Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vinod.koul@intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, patches.audio@intel.com,
	lgirdwood@gmail.com, broonie@kernel.org,
	"Subhransu S. Prusty" <subhransu.s.prusty@intel.com>,
	Megha Dey <megha.dey@intel.com>
Subject: Re: [PATCH] ALSA: hda - Add Coffelake PCI ID
Date: Fri, 16 Jun 2017 13:26:17 +0530	[thread overview]
Message-ID: <20170616075616.GC19154@localhost> (raw)
In-Reply-To: <s5ha858qvzx.wl-tiwai@suse.de>

On Fri, Jun 16, 2017 at 08:36:50AM +0200, Takashi Iwai wrote:
> On Wed, 14 Jun 2017 07:41:10 +0200,
> Takashi Iwai wrote:
> > 
> > On Wed, 14 Jun 2017 07:25:17 +0200,
> > Takashi Iwai wrote:
> > > 
> > > But while writing this, I noticed that Broxton-T seems forgotten.
> > > Doesn't it need the similar workaround for SKL+ chips?
> > 
> > I meant like below.
> 
> Can anyone confirm whether it is required or not?

Sorry for the delay

> There are two things applied specific to BXT: one is the generic SKL+
> quirk and another is a quick to reduce DMA latency.  Maybe the latter
> one is superfluous for BXT-T but only the former one is needed?

Lets keep former and if someone complains add the later

> 
> 
> thanks,
> 
> Takashi
> 
> > 
> > Takashi
> > 
> > -- 8< --
> > From: Takashi Iwai <tiwai@suse.de>
> > Subject: [PATCH] ALSA: hda - Apply quirks to Broxton-T, too
> > 
> > Broxton-T was a forgotten child and we didn't apply the quirks
> > properly.  Let's fix it.
> > 
> > Cc: <stable@vger.kernel.org>
> > Signed-off-by: Takashi Iwai <tiwai@suse.de>
> > ---
> >  sound/pci/hda/hda_intel.c | 3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> > 
> > diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> > index e3c696c46a21..774f72b26d13 100644
> > --- a/sound/pci/hda/hda_intel.c
> > +++ b/sound/pci/hda/hda_intel.c
> > @@ -369,7 +369,8 @@ enum {
> >  #define IS_KBL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa171)
> >  #define IS_KBL_LP(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x9d71)
> >  #define IS_KBL_H(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa2f0)
> > -#define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98)
> > +#define IS_BXT(pci) ((pci)->vendor == 0x8086 && \
> > +		     ((pci)->device == 0x5a98 || (pci)->device == 0x1a98))
> >  #define IS_GLK(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x3198)
> >  #define IS_CFL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa348)
> >  #define IS_SKL_PLUS(pci) (IS_SKL(pci) || IS_SKL_LP(pci) || IS_BXT(pci)) || \
> > -- 
> > 2.13.1
> > 

-- 
~Vinod

  reply	other threads:[~2017-06-16  7:53 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-14  4:21 [PATCH] ALSA: hda - Add Coffelake PCI ID Subhransu S. Prusty
2017-06-14  4:45 ` Vinod Koul
2017-06-14  5:25   ` Takashi Iwai
2017-06-14  5:41     ` Takashi Iwai
2017-06-16  6:36       ` Takashi Iwai
2017-06-16  7:56         ` Vinod Koul [this message]
2017-06-16  7:54     ` Vinod Koul
2017-06-14  7:34 ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170616075616.GC19154@localhost \
    --to=vinod.koul@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=megha.dey@intel.com \
    --cc=patches.audio@intel.com \
    --cc=subhransu.s.prusty@intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox