[PATCH v2 0/3]ASoC: Intel: Skylake: Enable hdmi for GLK

[PATCH v2 0/3]ASoC: Intel: Skylake: Enable hdmi for GLK

[Pradeep Tewani]

GLK vendor nid is different from rest of the skylake platforms. Add vendor
nid as part of driver data and use it. Also enable support for GLK
platform.

Add the patch to remove the .owner initialization in bxt driver as well

Changes in v2:
	Removed the .owner field in driver
	Replaced the strcmp with strncmp for bxt_rt298 probe

Pradeep Tewani (3):
  ASoC: Intel: board: Remove .owner initialization in bxt_rt298 driver
  ASoC: hdac_hdmi: Add the vendor nid for Geminilake HDMI
  ASoC: Intel: board: Add Geminilake platform support

 sound/soc/codecs/hdac_hdmi.c       | 39 ++++++++++++++---
 sound/soc/intel/boards/bxt_rt298.c | 85 ++++++++++++++++++++++++++++++++++++--
 2 files changed, 115 insertions(+), 9 deletions(-)

-- 
2.7.4

[PATCH v2 1/3] ASoC: Intel: board: Remove .owner initialization in bxt_rt298 driver

[Pradeep Tewani]

The .owner field is not required to be initialized in the driver. So,
remove it.

Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com>
---
 sound/soc/intel/boards/bxt_rt298.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/intel/boards/bxt_rt298.c b/sound/soc/intel/boards/bxt_rt298.c
index 0c3a3cb..1daf98e 100644
--- a/sound/soc/intel/boards/bxt_rt298.c
+++ b/sound/soc/intel/boards/bxt_rt298.c
@@ -492,7 +492,6 @@ static int bxt_card_late_probe(struct snd_soc_card *card)
 /* broxton audio machine driver for SPT + RT298S */
 static struct snd_soc_card broxton_rt298 = {
 	.name = "broxton-rt298",
-	.owner = THIS_MODULE,
 	.dai_link = broxton_rt298_dais,
 	.num_links = ARRAY_SIZE(broxton_rt298_dais),
 	.controls = broxton_controls,
-- 
2.7.4

Applied "ASoC: Intel: board: Remove .owner initialization in bxt_rt298 driver" to the asoc tree

[Mark Brown]

The patch

   ASoC: Intel: board: Remove .owner initialization in bxt_rt298 driver

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 0e46ccd5bc12ab28da9d2f514492aeead65f8332 Mon Sep 17 00:00:00 2001
From: Pradeep Tewani <pradeep.d.tewani@intel.com>
Date: Thu, 20 Jul 2017 11:40:55 +0530
Subject: [PATCH] ASoC: Intel: board: Remove .owner initialization in bxt_rt298
 driver

The .owner field is not required to be initialized in the driver. So,
remove it.

Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/intel/boards/bxt_rt298.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/intel/boards/bxt_rt298.c b/sound/soc/intel/boards/bxt_rt298.c
index 0c3a3cbcb884..1daf98ef9d28 100644
--- a/sound/soc/intel/boards/bxt_rt298.c
+++ b/sound/soc/intel/boards/bxt_rt298.c
@@ -492,7 +492,6 @@ static int bxt_card_late_probe(struct snd_soc_card *card)
 /* broxton audio machine driver for SPT + RT298S */
 static struct snd_soc_card broxton_rt298 = {
 	.name = "broxton-rt298",
-	.owner = THIS_MODULE,
 	.dai_link = broxton_rt298_dais,
 	.num_links = ARRAY_SIZE(broxton_rt298_dais),
 	.controls = broxton_controls,
-- 
2.13.2

[PATCH v2 2/3] ASoC: hdac_hdmi: Add the vendor nid for Geminilake HDMI

[Pradeep Tewani]

Geminilake HDMI codec has the different vendor nid. This patch adds the
vendor nid as the part of driver data and uses it.

Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com>
---
 sound/soc/codecs/hdac_hdmi.c | 39 ++++++++++++++++++++++++++++++++++-----
 1 file changed, 34 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index e6de50a..fb2b843 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -121,6 +121,10 @@ struct hdac_hdmi_dai_port_map {
 	struct hdac_hdmi_cvt *cvt;
 };
 
+struct hdac_hdmi_drv_data {
+	unsigned int vendor_nid;
+};
+
 struct hdac_hdmi_priv {
 	struct hdac_hdmi_dai_port_map dai_map[HDA_MAX_CVTS];
 	struct list_head pin_list;
@@ -131,6 +135,7 @@ struct hdac_hdmi_priv {
 	int num_ports;
 	struct mutex pin_mutex;
 	struct hdac_chmap chmap;
+	struct hdac_hdmi_drv_data *drv_data;
 };
 
 static struct hdac_hdmi_pcm *
@@ -1321,6 +1326,7 @@ static int hdac_hdmi_add_pin(struct hdac_ext_device *edev, hda_nid_t nid)
 }
 
 #define INTEL_VENDOR_NID 0x08
+#define INTEL_GLK_VENDOR_NID 0x0b
 #define INTEL_GET_VENDOR_VERB 0xf81
 #define INTEL_SET_VENDOR_VERB 0x781
 #define INTEL_EN_DP12			0x02 /* enable DP 1.2 features */
@@ -1329,14 +1335,17 @@ static int hdac_hdmi_add_pin(struct hdac_ext_device *edev, hda_nid_t nid)
 static void hdac_hdmi_skl_enable_all_pins(struct hdac_device *hdac)
 {
 	unsigned int vendor_param;
+	struct hdac_ext_device *edev = to_ehdac_device(hdac);
+	struct hdac_hdmi_priv *hdmi = edev->private_data;
+	unsigned int vendor_nid = hdmi->drv_data->vendor_nid;
 
-	vendor_param = snd_hdac_codec_read(hdac, INTEL_VENDOR_NID, 0,
+	vendor_param = snd_hdac_codec_read(hdac, vendor_nid, 0,
 				INTEL_GET_VENDOR_VERB, 0);
 	if (vendor_param == -1 || vendor_param & INTEL_EN_ALL_PIN_CVTS)
 		return;
 
 	vendor_param |= INTEL_EN_ALL_PIN_CVTS;
-	vendor_param = snd_hdac_codec_read(hdac, INTEL_VENDOR_NID, 0,
+	vendor_param = snd_hdac_codec_read(hdac, vendor_nid, 0,
 				INTEL_SET_VENDOR_VERB, vendor_param);
 	if (vendor_param == -1)
 		return;
@@ -1345,15 +1354,18 @@ static void hdac_hdmi_skl_enable_all_pins(struct hdac_device *hdac)
 static void hdac_hdmi_skl_enable_dp12(struct hdac_device *hdac)
 {
 	unsigned int vendor_param;
+	struct hdac_ext_device *edev = to_ehdac_device(hdac);
+	struct hdac_hdmi_priv *hdmi = edev->private_data;
+	unsigned int vendor_nid = hdmi->drv_data->vendor_nid;
 
-	vendor_param = snd_hdac_codec_read(hdac, INTEL_VENDOR_NID, 0,
+	vendor_param = snd_hdac_codec_read(hdac, vendor_nid, 0,
 				INTEL_GET_VENDOR_VERB, 0);
 	if (vendor_param == -1 || vendor_param & INTEL_EN_DP12)
 		return;
 
 	/* enable DP1.2 mode */
 	vendor_param |= INTEL_EN_DP12;
-	vendor_param = snd_hdac_codec_read(hdac, INTEL_VENDOR_NID, 0,
+	vendor_param = snd_hdac_codec_read(hdac, vendor_nid, 0,
 				INTEL_SET_VENDOR_VERB, vendor_param);
 	if (vendor_param == -1)
 		return;
@@ -1927,6 +1939,14 @@ static int hdac_hdmi_get_spk_alloc(struct hdac_device *hdac, int pcm_idx)
 	return port->eld.info.spk_alloc;
 }
 
+static struct hdac_hdmi_drv_data intel_glk_drv_data  = {
+	.vendor_nid = INTEL_GLK_VENDOR_NID,
+};
+
+static struct hdac_hdmi_drv_data intel_drv_data  = {
+	.vendor_nid = INTEL_VENDOR_NID,
+};
+
 static int hdac_hdmi_dev_probe(struct hdac_ext_device *edev)
 {
 	struct hdac_device *codec = &edev->hdac;
@@ -1935,6 +1955,8 @@ static int hdac_hdmi_dev_probe(struct hdac_ext_device *edev)
 	struct hdac_ext_link *hlink = NULL;
 	int num_dais = 0;
 	int ret = 0;
+	struct hdac_driver *hdrv = drv_to_hdac_driver(codec->dev.driver);
+	const struct hda_device_id *hdac_id = hdac_get_device_id(codec, hdrv);
 
 	/* hold the ref while we probe */
 	hlink = snd_hdac_ext_bus_get_link(edev->ebus, dev_name(&edev->hdac.dev));
@@ -1956,6 +1978,12 @@ static int hdac_hdmi_dev_probe(struct hdac_ext_device *edev)
 	hdmi_priv->chmap.ops.is_pcm_attached = is_hdac_hdmi_pcm_attached;
 	hdmi_priv->chmap.ops.get_spk_alloc = hdac_hdmi_get_spk_alloc;
 
+	if (hdac_id->driver_data)
+		hdmi_priv->drv_data =
+			(struct hdac_hdmi_drv_data *)hdac_id->driver_data;
+	else
+		hdmi_priv->drv_data = &intel_drv_data;
+
 	dev_set_drvdata(&codec->dev, edev);
 
 	INIT_LIST_HEAD(&hdmi_priv->pin_list);
@@ -2127,7 +2155,8 @@ static const struct hda_device_id hdmi_list[] = {
 	HDA_CODEC_EXT_ENTRY(0x80862809, 0x100000, "Skylake HDMI", 0),
 	HDA_CODEC_EXT_ENTRY(0x8086280a, 0x100000, "Broxton HDMI", 0),
 	HDA_CODEC_EXT_ENTRY(0x8086280b, 0x100000, "Kabylake HDMI", 0),
-	HDA_CODEC_EXT_ENTRY(0x8086280d, 0x100000, "Geminilake HDMI", 0),
+	HDA_CODEC_EXT_ENTRY(0x8086280d, 0x100000, "Geminilake HDMI",
+						   &intel_glk_drv_data),
 	{}
 };
 
-- 
2.7.4

[PATCH v2 3/3] ASoC: Intel: board: Add Geminilake platform support

[Pradeep Tewani]

Geminilake also features rt298 codec, so use the same machine driver
as Broxton. Geminilake uses SSP2 instead of SSP5.

Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com>
---
 sound/soc/intel/boards/bxt_rt298.c | 84 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 81 insertions(+), 3 deletions(-)

diff --git a/sound/soc/intel/boards/bxt_rt298.c b/sound/soc/intel/boards/bxt_rt298.c
index 1daf98e..a4b5bcb 100644
--- a/sound/soc/intel/boards/bxt_rt298.c
+++ b/sound/soc/intel/boards/bxt_rt298.c
@@ -114,7 +114,44 @@ static const struct snd_soc_dapm_route broxton_rt298_map[] = {
 	{ "iDisp2 Tx", NULL, "iDisp2_out"},
 	{ "hifi1", NULL, "iDisp1 Tx"},
 	{ "iDisp1 Tx", NULL, "iDisp1_out"},
+};
+
+static const struct snd_soc_dapm_route geminilake_rt298_map[] = {
+	/* speaker */
+	{"Speaker", NULL, "SPOR"},
+	{"Speaker", NULL, "SPOL"},
+
+	/* HP jack connectors - unknown if we have jack detect */
+	{"Headphone Jack", NULL, "HPO Pin"},
+
+	/* other jacks */
+	{"MIC1", NULL, "Mic Jack"},
+
+	/* digital mics */
+	{"DMIC1 Pin", NULL, "DMIC2"},
+	{"DMic", NULL, "SoC DMIC"},
+
+	{"HDMI1", NULL, "hif5-0 Output"},
+	{"HDMI2", NULL, "hif6-0 Output"},
+	{"HDMI2", NULL, "hif7-0 Output"},
+
+	/* CODEC BE connections */
+	{ "AIF1 Playback", NULL, "ssp2 Tx"},
+	{ "ssp2 Tx", NULL, "codec0_out"},
+	{ "ssp2 Tx", NULL, "codec1_out"},
+
+	{ "codec0_in", NULL, "ssp2 Rx" },
+	{ "ssp2 Rx", NULL, "AIF1 Capture" },
 
+	{ "dmic01_hifi", NULL, "DMIC01 Rx" },
+	{ "DMIC01 Rx", NULL, "Capture" },
+
+	{ "hifi3", NULL, "iDisp3 Tx"},
+	{ "iDisp3 Tx", NULL, "iDisp3_out"},
+	{ "hifi2", NULL, "iDisp2 Tx"},
+	{ "iDisp2 Tx", NULL, "iDisp2_out"},
+	{ "hifi1", NULL, "iDisp1 Tx"},
+	{ "iDisp1 Tx", NULL, "iDisp1_out"},
 };
 
 static int broxton_rt298_fe_init(struct snd_soc_pcm_runtime *rtd)
@@ -505,9 +542,41 @@ static struct snd_soc_card broxton_rt298 = {
 
 };
 
+static struct snd_soc_card geminilake_rt298 = {
+	.name = "geminilake-rt298",
+	.dai_link = broxton_rt298_dais,
+	.num_links = ARRAY_SIZE(broxton_rt298_dais),
+	.controls = broxton_controls,
+	.num_controls = ARRAY_SIZE(broxton_controls),
+	.dapm_widgets = broxton_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(broxton_widgets),
+	.dapm_routes = geminilake_rt298_map,
+	.num_dapm_routes = ARRAY_SIZE(geminilake_rt298_map),
+	.fully_routed = true,
+	.late_probe = bxt_card_late_probe,
+};
+
 static int broxton_audio_probe(struct platform_device *pdev)
 {
 	struct bxt_rt286_private *ctx;
+	struct snd_soc_card *card =
+			(struct snd_soc_card *)pdev->id_entry->driver_data;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(broxton_rt298_dais); i++) {
+		if (!strncmp(card->dai_link[i].codec_name, "i2c-INT343A:00",
+						I2C_NAME_SIZE)) {
+			if (!strncmp(card->name, "broxton-rt298",
+						PLATFORM_NAME_SIZE)) {
+				card->dai_link[i].name = "SSP5-Codec";
+				card->dai_link[i].cpu_dai_name = "SSP5 Pin";
+			} else if (!strncmp(card->name, "geminilake-rt298",
+						PLATFORM_NAME_SIZE)) {
+				card->dai_link[i].name = "SSP2-Codec";
+				card->dai_link[i].cpu_dai_name = "SSP2 Pin";
+			}
+		}
+	}
 
 	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_ATOMIC);
 	if (!ctx)
@@ -515,18 +584,26 @@ static int broxton_audio_probe(struct platform_device *pdev)
 
 	INIT_LIST_HEAD(&ctx->hdmi_pcm_list);
 
-	broxton_rt298.dev = &pdev->dev;
-	snd_soc_card_set_drvdata(&broxton_rt298, ctx);
+	card->dev = &pdev->dev;
+	snd_soc_card_set_drvdata(card, ctx);
 
-	return devm_snd_soc_register_card(&pdev->dev, &broxton_rt298);
+	return devm_snd_soc_register_card(&pdev->dev, card);
 }
 
+static const struct platform_device_id bxt_board_ids[] = {
+	{ .name = "bxt_alc298s_i2s", .driver_data =
+				(unsigned long)&broxton_rt298 },
+	{ .name = "glk_alc298s_i2s", .driver_data =
+				(unsigned long)&geminilake_rt298 },
+};
+
 static struct platform_driver broxton_audio = {
 	.probe = broxton_audio_probe,
 	.driver = {
 		.name = "bxt_alc298s_i2s",
 		.pm = &snd_soc_pm_ops,
 	},
+	.id_table = bxt_board_ids,
 };
 module_platform_driver(broxton_audio)
 
@@ -536,3 +613,4 @@ MODULE_AUTHOR("Senthilnathan Veppur <senthilnathanx.veppur@intel.com>");
 MODULE_DESCRIPTION("Intel SST Audio for Broxton");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:bxt_alc298s_i2s");
+MODULE_ALIAS("platform:glk_alc298s_i2s");
-- 
2.7.4

Applied "ASoC: Intel: board: Add Geminilake platform support" to the asoc tree

[Mark Brown]

The patch

   ASoC: Intel: board: Add Geminilake platform support

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 669eb871c440e19351c2d476d1837ed8a62afe16 Mon Sep 17 00:00:00 2001
From: Pradeep Tewani <pradeep.d.tewani@intel.com>
Date: Thu, 20 Jul 2017 11:40:57 +0530
Subject: [PATCH] ASoC: Intel: board: Add Geminilake platform support

Geminilake also features rt298 codec, so use the same machine driver
as Broxton. Geminilake uses SSP2 instead of SSP5.

Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/intel/boards/bxt_rt298.c | 84 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 81 insertions(+), 3 deletions(-)

diff --git a/sound/soc/intel/boards/bxt_rt298.c b/sound/soc/intel/boards/bxt_rt298.c
index 1daf98ef9d28..a4b5bcb1f6f8 100644
--- a/sound/soc/intel/boards/bxt_rt298.c
+++ b/sound/soc/intel/boards/bxt_rt298.c
@@ -114,7 +114,44 @@ static const struct snd_soc_dapm_route broxton_rt298_map[] = {
 	{ "iDisp2 Tx", NULL, "iDisp2_out"},
 	{ "hifi1", NULL, "iDisp1 Tx"},
 	{ "iDisp1 Tx", NULL, "iDisp1_out"},
+};
+
+static const struct snd_soc_dapm_route geminilake_rt298_map[] = {
+	/* speaker */
+	{"Speaker", NULL, "SPOR"},
+	{"Speaker", NULL, "SPOL"},
+
+	/* HP jack connectors - unknown if we have jack detect */
+	{"Headphone Jack", NULL, "HPO Pin"},
+
+	/* other jacks */
+	{"MIC1", NULL, "Mic Jack"},
+
+	/* digital mics */
+	{"DMIC1 Pin", NULL, "DMIC2"},
+	{"DMic", NULL, "SoC DMIC"},
+
+	{"HDMI1", NULL, "hif5-0 Output"},
+	{"HDMI2", NULL, "hif6-0 Output"},
+	{"HDMI2", NULL, "hif7-0 Output"},
+
+	/* CODEC BE connections */
+	{ "AIF1 Playback", NULL, "ssp2 Tx"},
+	{ "ssp2 Tx", NULL, "codec0_out"},
+	{ "ssp2 Tx", NULL, "codec1_out"},
+
+	{ "codec0_in", NULL, "ssp2 Rx" },
+	{ "ssp2 Rx", NULL, "AIF1 Capture" },
 
+	{ "dmic01_hifi", NULL, "DMIC01 Rx" },
+	{ "DMIC01 Rx", NULL, "Capture" },
+
+	{ "hifi3", NULL, "iDisp3 Tx"},
+	{ "iDisp3 Tx", NULL, "iDisp3_out"},
+	{ "hifi2", NULL, "iDisp2 Tx"},
+	{ "iDisp2 Tx", NULL, "iDisp2_out"},
+	{ "hifi1", NULL, "iDisp1 Tx"},
+	{ "iDisp1 Tx", NULL, "iDisp1_out"},
 };
 
 static int broxton_rt298_fe_init(struct snd_soc_pcm_runtime *rtd)
@@ -505,9 +542,41 @@ static struct snd_soc_card broxton_rt298 = {
 
 };
 
+static struct snd_soc_card geminilake_rt298 = {
+	.name = "geminilake-rt298",
+	.dai_link = broxton_rt298_dais,
+	.num_links = ARRAY_SIZE(broxton_rt298_dais),
+	.controls = broxton_controls,
+	.num_controls = ARRAY_SIZE(broxton_controls),
+	.dapm_widgets = broxton_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(broxton_widgets),
+	.dapm_routes = geminilake_rt298_map,
+	.num_dapm_routes = ARRAY_SIZE(geminilake_rt298_map),
+	.fully_routed = true,
+	.late_probe = bxt_card_late_probe,
+};
+
 static int broxton_audio_probe(struct platform_device *pdev)
 {
 	struct bxt_rt286_private *ctx;
+	struct snd_soc_card *card =
+			(struct snd_soc_card *)pdev->id_entry->driver_data;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(broxton_rt298_dais); i++) {
+		if (!strncmp(card->dai_link[i].codec_name, "i2c-INT343A:00",
+						I2C_NAME_SIZE)) {
+			if (!strncmp(card->name, "broxton-rt298",
+						PLATFORM_NAME_SIZE)) {
+				card->dai_link[i].name = "SSP5-Codec";
+				card->dai_link[i].cpu_dai_name = "SSP5 Pin";
+			} else if (!strncmp(card->name, "geminilake-rt298",
+						PLATFORM_NAME_SIZE)) {
+				card->dai_link[i].name = "SSP2-Codec";
+				card->dai_link[i].cpu_dai_name = "SSP2 Pin";
+			}
+		}
+	}
 
 	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_ATOMIC);
 	if (!ctx)
@@ -515,18 +584,26 @@ static int broxton_audio_probe(struct platform_device *pdev)
 
 	INIT_LIST_HEAD(&ctx->hdmi_pcm_list);
 
-	broxton_rt298.dev = &pdev->dev;
-	snd_soc_card_set_drvdata(&broxton_rt298, ctx);
+	card->dev = &pdev->dev;
+	snd_soc_card_set_drvdata(card, ctx);
 
-	return devm_snd_soc_register_card(&pdev->dev, &broxton_rt298);
+	return devm_snd_soc_register_card(&pdev->dev, card);
 }
 
+static const struct platform_device_id bxt_board_ids[] = {
+	{ .name = "bxt_alc298s_i2s", .driver_data =
+				(unsigned long)&broxton_rt298 },
+	{ .name = "glk_alc298s_i2s", .driver_data =
+				(unsigned long)&geminilake_rt298 },
+};
+
 static struct platform_driver broxton_audio = {
 	.probe = broxton_audio_probe,
 	.driver = {
 		.name = "bxt_alc298s_i2s",
 		.pm = &snd_soc_pm_ops,
 	},
+	.id_table = bxt_board_ids,
 };
 module_platform_driver(broxton_audio)
 
@@ -536,3 +613,4 @@ MODULE_AUTHOR("Senthilnathan Veppur <senthilnathanx.veppur@intel.com>");
 MODULE_DESCRIPTION("Intel SST Audio for Broxton");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:bxt_alc298s_i2s");
+MODULE_ALIAS("platform:glk_alc298s_i2s");
-- 
2.13.2

Re: [PATCH v2 0/3]ASoC: Intel: Skylake: Enable hdmi for GLK

[Vinod Koul]

On Thu, Jul 20, 2017 at 11:40:54AM +0530, Pradeep Tewani wrote:
> GLK vendor nid is different from rest of the skylake platforms. Add vendor
> nid as part of driver data and use it. Also enable support for GLK
> platform.
> 
> Add the patch to remove the .owner initialization in bxt driver as well

Thanks Pradeep for fixing these

Acked-By: Vinod Koul <vinod.koul@intel.com>

> 
> Changes in v2:
> 	Removed the .owner field in driver
> 	Replaced the strcmp with strncmp for bxt_rt298 probe
> 
> Pradeep Tewani (3):
>   ASoC: Intel: board: Remove .owner initialization in bxt_rt298 driver
>   ASoC: hdac_hdmi: Add the vendor nid for Geminilake HDMI
>   ASoC: Intel: board: Add Geminilake platform support
> 
>  sound/soc/codecs/hdac_hdmi.c       | 39 ++++++++++++++---
>  sound/soc/intel/boards/bxt_rt298.c | 85 ++++++++++++++++++++++++++++++++++++--
>  2 files changed, 115 insertions(+), 9 deletions(-)
> 
> -- 
> 2.7.4
> 

-- 
~Vinod