From: Paul Kocialkowski <contact@paulk.fr>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org,
alsa-devel@alsa-project.org
Cc: Stephen Warren <swarren@nvidia.com>,
Paul Kocialkowski <contact@paulk.fr>,
Takashi Iwai <tiwai@suse.com>,
Russell King <linux@armlinux.org.uk>,
Mark Brown <broonie@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>
Subject: [PATCH 1/3] sound: ASoC: tegra: Remove SoC-specific Kconfig depends and selects
Date: Sun, 30 Jul 2017 13:22:18 +0200 [thread overview]
Message-ID: <20170730112220.15525-1-contact@paulk.fr> (raw)
This removes the SoC-specific dependencies on the platform drivers,
as well as SoC-specific selections of platform drivers for the
machine drivers. The rationale behind this change is that the
dependencies are not actual build dependencies but run-time ones.
The previously listed SoCs were also incomplete: for instance, tegra124
uses the tegra30 platform drivers, which could not be built without
ARCH_TEGRA_3x_SOC set.
Descriptions of the tristates are also added to allow these options
to be set via defconfig/menuconfig.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
---
sound/soc/tegra/Kconfig | 42 ++++++++++++++----------------------------
1 file changed, 14 insertions(+), 28 deletions(-)
diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig
index efbe8d4c019e..6875fc39a575 100644
--- a/sound/soc/tegra/Kconfig
+++ b/sound/soc/tegra/Kconfig
@@ -9,8 +9,8 @@ config SND_SOC_TEGRA
Say Y or M here if you want support for SoC audio on Tegra.
config SND_SOC_TEGRA20_AC97
- tristate
- depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
+ tristate "Tegra20 AC97 interface"
+ depends on SND_SOC_TEGRA
select SND_SOC_AC97_BUS
select SND_SOC_TEGRA20_DAS
help
@@ -19,16 +19,16 @@ config SND_SOC_TEGRA20_AC97
machine drivers to support below.
config SND_SOC_TEGRA20_DAS
- tristate
- depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
+ tristate "Tegra20 DAS module"
+ depends on SND_SOC_TEGRA
help
Say Y or M if you want to add support for the Tegra20 DAS module.
You will also need to select the individual machine drivers to
support below.
config SND_SOC_TEGRA20_I2S
- tristate
- depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
+ tristate "Tegra20 I2S interface"
+ depends on SND_SOC_TEGRA
select SND_SOC_TEGRA20_DAS
help
Say Y or M if you want to add support for codecs attached to the
@@ -36,8 +36,8 @@ config SND_SOC_TEGRA20_I2S
machine drivers to support below.
config SND_SOC_TEGRA20_SPDIF
- tristate
- depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
+ tristate "Tegra20 SPDIF interface"
+ depends on SND_SOC_TEGRA
default m
help
Say Y or M if you want to add support for the Tegra20 SPDIF interface.
@@ -45,16 +45,16 @@ config SND_SOC_TEGRA20_SPDIF
below.
config SND_SOC_TEGRA30_AHUB
- tristate
- depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC
+ tristate "Tegra30 AHUB module"
+ depends on SND_SOC_TEGRA
help
- Say Y or M if you want to add support for the Tegra20 AHUB module.
+ Say Y or M if you want to add support for the Tegra30 AHUB module.
You will also need to select the individual machine drivers to
support below.
config SND_SOC_TEGRA30_I2S
- tristate
- depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC
+ tristate "Tegra30 I2S interface"
+ depends on SND_SOC_TEGRA
select SND_SOC_TEGRA30_AHUB
help
Say Y or M if you want to add support for codecs attached to the
@@ -64,8 +64,6 @@ config SND_SOC_TEGRA30_I2S
config SND_SOC_TEGRA_RT5640
tristate "SoC Audio support for Tegra boards using an RT5640 codec"
depends on SND_SOC_TEGRA && I2C && GPIOLIB
- select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
- select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
select SND_SOC_RT5640
help
Say Y or M here if you want to add support for SoC audio on Tegra
@@ -74,8 +72,6 @@ config SND_SOC_TEGRA_RT5640
config SND_SOC_TEGRA_WM8753
tristate "SoC Audio support for Tegra boards using a WM8753 codec"
depends on SND_SOC_TEGRA && I2C && GPIOLIB
- select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
- select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
select SND_SOC_WM8753
help
Say Y or M here if you want to add support for SoC audio on Tegra
@@ -84,8 +80,6 @@ config SND_SOC_TEGRA_WM8753
config SND_SOC_TEGRA_WM8903
tristate "SoC Audio support for Tegra boards using a WM8903 codec"
depends on SND_SOC_TEGRA && I2C && GPIOLIB
- select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
- select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
select SND_SOC_WM8903
help
Say Y or M here if you want to add support for SoC audio on Tegra
@@ -94,7 +88,7 @@ config SND_SOC_TEGRA_WM8903
config SND_SOC_TEGRA_WM9712
tristate "SoC Audio support for Tegra boards using a WM9712 codec"
- depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC && GPIOLIB
+ depends on SND_SOC_TEGRA && GPIOLIB
select SND_SOC_TEGRA20_AC97
select SND_SOC_WM9712
help
@@ -104,7 +98,6 @@ config SND_SOC_TEGRA_WM9712
config SND_SOC_TEGRA_TRIMSLICE
tristate "SoC Audio support for TrimSlice board"
depends on SND_SOC_TEGRA && I2C
- select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_TLV320AIC23_I2C
help
Say Y or M here if you want to add support for SoC audio on the
@@ -113,7 +106,6 @@ config SND_SOC_TEGRA_TRIMSLICE
config SND_SOC_TEGRA_ALC5632
tristate "SoC Audio support for Tegra boards using an ALC5632 codec"
depends on SND_SOC_TEGRA && I2C && GPIOLIB
- select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_ALC5632
help
Say Y or M here if you want to add support for SoC audio on the
@@ -122,8 +114,6 @@ config SND_SOC_TEGRA_ALC5632
config SND_SOC_TEGRA_MAX98090
tristate "SoC Audio support for Tegra boards using a MAX98090 codec"
depends on SND_SOC_TEGRA && I2C && GPIOLIB
- select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
- select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
select SND_SOC_MAX98090
help
Say Y or M here if you want to add support for SoC audio on Tegra
@@ -132,8 +122,6 @@ config SND_SOC_TEGRA_MAX98090
config SND_SOC_TEGRA_RT5677
tristate "SoC Audio support for Tegra boards using a RT5677 codec"
depends on SND_SOC_TEGRA && I2C && GPIOLIB
- select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
- select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
select SND_SOC_RT5677
help
Say Y or M here if you want to add support for SoC audio on Tegra
@@ -142,8 +130,6 @@ config SND_SOC_TEGRA_RT5677
config SND_SOC_TEGRA_SGTL5000
tristate "SoC Audio support for Tegra boards using a SGTL5000 codec"
depends on SND_SOC_TEGRA && I2C && GPIOLIB
- select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
- select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
select SND_SOC_SGTL5000
help
Say Y or M here if you want to add support for SoC audio on Tegra
--
2.13.3
next reply other threads:[~2017-07-30 11:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-30 11:22 Paul Kocialkowski [this message]
2017-07-30 11:22 ` [PATCH 2/3] ARM: configs: Add Tegra I2S interfaces to tegra_defconfig Paul Kocialkowski
[not found] ` <20170730112220.15525-2-contact-W9ppeneeCTY@public.gmane.org>
2017-07-31 10:22 ` Thierry Reding
2017-07-30 11:22 ` [PATCH 3/3] ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig Paul Kocialkowski
[not found] ` <20170730112220.15525-3-contact-W9ppeneeCTY@public.gmane.org>
2017-07-31 10:22 ` Thierry Reding
[not found] ` <20170730112220.15525-1-contact-W9ppeneeCTY@public.gmane.org>
2017-07-31 10:23 ` [PATCH 1/3] sound: ASoC: tegra: Remove SoC-specific Kconfig depends and selects Thierry Reding
2017-08-17 14:22 ` Thierry Reding
2017-08-17 14:26 ` Mark Brown
2017-08-17 19:07 ` Paul Kocialkowski
2017-08-18 11:48 ` Applied "ASoC: tegra: Remove SoC-specific Kconfig depends and selects" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170730112220.15525-1-contact@paulk.fr \
--to=contact@paulk.fr \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=jonathanh@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=swarren@nvidia.com \
--cc=thierry.reding@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).