_hw_params,
+ .hw_free = snd_intelhad_hw_free,
+ .prepare = snd_intelhad_pcm_prepare,
+ .trigger = snd_intelhad_pcm_trigger,
+ .pointer = snd_intelhad_pcm_pointer,
+ .mmap = snd_intelhad_pcm_mmap,
+};
+
+/**
+ * snd_intelhad_create - to crete alsa card instance
+ *
+ * @intelhaddata: pointer to internal context
+ * @card: pointer to card
+ *
+ * This function is called when the hdmi cable is plugged in
+ */
+static int snd_intelhad_create(
+ struct snd_intelhad *intelhaddata,
+ struct snd_card *card)
+{
+ int retval;
+ static struct snd_device_ops ops = {
+ };
+
+ pr_debug("snd_intelhad_create called\n");
+
+ if (!intelhaddata)
+ return -EINVAL;
+
+ /* ALSA api to register the device */
+ retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, intelhaddata, &ops);
+ return retval;
+}
+/**
+ * snd_intelhad_pcm_free - to free the memory allocated
+ *
+ * @pcm: pointer to pcm instance
+ * This function is called when the device is removed
+ */
+static void snd_intelhad_pcm_free(struct snd_pcm *pcm)
+{
+ pr_debug("Freeing PCM preallocated pages\n");
+ snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static int had_iec958_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+ uinfo->count = 1;
+ return 0;
+}
+
+static int had_iec958_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_intelhad *intelhaddata = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.iec958.status[0] = (intelhaddata->aes_bits >> 0) & 0xff;
+ ucontrol->value.iec958.status[1] = (intelhaddata->aes_bits >> 8) & 0xff;
+ ucontrol->value.iec958.status[2] =
+ (intelhaddata->aes_bits >> 16) & 0xff;
+ ucontrol->value.iec958.status[3] =
+ (intelhaddata->aes_bits >> 24) & 0xff;
+ return 0;
+}
+static int had_iec958_mask_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.iec958.status[0] = 0xff;
+ ucontrol->value.iec958.status[1] = 0xff;
+ ucontrol->value.iec958.status[2] = 0xff;
+ ucontrol->value.iec958.status[3] = 0xff;
+ return 0;
+}
+static int had_iec958_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ unsigned int val;
+ struct snd_intelhad *intelhaddata = snd_kcontrol_chip(kcontrol);
+
+ pr_debug("entered had_iec958_put\n");
+ val = (ucontrol->value.iec958.status[0] << 0) |
+ (ucontrol->value.iec958.status[1] << 8) |
+ (ucontrol->value.iec958.status[2] << 16) |
+ (ucontrol->value.iec958.status[3] << 24);
+ if (intelhaddata->aes_bits != val) {
+ intelhaddata->aes_bits = val;
+ return 1;
+ }
+ return 1;
+}
+
+static struct snd_kcontrol_new had_control_iec958_mask = {
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),
+ .info = had_iec958_info, /* shared */
+ .get = had_iec958_mask_get,
+};
+
+static struct snd_kcontrol_new had_control_iec958 = {
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
+ .info = had_iec958_info,
+ .get = had_iec958_get,
+ .put = had_iec958_put
+};
+
+static struct snd_intel_had_interface had_interface = {
+ .name = "hdmi-audio",
+ .query = hdmi_audio_query,
+ .suspend = hdmi_audio_suspend,
+ .resume = hdmi_audio_resume,
+};
+
+static struct had_ops had_ops_v1 = {
+ .enable_audio = snd_intelhad_enable_audio_v1,
+ .reset_audio = snd_intelhad_reset_audio_v1,
+ .prog_n = snd_intelhad_prog_n_v1,
+ .prog_cts = snd_intelhad_prog_cts_v1,
+ .audio_ctrl = snd_intelhad_prog_audio_ctrl_v1,
+ .prog_dip = snd_intelhad_prog_dip_v1,
+ .handle_underrun = had_clear_underrun_intr_v1,
+};
+
+static struct had_ops had_ops_v2 = {
+ .enable_audio = snd_intelhad_enable_audio_v2,
+ .reset_audio = snd_intelhad_reset_audio_v2,
+ .prog_n = snd_intelhad_prog_n_v2,
+ .prog_cts = snd_intelhad_prog_cts_v2,
+ .audio_ctrl = snd_intelhad_prog_audio_ctrl_v2,
+ .prog_dip = snd_intelhad_prog_dip_v2,
+ .handle_underrun = had_clear_underrun_intr_v2,
+};
+/**
+ * hdmi_audio_probe - to create sound card instance for HDMI audio playabck
+ *
+ *@haddata: pointer to HAD private data
+ *@card_id: card for which probe is called
+ *
+ * This function is called when the hdmi cable is plugged in. This function
+ * creates and registers the sound card with ALSA
+ */
+int hdmi_audio_probe(void *deviceptr)
+{
+ int retval;
+ struct snd_pcm *pcm;
+ struct snd_card *card;
+ struct had_callback_ops ops_cb;
+ struct snd_intelhad *intelhaddata;
+ struct had_pvt_data *had_stream;
+ struct platform_device *devptr = deviceptr;
+
+ pr_debug("Enter %s\n", __func__);
+
+ pr_debug("hdmi_audio_probe dma_mask: %p\n", devptr->dev.dma_mask);
+
+ /* allocate memory for saving internal context and working */
+ intelhaddata = kzalloc(sizeof(*intelhaddata), GFP_KERNEL);
+ if (!intelhaddata)
+ return -ENOMEM;
+
+ had_stream = kzalloc(sizeof(*had_stream), GFP_KERNEL);
+ if (!had_stream) {
+ retval = -ENOMEM;
+ goto free_haddata;
+ }
+
+ had_data = intelhaddata;
+ ops_cb.intel_had_event_call_back = had_event_handler;
+
+ /* registering with display driver to get access to display APIs */
+
+ retval = mid_hdmi_audio_setup(
+ ops_cb.intel_had_event_call_back,
+ &(intelhaddata->reg_ops),
+ &(intelhaddata->query_ops));
+ if (retval) {
+ pr_err("querying display driver APIs failed %#x\n", retval);
+ goto free_hadstream;
+ }
+ mutex_lock(&had_mutex);
+ spin_lock_init(&intelhaddata->had_spinlock);
+ intelhaddata->drv_status = HAD_DRV_DISCONNECTED;
+ pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_DISCONNECTED\n",
+ __func__, __LINE__);
+
+ /* create a card instance with ALSA framework */
+ retval = snd_card_new(&devptr->dev, hdmi_card_index, hdmi_card_id,
+ THIS_MODULE, 0, &card);
+
+ if (retval)
+ goto unlock_mutex;
+ intelhaddata->card = card;
+ intelhaddata->card_id = hdmi_card_id;
+ intelhaddata->card_index = card->number;
+ intelhaddata->private_data = had_stream;
+ intelhaddata->flag_underrun = 0;
+ intelhaddata->aes_bits = SNDRV_PCM_DEFAULT_CON_SPDIF;
+ strncpy(card->driver, INTEL_HAD, strlen(INTEL_HAD));
+ strncpy(card->shortname, INTEL_HAD, strlen(INTEL_HAD));
+
+ retval = snd_pcm_new(card, INTEL_HAD, PCM_INDEX, MAX_PB_STREAMS,
+ MAX_CAP_STREAMS, &pcm);
+ if (retval)
+ goto err;
+
+ /* setup private data which can be retrieved when required */
+ pcm->private_data = intelhaddata;
+ pcm->private_free = snd_intelhad_pcm_free;
+ pcm->info_flags = 0;
+ strncpy(pcm->name, card->shortname, strlen(card->shortname));
+ /* setup the ops for palyabck */
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_intelhad_playback_ops);
+ /* allocate dma pages for ALSA stream operations
+ * memory allocated is based on size, not max value
+ * thus using same argument for max & size
+ */
+ retval = snd_pcm_lib_preallocate_pages_for_all(pcm,
+ SNDRV_DMA_TYPE_DEV, NULL,
+ HAD_MAX_BUFFER, HAD_MAX_BUFFER);
+
+ if (card->dev == NULL)
+ pr_debug("card->dev is NULL!!!!! Should not be this case\n");
+ else if (card->dev->dma_mask == NULL)
+ pr_debug("hdmi_audio_probe dma_mask is NULL!!!!!\n");
+ else
+ pr_debug("hdmi_audio_probe dma_mask is : %p\n",
+ card->dev->dma_mask);
+
+ if (retval)
+ goto err;
+
+ /* internal function call to register device with ALSA */
+ retval = snd_intelhad_create(intelhaddata, card);
+ if (retval)
+ goto err;
+
+ card->private_data = &intelhaddata;
+ retval = snd_card_register(card);
+ if (retval)
+ goto err;
+
+ /* IEC958 controls */
+ retval = snd_ctl_add(card, snd_ctl_new1(&had_control_iec958_mask,
+ intelhaddata));
+ if (retval < 0)
+ goto err;
+ retval = snd_ctl_add(card, snd_ctl_new1(&had_control_iec958,
+ intelhaddata));
+ if (retval < 0)
+ goto err;
+
+ init_channel_allocations();
+
+ /* Register channel map controls */
+ retval = had_register_chmap_ctls(intelhaddata, pcm);
+ if (retval < 0)
+ goto err;
+
+ intelhaddata->dev = &devptr->dev;
+ pm_runtime_set_active(intelhaddata->dev);
+ pm_runtime_enable(intelhaddata->dev);
+
+ mutex_unlock(&had_mutex);
+ retval = mid_hdmi_audio_register(&had_interface, intelhaddata);
+ if (retval) {
+ pr_err("registering with display driver failed %#x\n", retval);
+ snd_card_free(card);
+ goto free_hadstream;
+ }
+
+ intelhaddata->hw_silence = 1;
+ had_ops_v1 = had_ops_v1; /* unused */
+ intelhaddata->ops = &had_ops_v2;
+
+ return retval;
+err:
+ snd_card_free(card);
+unlock_mutex:
+ mutex_unlock(&had_mutex);
+free_hadstream:
+ kfree(had_stream);
+ pm_runtime_disable(intelhaddata->dev);
+ intelhaddata->dev = NULL;
+free_haddata:
+ kfree(intelhaddata);
+ intelhaddata = NULL;
+ pr_err("Error returned from %s api %#x\n", __func__, retval);
+ return retval;
+}
+
+/**
+ * hdmi_audio_remove - removes the alsa card
+ *
+ *@haddata: pointer to HAD private data
+ *
+ * This function is called when the hdmi cable is un-plugged. This function
+ * free the sound card.
+ */
+int hdmi_audio_remove(void *pdevptr)
+{
+ struct snd_intelhad *intelhaddata = had_data;
+ int caps;
+
+ pr_debug("Enter %s\n", __func__);
+
+ if (!intelhaddata)
+ return 0;
+
+ if (intelhaddata->drv_status != HAD_DRV_DISCONNECTED) {
+ caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE;
+ had_set_caps(HAD_SET_DISABLE_AUDIO_INT, &caps);
+ had_set_caps(HAD_SET_DISABLE_AUDIO, NULL);
+ }
+ snd_card_free(intelhaddata->card);
+ kfree(intelhaddata->private_data);
+ kfree(intelhaddata);
+ return 0;
+}
+
+MODULE_AUTHOR("Sailaja Bandarupalli <sailaja.bandarupalli@intel.com>");
+MODULE_AUTHOR("Ramesh Babu K V <ramesh.babu@intel.com>");
+MODULE_AUTHOR("Vaibhav Agarwal <vaibhav.agarwal@intel.com>");
+MODULE_AUTHOR("Jerome Anand <jerome.anand@intel.com>");
+MODULE_DESCRIPTION("Intel HDMI Audio driver");
+MODULE_LICENSE("GPL v2");
+MODULE_SUPPORTED_DEVICE("{Intel,Intel_HAD}");
diff --git a/sound/x86/intel_hdmi_audio.h b/sound/x86/intel_hdmi_audio.h
new file mode 100644
index 0000000..1ef25b6
--- /dev/null
+++ b/sound/x86/intel_hdmi_audio.h
@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2016 Intel Corporation
+ * Authors: Sailaja Bandarupalli <sailaja.bandarupalli@intel.com>
+ * Ramesh Babu K V <ramesh.babu@intel.com>
+ * Vaibhav Agarwal <vaibhav.agarwal@intel.com>
+ * Jerome Anand <jerome.anand@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files
+ * (the "Software"), to deal in the Software without restriction,
+ * including without limitation the rights to use, copy, modify, merge,
+ * publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef _INTEL_HDMI_AUDIO_H_
+#define _INTEL_HDMI_AUDIO_H_
+
+#include <linux/types.h>
+#include <sound/initval.h>
+#include <linux/version.h>
+#include <linux/pm_runtime.h>
+#include <sound/asoundef.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include "intel_hdmi_lpe_audio.h"
+
+#define PCM_INDEX 0
+#define MAX_PB_STREAMS 1
+#define MAX_CAP_STREAMS 0
+#define HDMI_AUDIO_DRIVER "hdmi-audio"
+
+#define INFO_FRAME_WORD1 0x000a0184
+#define FIFO_THRESHOLD 0xFE
+#define DMA_FIFO_THRESHOLD 0x7
+#define BYTES_PER_WORD 0x4
+
+/* Sampling rate as per IEC60958 Ver 3 */
+#define CH_STATUS_MAP_32KHZ 0x3
+#define CH_STATUS_MAP_44KHZ 0x0
+#define CH_STATUS_MAP_48KHZ 0x2
+#define CH_STATUS_MAP_88KHZ 0x8
+#define CH_STATUS_MAP_96KHZ 0xA
+#define CH_STATUS_MAP_176KHZ 0xC
+#define CH_STATUS_MAP_192KHZ 0xE
+
+#define MAX_SMPL_WIDTH_20 0x0
+#define MAX_SMPL_WIDTH_24 0x1
+#define SMPL_WIDTH_16BITS 0x1
+#define SMPL_WIDTH_24BITS 0x5
+#define CHANNEL_ALLOCATION 0x1F
+#define MASK_BYTE0 0x000000FF
+#define VALID_DIP_WORDS 3
+#define LAYOUT0 0
+#define LAYOUT1 1
+#define SWAP_LFE_CENTER 0x00fac4c8
+#define AUD_CONFIG_CH_MASK_V2 0x70
+
+struct pcm_stream_info {
+ int str_id;
+ void *had_substream;
+ void (*period_elapsed)(void *had_substream);
+ u32 buffer_ptr;
+ u64 buffer_rendered;
+ u32 ring_buf_size;
+ int sfreq;
+};
+
+struct ring_buf_info {
+ uint32_t buf_addr;
+ uint32_t buf_size;
+ uint8_t is_valid;
+};
+
+struct had_stream_pvt {
+ enum had_stream_status stream_status;
+ int stream_ops;
+ ssize_t dbg_cum_bytes;
+};
+
+struct had_pvt_data {
+ enum had_status_stream stream_type;
+};
+
+struct had_callback_ops {
+ had_event_call_back intel_had_event_call_back;
+};
+
+/**
+ * struct snd_intelhad - intelhad driver structure
+ *
+ * @card: ptr to hold card details
+ * @card_index: sound card index
+ * @card_id: detected sound card id
+ * @reg_ops: register operations to program registers
+ * @query_ops: caps call backs for get/set operations
+ * @drv_status: driver status
+ * @buf_info: ring buffer info
+ * @stream_info: stream information
+ * @eeld: holds EELD info
+ * @curr_buf: pointer to hold current active ring buf
+ * @valid_buf_cnt: ring buffer count for stream
+ * @had_spinlock: driver lock
+ * @aes_bits: IEC958 status bits
+ * @buff_done: id of current buffer done intr
+ * @dev: platoform device handle
+ * @kctl: holds kctl ptrs used for channel map
+ * @chmap: holds channel map info
+ * @audio_reg_base: hdmi audio register base offset
+ * @hw_silence: flag indicates SoC support for HW silence/Keep alive
+ * @ops: holds ops functions based on platform
+ */
+struct snd_intelhad {
+ struct snd_card *card;
+ int card_index;
+ char *card_id;
+ struct hdmi_audio_registers_ops reg_ops;
+ struct hdmi_audio_query_set_ops query_ops;
+ enum had_drv_status drv_status;
+ struct ring_buf_info buf_info[HAD_NUM_OF_RING_BUFS];
+ struct pcm_stream_info stream_info;
+ union otm_hdmi_eld_t eeld;
+ enum intel_had_aud_buf_type curr_buf;
+ int valid_buf_cnt;
+ unsigned int aes_bits;
+ int flag_underrun;
+ struct had_pvt_data *private_data;
+ spinlock_t had_spinlock;
+ enum intel_had_aud_buf_type buff_done;
+ struct device *dev;
+ struct snd_kcontrol *kctl;
+ struct snd_pcm_chmap *chmap;
+ unsigned int *audio_reg_base;
+ unsigned int audio_cfg_offset;
+ bool hw_silence;
+ struct had_ops *ops;
+};
+
+struct had_ops {
+ void (*enable_audio)(struct snd_pcm_substream *substream,
+ u8 enable);
+ void (*reset_audio)(u8 reset);
+ int (*prog_n)(u32 aud_samp_freq, u32 *n_param,
+ struct snd_intelhad *intelhaddata);
+ void (*prog_cts)(u32 aud_samp_freq, u32 tmds, u32 n_param,
+ struct snd_intelhad *intelhaddata);
+ int (*audio_ctrl)(struct snd_pcm_substream *substream,
+ struct snd_intelhad *intelhaddata);
+ void (*prog_dip)(struct snd_pcm_substream *substream,
+ struct snd_intelhad *intelhaddata);
+ void (*handle_underrun)(struct snd_intelhad *intelhaddata);
+};
+
+
+int had_event_handler(enum had_event_type event_type, void *data);
+
+int hdmi_audio_query(void *drv_data, struct hdmi_audio_event event);
+int hdmi_audio_suspend(void *drv_data, struct hdmi_audio_event event);
+int hdmi_audio_resume(void *drv_data);
+int hdmi_audio_mode_change(struct snd_pcm_substream *substream);
+extern struct snd_pcm_ops snd_intelhad_playback_ops;
+
+int snd_intelhad_init_audio_ctrl(struct snd_pcm_substream *substream,
+ struct snd_intelhad *intelhaddata,
+ int flag_silence);
+int snd_intelhad_prog_buffer(struct snd_intelhad *intelhaddata,
+ int start, int end);
+int snd_intelhad_invd_buffer(int start, int end);
+inline int snd_intelhad_read_len(struct snd_intelhad *intelhaddata);
+void had_build_channel_allocation_map(struct snd_intelhad *intelhaddata);
+
+/* Register access functions */
+inline int had_get_hwstate(struct snd_intelhad *intelhaddata);
+inline int had_get_caps(enum had_caps_list query_element,
+ void *capabilties);
+inline int had_set_caps(enum had_caps_list set_element,
+ void *capabilties);
+inline int had_read_register(uint32_t reg_addr, uint32_t *data);
+inline int had_write_register(uint32_t reg_addr, uint32_t data);
+inline int had_read_modify(uint32_t reg_addr, uint32_t data,
+ uint32_t mask);
+
+/**/
+int hdmi_audio_probe(void *devptr);
+int hdmi_audio_remove(void *pdev);
+
+#endif /* _INTEL_HDMI_AUDIO_ */
diff --git a/sound/x86/intel_hdmi_audio_if.c b/sound/x86/intel_hdmi_audio_if.c
new file mode 100644
index 0000000..c650ba4
--- /dev/null
+++ b/sound/x86/intel_hdmi_audio_if.c
@@ -0,0 +1,551 @@
+/*
+ * intel_hdmi_audio_if.c - Intel HDMI audio driver for MID
+ *
+ * Copyright (C) 2016 Intel Corp
+ * Authors: Sailaja Bandarupalli <sailaja.bandarupalli@intel.com>
+ * Ramesh Babu K V <ramesh.babu@intel.com>
+ * Vaibhav Agarwal <vaibhav.agarwal@intel.com>
+ * Jerome Anand <jerome.anand@intel.com>
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ * ALSA driver for Intel MID HDMI audio controller. This file contains
+ * interface functions exposed to HDMI Display driver and code to register
+ * with ALSA framework..
+ */
+
+#define pr_fmt(fmt) "had: " fmt
+
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/slab.h>
+#include <sound/pcm.h>
+#include <sound/core.h>
+#include "intel_hdmi_audio.h"
+#include "intel_hdmi_lpe_audio.h"
+
+/**
+ * hdmi_audio_query - hdmi audio query function
+ *
+ *@haddata: pointer to HAD private data
+ *@event: audio event for which this method is invoked
+ *
+ * This function is called by client driver to query the
+ * hdmi audio.
+ */
+int hdmi_audio_query(void *haddata, struct hdmi_audio_event event)
+{
+ struct snd_pcm_substream *substream = NULL;
+ struct had_pvt_data *had_stream;
+ unsigned long flag_irqs;
+ struct snd_intelhad *intelhaddata = (struct snd_intelhad *)haddata;
+
+ if (intelhaddata->stream_info.had_substream)
+ substream = intelhaddata->stream_info.had_substream;
+ had_stream = intelhaddata->private_data;
+ switch (event.type) {
+ case HAD_EVENT_QUERY_IS_AUDIO_BUSY:
+ spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs);
+
+ if ((had_stream->stream_type == HAD_RUNNING_STREAM) ||
+ substream) {
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock,
+ flag_irqs);
+ pr_debug("Audio stream active\n");
+ return -EBUSY;
+ }
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ break;
+
+ case HAD_EVENT_QUERY_IS_AUDIO_SUSPENDED:
+ spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs);
+ if (intelhaddata->drv_status == HAD_DRV_SUSPENDED) {
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock,
+ flag_irqs);
+ pr_debug("Audio is suspended\n");
+ return 1;
+ }
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ break;
+
+ default:
+ pr_debug("error un-handled event !!\n");
+ return -EINVAL;
+ break;
+
+ }
+
+ return 0;
+}
+
+/**
+ * hdmi_audio_suspend - power management suspend function
+ *
+ *@haddata: pointer to HAD private data
+ *@event: pm event for which this method is invoked
+ *
+ * This function is called by client driver to suspend the
+ * hdmi audio.
+ */
+int hdmi_audio_suspend(void *haddata, struct hdmi_audio_event event)
+{
+ int caps, retval = 0;
+ struct had_pvt_data *had_stream;
+ unsigned long flag_irqs;
+ struct snd_pcm_substream *substream;
+ struct snd_intelhad *intelhaddata = (struct snd_intelhad *)haddata;
+
+ pr_debug("Enter:%s\n", __func__);
+
+ had_stream = intelhaddata->private_data;
+ substream = intelhaddata->stream_info.had_substream;
+
+ if (intelhaddata->dev->power.runtime_status != RPM_SUSPENDED) {
+ pr_err("audio stream is active\n");
+ return -EAGAIN;
+ }
+
+
+ spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs);
+ if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) {
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ pr_debug("had not connected\n");
+ return retval;
+ }
+
+ if (intelhaddata->drv_status == HAD_DRV_SUSPENDED) {
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ pr_debug("had already suspended\n");
+ return retval;
+ }
+
+ intelhaddata->drv_status = HAD_DRV_SUSPENDED;
+ pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_SUSPENDED\n",
+ __func__, __LINE__);
+
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ /*
+ * ToDo: Need to disable UNDERRUN interrupts as well
+ * caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE;
+ */
+ caps = HDMI_AUDIO_BUFFER_DONE;
+ had_set_caps(HAD_SET_DISABLE_AUDIO_INT, &caps);
+ had_set_caps(HAD_SET_DISABLE_AUDIO, NULL);
+ pr_debug("Exit:%s", __func__);
+ return retval;
+}
+
+/**
+ * hdmi_audio_resume - power management resume function
+ *
+ *@haddata: pointer to HAD private data
+ *
+ * This function is called by client driver to resume the
+ * hdmi audio.
+ */
+int hdmi_audio_resume(void *haddata)
+{
+ int caps, retval = 0;
+ struct snd_intelhad *intelhaddata = (struct snd_intelhad *)haddata;
+ unsigned long flag_irqs;
+
+ pr_debug("Enter:%s\n", __func__);
+
+ spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs);
+ if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) {
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ pr_debug("had not connected\n");
+ return 0;
+ }
+
+ if (intelhaddata->drv_status != HAD_DRV_SUSPENDED) {
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ pr_err("had is not in suspended state\n");
+ return 0;
+ }
+
+ if (had_get_hwstate(intelhaddata)) {
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ pr_err("Failed to resume. Device not accessible\n");
+ return -ENODEV;
+ }
+
+ intelhaddata->drv_status = HAD_DRV_CONNECTED;
+ pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_DISCONNECTED\n",
+ __func__, __LINE__);
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ /*
+ * ToDo: Need to enable UNDERRUN interrupts as well
+ * caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE;
+ */
+ caps = HDMI_AUDIO_BUFFER_DONE;
+ retval = had_set_caps(HAD_SET_ENABLE_AUDIO_INT, &caps);
+ retval = had_set_caps(HAD_SET_ENABLE_AUDIO, NULL);
+ pr_debug("Exit:%s", __func__);
+ return retval;
+}
+
+static inline int had_chk_intrmiss(struct snd_intelhad *intelhaddata,
+ enum intel_had_aud_buf_type buf_id)
+{
+ int i, intr_count = 0;
+ enum intel_had_aud_buf_type buff_done;
+ u32 buf_size, buf_addr;
+ struct had_pvt_data *had_stream;
+ unsigned long flag_irqs;
+
+ had_stream = intelhaddata->private_data;
+
+ buff_done = buf_id;
+
+ intr_count = snd_intelhad_read_len(intelhaddata);
+ if (intr_count > 1) {
+ /* In case of active playback */
+ pr_err("Driver detected %d missed buffer done interrupt(s)!!!!\n",
+ (intr_count - 1));
+ if (intr_count > 3)
+ return intr_count;
+
+ buf_id += (intr_count - 1);
+ /* Reprogram registers*/
+ for (i = buff_done; i < buf_id; i++) {
+ int j = i % 4;
+
+ buf_size = intelhaddata->buf_info[j].buf_size;
+ buf_addr = intelhaddata->buf_info[j].buf_addr;
+ had_write_register(AUD_BUF_A_LENGTH +
+ (j * HAD_REG_WIDTH), buf_size);
+ had_write_register(
+ AUD_BUF_A_ADDR+(j * HAD_REG_WIDTH),
+ (buf_addr | BIT(0) | BIT(1)));
+ }
+ buf_id = buf_id % 4;
+ spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs);
+ intelhaddata->buff_done = buf_id;
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ }
+
+ return intr_count;
+}
+
+int had_process_buffer_done(struct snd_intelhad *intelhaddata)
+{
+ int retval = 0;
+ u32 len = 1;
+ enum intel_had_aud_buf_type buf_id;
+ enum intel_had_aud_buf_type buff_done;
+ struct pcm_stream_info *stream;
+ u32 buf_size;
+ struct had_pvt_data *had_stream;
+ int intr_count;
+ enum had_status_stream stream_type;
+ unsigned long flag_irqs;
+
+ had_stream = intelhaddata->private_data;
+ stream = &intelhaddata->stream_info;
+ intr_count = 1;
+
+ spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs);
+ if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) {
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ pr_err("%s:Device already disconnected\n", __func__);
+ return retval;
+ }
+ buf_id = intelhaddata->curr_buf;
+ intelhaddata->buff_done = buf_id;
+ buff_done = intelhaddata->buff_done;
+ buf_size = intelhaddata->buf_info[buf_id].buf_size;
+ stream_type = had_stream->stream_type;
+
+ pr_debug("Enter:%s buf_id=%d\n", __func__, buf_id);
+
+ /* Every debug statement has an implication
+ * of ~5msec. Thus, avoid having >3 debug statements
+ * for each buffer_done handling.
+ */
+
+ /* Check for any intr_miss in case of active playback */
+ if (had_stream->stream_type == HAD_RUNNING_STREAM) {
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ intr_count = had_chk_intrmiss(intelhaddata, buf_id);
+ if (!intr_count || (intr_count > 3)) {
+ pr_err("HAD SW state in non-recoverable!!! mode\n");
+ pr_err("Already played stale data\n");
+ return retval;
+ }
+ buf_id += (intr_count - 1);
+ buf_id = buf_id % 4;
+ spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs);
+ }
+
+ intelhaddata->buf_info[buf_id].is_valid = true;
+ if (intelhaddata->valid_buf_cnt-1 == buf_id) {
+ if (had_stream->stream_type >= HAD_RUNNING_STREAM)
+ intelhaddata->curr_buf = HAD_BUF_TYPE_A;
+ } else
+ intelhaddata->curr_buf = buf_id + 1;
+
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+
+ if (had_get_hwstate(intelhaddata)) {
+ pr_err("HDMI cable plugged-out\n");
+ return retval;
+ }
+
+ /*Reprogram the registers with addr and length*/
+ had_write_register(AUD_BUF_A_LENGTH +
+ (buf_id * HAD_REG_WIDTH), buf_size);
+ had_write_register(AUD_BUF_A_ADDR+(buf_id * HAD_REG_WIDTH),
+ intelhaddata->buf_info[buf_id].buf_addr|
+ BIT(0) | BIT(1));
+
+ had_read_register(AUD_BUF_A_LENGTH + (buf_id * HAD_REG_WIDTH),
+ &len);
+ pr_debug("%s:Enabled buf[%d]\n", __func__, buf_id);
+
+ /* In case of actual data,
+ * report buffer_done to above ALSA layer
+ */
+ buf_size = intelhaddata->buf_info[buf_id].buf_size;
+ if (stream_type >= HAD_RUNNING_STREAM) {
+ intelhaddata->stream_info.buffer_rendered +=
+ (intr_count * buf_size);
+ stream->period_elapsed(stream->had_substream);
+ }
+
+ return retval;
+}
+
+int had_process_buffer_underrun(struct snd_intelhad *intelhaddata)
+{
+ int retval = 0;
+ enum intel_had_aud_buf_type buf_id;
+ struct pcm_stream_info *stream;
+ struct had_pvt_data *had_stream;
+ enum had_status_stream stream_type;
+ unsigned long flag_irqs;
+ int drv_status;
+
+ had_stream = intelhaddata->private_data;
+ stream = &intelhaddata->stream_info;
+
+ spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs);
+ buf_id = intelhaddata->curr_buf;
+ stream_type = had_stream->stream_type;
+ intelhaddata->buff_done = buf_id;
+ drv_status = intelhaddata->drv_status;
+ if (stream_type == HAD_RUNNING_STREAM)
+ intelhaddata->curr_buf = HAD_BUF_TYPE_A;
+
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+
+ pr_debug("Enter:%s buf_id=%d, stream_type=%d\n",
+ __func__, buf_id, stream_type);
+
+ intelhaddata->ops->handle_underrun(intelhaddata);
+
+ if (drv_status == HAD_DRV_DISCONNECTED) {
+ pr_err("%s:Device already disconnected\n", __func__);
+ return retval;
+ }
+
+ if (stream_type == HAD_RUNNING_STREAM) {
+ /* Report UNDERRUN error to above layers */
+ intelhaddata->flag_underrun = 1;
+ stream->period_elapsed(stream->had_substream);
+ }
+
+ return retval;
+}
+
+int had_process_hot_plug(struct snd_intelhad *intelhaddata)
+{
+ int retval = 0;
+ enum intel_had_aud_buf_type buf_id;
+ struct snd_pcm_substream *substream;
+ struct had_pvt_data *had_stream;
+ unsigned long flag_irqs;
+
+ pr_debug("Enter:%s\n", __func__);
+
+ substream = intelhaddata->stream_info.had_substream;
+ had_stream = intelhaddata->private_data;
+
+ spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs);
+ if (intelhaddata->drv_status == HAD_DRV_CONNECTED) {
+ pr_debug("Device already connected\n");
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ return retval;
+ }
+ buf_id = intelhaddata->curr_buf;
+ intelhaddata->buff_done = buf_id;
+ intelhaddata->drv_status = HAD_DRV_CONNECTED;
+ pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_CONNECTED\n",
+ __func__, __LINE__);
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+
+ pr_debug("Processing HOT_PLUG, buf_id = %d\n", buf_id);
+
+ /* Query display driver for audio register base */
+ if (intelhaddata->reg_ops.hdmi_audio_get_register_base(
+ &intelhaddata->audio_reg_base,
+ &intelhaddata->audio_cfg_offset)) {
+ pr_err("Unable to get audio reg base from Display driver\n");
+ goto err;
+ }
+
+ if (intelhaddata->audio_reg_base == NULL) {
+ pr_err("audio reg base value is NULL\n");
+ goto err;
+ }
+
+ pr_debug("%s audio_reg_base = 0x%p\n", __func__,
+ intelhaddata->audio_reg_base);
+
+ /* Safety check */
+ if (substream) {
+ pr_debug("There should not be active PB from ALSA\n");
+ pr_debug("Signifies, cable is plugged-in even before\n");
+ pr_debug("processing snd_pcm_disconnect\n");
+ /* Set runtime->state to hw_params done */
+ snd_pcm_stop(substream, SNDRV_PCM_STATE_SETUP);
+ }
+
+ had_build_channel_allocation_map(intelhaddata);
+
+ return retval;
+
+err:
+ pm_runtime_disable(intelhaddata->dev);
+ intelhaddata->dev = NULL;
+ return retval;
+}
+
+int had_process_hot_unplug(struct snd_intelhad *intelhaddata)
+{
+ int caps, retval = 0;
+ enum intel_had_aud_buf_type buf_id;
+ struct had_pvt_data *had_stream;
+ unsigned long flag_irqs;
+
+ pr_debug("Enter:%s\n", __func__);
+
+ had_stream = intelhaddata->private_data;
+ buf_id = intelhaddata->curr_buf;
+
+ spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs);
+
+ if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) {
+ pr_debug("Device already disconnected\n");
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ return retval;
+
+ } else {
+ /* Disable Audio */
+ caps = HDMI_AUDIO_BUFFER_DONE;
+ retval = had_set_caps(HAD_SET_DISABLE_AUDIO_INT, &caps);
+ retval = had_set_caps(HAD_SET_DISABLE_AUDIO, NULL);
+ intelhaddata->ops->enable_audio(
+ intelhaddata->stream_info.had_substream, 0);
+ }
+
+ intelhaddata->drv_status = HAD_DRV_DISCONNECTED;
+ pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_DISCONNECTED\n",
+ __func__, __LINE__);
+
+ /* Report to above ALSA layer */
+ if (intelhaddata->stream_info.had_substream != NULL) {
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ pr_debug("%s: unlock -> sending pcm_stop -> lock\n", __func__);
+ snd_pcm_stop(intelhaddata->stream_info.had_substream,
+ SNDRV_PCM_STATE_DISCONNECTED);
+ spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs);
+ }
+
+ had_stream->stream_type = HAD_INIT;
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ kfree(intelhaddata->chmap->chmap);
+ intelhaddata->chmap->chmap = NULL;
+ intelhaddata->audio_reg_base = NULL;
+ pr_debug("%s: unlocked -> returned\n", __func__);
+
+ return retval;
+}
+
+/**
+ * had_event_handler - Call back function to handle events
+ *
+ * @event_type: Event type to handle
+ * @data: data related to the event_type
+ *
+ * This function is invoked to handle HDMI events from client driver.
+ */
+int had_event_handler(enum had_event_type event_type, void *data)
+{
+ int retval = 0;
+ struct snd_intelhad *intelhaddata = data;
+ enum intel_had_aud_buf_type buf_id;
+ struct snd_pcm_substream *substream;
+ struct had_pvt_data *had_stream;
+ unsigned long flag_irqs;
+
+ buf_id = intelhaddata->curr_buf;
+ had_stream = intelhaddata->private_data;
+
+ /* Switching to a function can drop atomicity even in INTR context.
+ * Thus, a big lock is acquired to maintain atomicity.
+ * This can be optimized later.
+ * Currently, only buffer_done/_underrun executes in INTR context.
+ * Also, locking is implemented separately to avoid real contention
+ * of data(struct intelhaddata) between IRQ/SOFT_IRQ/PROCESS context.
+ */
+ substream = intelhaddata->stream_info.had_substream;
+ switch (event_type) {
+ case HAD_EVENT_AUDIO_BUFFER_DONE:
+ retval = had_process_buffer_done(intelhaddata);
+ break;
+
+ case HAD_EVENT_AUDIO_BUFFER_UNDERRUN:
+ retval = had_process_buffer_underrun(intelhaddata);
+ break;
+
+ case HAD_EVENT_HOT_PLUG:
+ retval = had_process_hot_plug(intelhaddata);
+ break;
+
+ case HAD_EVENT_HOT_UNPLUG:
+ retval = had_process_hot_unplug(intelhaddata);
+ break;
+
+ case HAD_EVENT_MODE_CHANGING:
+ pr_debug(" called _event_handler with _MODE_CHANGE event\n");
+ /* Process only if stream is active & cable Plugged-in */
+ spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs);
+ if (intelhaddata->drv_status >= HAD_DRV_DISCONNECTED) {
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock,
+ flag_irqs);
+ break;
+ }
+ spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs);
+ if ((had_stream->stream_type == HAD_RUNNING_STREAM)
+ && substream)
+ retval = hdmi_audio_mode_change(substream);
+ break;
+
+ default:
+ pr_debug("error un-handled event !!\n");
+ retval = -EINVAL;
+ break;
+
+ }
+ return retval;
+}
diff --git a/sound/x86/intel_hdmi_lpe_audio.c b/sound/x86/intel_hdmi_lpe_audio.c
index c2ebce1..cf177e9 100644
--- a/sound/x86/intel_hdmi_lpe_audio.c
+++ b/sound/x86/intel_hdmi_lpe_audio.c
@@ -34,6 +34,7 @@
#include <sound/initval.h>
#include <drm/intel_lpe_audio.h>
#include "intel_hdmi_lpe_audio.h"
+#include "intel_hdmi_audio.h"
/* globals*/
struct platform_device *hlpe_pdev;
@@ -453,9 +454,9 @@ static void notify_audio_lpe(void *audio_ptr)
/**
* hdmi_lpe_audio_probe - start bridge with i915
*
- * This function is called when the i915 driver creates the hdmi-lpe-audio
- * platform device. Card creation is deferred until a hot plug event is
- * received
+ * This function is called when the i915 driver creates the
+ * hdmi-lpe-audio platform device. Card creation is deferred until a
+ * hot plug event is received
*/
static int hdmi_lpe_audio_probe(struct platform_device *pdev)
{
@@ -497,8 +498,8 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev)
(unsigned int)res_mmio->start, (unsigned int)res_mmio->end);
mmio_start = ioremap_nocache(res_mmio->start,
- (size_t)((res_mmio->end - res_mmio->start)
- + 1));
+ (size_t)((res_mmio->end -
+ res_mmio->start) + 1));
if (!mmio_start) {
dev_err(&hlpe_pdev->dev, "Could not get ioremap\n");
return -EACCES;
@@ -548,11 +549,11 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ctx);
+ ret = hdmi_audio_probe((void *)pdev);
dev_dbg(&hlpe_pdev->dev, "hdmi lpe audio: setting pin eld notify callback\n");
spin_lock_irqsave(&pdata->lpe_audio_slock, flag_irq);
pdata->notify_audio_lpe = notify_audio_lpe;
-
if (pdata->notify_pending) {
dev_dbg(&hlpe_pdev->dev, "%s: handle pending notification\n", __func__);
@@ -576,6 +577,8 @@ static int hdmi_lpe_audio_remove(struct platform_device *pdev)
dev_dbg(&hlpe_pdev->dev, "Enter %s\n", __func__);
+ hdmi_audio_remove(pdev);
+
/* get context, release resources */
ctx = platform_get_drvdata(pdev);
iounmap(ctx->mmio_start);
--
2.9.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 14+ messages in thread