Re: [PATCH v2 6+/6] platform/x86: dell-wmi-led: fix coding style issues

["Michał Kępień" <kernel@kempniu.pl>]

> On Tue, 2017-01-17 at 08:17 +0100, Michał Kępień wrote:
> > Fix coding style issues in dell-wmi-led which checkpatch complains about
> > to make sure the module gets a clean start in the x86 platform driver
> > subsystem.
> 
> trivia:
> 
> > Signed-off-by: Michał Kępień <kernel@kempniu.pl>
> > ---
> > This is an extra patch that Jacek asked for [1].
> > 
> > [1] https://lkml.org/lkml/2017/1/16/631
> > 
> >  drivers/platform/x86/dell-wmi-led.c | 41 +++++++++++++++----------------------
> >  1 file changed, 16 insertions(+), 25 deletions(-)
> > 
> > diff --git a/drivers/platform/x86/dell-wmi-led.c b/drivers/platform/x86/dell-wmi-led.c
> []
> > @@ -46,21 +46,16 @@ struct bios_args {
> >  	unsigned char off_time;
> >  };
> >  
> > -static int dell_led_perform_fn(u8 length,
> > -		u8 result_code,
> > -		u8 device_id,
> > -		u8 command,
> > -		u8 on_time,
> > -		u8 off_time)
> > +static int dell_led_perform_fn(u8 length, u8 result_code, u8 device_id,
> > +			       u8 command, u8 on_time, u8 off_time)
> >  {
> > -	struct bios_args *bios_return;
> > -	u8 return_code;
> > -	union acpi_object *obj;
> >  	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> > +	struct bios_args *bios_return, args;
> >  	struct acpi_buffer input;
> > +	union acpi_object *obj;
> >  	acpi_status status;
> > +	u8 return_code;
> >  
> > -	struct bios_args args;
> >  	args.length = length;
> >  	args.result_code = result_code;
> >  	args.device_id = device_id;
> 
> This declaration might be nicer using
> 
> 	struct bios_args args = {
> 		.length = length,
> 		.result_code = result_code,
> 		.device_id = device_id,
> 		[...]
> 	};
> 
> []
> 
> > @@ -138,24 +128,25 @@ static void dell_led_set(struct led_classdev *led_cdev,
> >  }
> >  
> >  static int dell_led_blink(struct led_classdev *led_cdev,
> > -		unsigned long *delay_on,
> > -		unsigned long *delay_off)
> > +			  unsigned long *delay_on, unsigned long *delay_off)
> >  {
> >  	unsigned long on_eighths;
> >  	unsigned long off_eighths;
> >  
> > -	/* The Dell LED delay is based on 125ms intervals.
> > -	   Need to round up to next interval. */
> > +	/*
> > +	 * The Dell LED delay is based on 125ms intervals.
> > +	 * Need to round up to next interval.
> > +	 */
> >  
> >  	on_eighths = (*delay_on + 124) / 125;
> > -	if (0 == on_eighths)
> > +	if (on_eighths == 0)
> >  		on_eighths = 1;
> >  	if (on_eighths > 255)
> >  		on_eighths = 255;
> >  	*delay_on = on_eighths * 125;
> >  
> >  	off_eighths = (*delay_off + 124) / 125;
> > -	if (0 == off_eighths)
> > +	if (off_eighths == 0)
> >  		off_eighths = 1;
> >  	if (off_eighths > 255)
> >  		off_eighths = 255;
> 
> These could use DIV_ROUND_UP and clamp()

Thanks for taking a look, Joe, I can certainly fix these.

Jacek, as resending an updated version of this patch with Joe's
suggestions taken into account would be even more confusing than the
"PATCH v2 6+/6" subject I already resorted to, I suggest the following:
if this series goes to v3, I will include an updated version of this
patch in v3, but in case the remaining patches get acked in their
current shape by all maintainers, I will send an updated version of this
extra patch separately, after the rest of the series gets applied.  Does
this sound reasonable?

-- 
Best regards,
Michał Kępień