Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ed Blake <ed.blake@sondrel.com>
To: lgirdwood@gmail.com, broonie@kernel.org
Cc: alsa-devel@alsa-project.org, Ed Blake <ed.blake@sondrel.com>
Subject: [PATCH v2 2/2] ASoC: img-i2s-out: Add control of sys clock to runtime PM
Date: Fri,  6 Oct 2017 15:52:28 +0100	[thread overview]
Message-ID: <20171006145228.13529-3-ed.blake@sondrel.com> (raw)
In-Reply-To: <20171006145228.13529-1-ed.blake@sondrel.com>

Disable sys clock as well as ref clock when runtime suspended.

Signed-off-by: Ed Blake <ed.blake@sondrel.com>
---
Changes in v2:
 - Errors returned from pm_runtime_get_sync are now handled
---
 sound/soc/img/img-i2s-out.c | 60 +++++++++++++++++++++++----------------------
 1 file changed, 31 insertions(+), 29 deletions(-)

diff --git a/sound/soc/img/img-i2s-out.c b/sound/soc/img/img-i2s-out.c
index 1d831c625fe2..30a95bcef2db 100644
--- a/sound/soc/img/img-i2s-out.c
+++ b/sound/soc/img/img-i2s-out.c
@@ -71,8 +71,8 @@ static int img_i2s_out_runtime_suspend(struct device *dev)
 {
 	struct img_i2s_out *i2s = dev_get_drvdata(dev);
 
-	if (!i2s->force_clk_active)
-		clk_disable_unprepare(i2s->clk_ref);
+	clk_disable_unprepare(i2s->clk_ref);
+	clk_disable_unprepare(i2s->clk_sys);
 
 	return 0;
 }
@@ -82,12 +82,17 @@ static int img_i2s_out_runtime_resume(struct device *dev)
 	struct img_i2s_out *i2s = dev_get_drvdata(dev);
 	int ret;
 
-	if (!i2s->force_clk_active) {
-		ret = clk_prepare_enable(i2s->clk_ref);
-		if (ret) {
-			dev_err(dev, "clk_enable failed: %d\n", ret);
-			return ret;
-		}
+	ret = clk_prepare_enable(i2s->clk_sys);
+	if (ret) {
+		dev_err(dev, "clk_enable failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(i2s->clk_ref);
+	if (ret) {
+		dev_err(dev, "clk_enable failed: %d\n", ret);
+		clk_disable_unprepare(i2s->clk_sys);
+		return ret;
 	}
 
 	return 0;
@@ -289,7 +294,7 @@ static int img_i2s_out_hw_params(struct snd_pcm_substream *substream,
 static int img_i2s_out_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct img_i2s_out *i2s = snd_soc_dai_get_drvdata(dai);
-	int i;
+	int i, ret;
 	bool force_clk_active;
 	u32 chan_control_mask, control_mask, chan_control_set = 0;
 	u32 reg, control_set = 0;
@@ -344,6 +349,10 @@ static int img_i2s_out_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 
 	chan_control_mask = IMG_I2S_OUT_CHAN_CTL_CLKT_MASK;
 
+	ret = pm_runtime_get_sync(i2s->dev);
+	if (ret < 0)
+		return ret;
+
 	img_i2s_out_disable(i2s);
 
 	reg = img_i2s_out_readl(i2s, IMG_I2S_OUT_CTL);
@@ -363,6 +372,7 @@ static int img_i2s_out_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		img_i2s_out_ch_enable(i2s, i);
 
 	img_i2s_out_enable(i2s);
+	pm_runtime_put(i2s->dev);
 
 	i2s->force_clk_active = force_clk_active;
 
@@ -469,16 +479,20 @@ static int img_i2s_out_probe(struct platform_device *pdev)
 		return PTR_ERR(i2s->clk_ref);
 	}
 
-	ret = clk_prepare_enable(i2s->clk_sys);
-	if (ret)
-		return ret;
-
 	i2s->suspend_ch_ctl = devm_kzalloc(dev,
 		sizeof(*i2s->suspend_ch_ctl) * i2s->max_i2s_chan, GFP_KERNEL);
-	if (!i2s->suspend_ch_ctl) {
-		ret = -ENOMEM;
-		goto err_clk_disable;
+	if (!i2s->suspend_ch_ctl)
+		return -ENOMEM;
+
+	pm_runtime_enable(&pdev->dev);
+	if (!pm_runtime_enabled(&pdev->dev)) {
+		ret = img_i2s_out_runtime_resume(&pdev->dev);
+		if (ret)
+			goto err_pm_disable;
 	}
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		goto err_suspend;
 
 	reg = IMG_I2S_OUT_CTL_FRM_SIZE_MASK;
 	img_i2s_out_writel(i2s, reg, IMG_I2S_OUT_CTL);
@@ -492,13 +506,7 @@ static int img_i2s_out_probe(struct platform_device *pdev)
 		img_i2s_out_ch_writel(i2s, i, reg, IMG_I2S_OUT_CH_CTL);
 
 	img_i2s_out_reset(i2s);
-
-	pm_runtime_enable(&pdev->dev);
-	if (!pm_runtime_enabled(&pdev->dev)) {
-		ret = img_i2s_out_runtime_resume(&pdev->dev);
-		if (ret)
-			goto err_pm_disable;
-	}
+	pm_runtime_put(&pdev->dev);
 
 	i2s->active_channels = 1;
 	i2s->dma_data.addr = res->start + IMG_I2S_OUT_TX_FIFO;
@@ -529,22 +537,16 @@ static int img_i2s_out_probe(struct platform_device *pdev)
 		img_i2s_out_runtime_suspend(&pdev->dev);
 err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
-err_clk_disable:
-	clk_disable_unprepare(i2s->clk_sys);
 
 	return ret;
 }
 
 static int img_i2s_out_dev_remove(struct platform_device *pdev)
 {
-	struct img_i2s_out *i2s = platform_get_drvdata(pdev);
-
 	pm_runtime_disable(&pdev->dev);
 	if (!pm_runtime_status_suspended(&pdev->dev))
 		img_i2s_out_runtime_suspend(&pdev->dev);
 
-	clk_disable_unprepare(i2s->clk_sys);
-
 	return 0;
 }
 
-- 
2.11.0

  parent reply	other threads:[~2017-10-06 14:52 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-06 14:52 [PATCH v2 0/2] ASoC: img-i2s-out: Add power management Ed Blake
2017-10-06 14:52 ` [PATCH v2 1/2] ASoC: img-i2s-out: Add suspend / resume handling Ed Blake
2017-10-09  8:49   ` Applied "ASoC: img-i2s-out: Add suspend / resume handling" to the asoc tree Mark Brown
2017-10-06 14:52 ` Ed Blake [this message]
2017-10-09  8:49   ` Applied "ASoC: img-i2s-out: Add control of sys clock to runtime PM" " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171006145228.13529-3-ed.blake@sondrel.com \
    --to=ed.blake@sondrel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox