From: Ed Blake <ed.blake@sondrel.com>
To: lgirdwood@gmail.com, broonie@kernel.org
Cc: alsa-devel@alsa-project.org, Ed Blake <ed.blake@sondrel.com>
Subject: [PATCH v2 1/2] ASoC: img-spdif-out: Add suspend / resume handling
Date: Fri, 6 Oct 2017 15:56:06 +0100 [thread overview]
Message-ID: <20171006145607.13709-2-ed.blake@sondrel.com> (raw)
In-Reply-To: <20171006145607.13709-1-ed.blake@sondrel.com>
Implement suspend and resume callbacks to save and restore register
state, to support platforms where the power is disabled during suspend.
In future the driver could be converted to use regmap which would
simplify the suspend and resume code.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
---
Changes in v2:
- Changed from ASoC specific pm callbacks to device ones
---
sound/soc/img/img-spdif-out.c | 44 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/sound/soc/img/img-spdif-out.c b/sound/soc/img/img-spdif-out.c
index 416aa5786b93..1808a5542fd1 100644
--- a/sound/soc/img/img-spdif-out.c
+++ b/sound/soc/img/img-spdif-out.c
@@ -47,6 +47,9 @@ struct img_spdif_out {
struct snd_dmaengine_dai_dma_data dma_data;
struct device *dev;
struct reset_control *rst;
+ u32 suspend_ctl;
+ u32 suspend_csl;
+ u32 suspend_csh;
};
static int img_spdif_out_runtime_suspend(struct device *dev)
@@ -414,6 +417,46 @@ static int img_spdif_out_dev_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int img_spdif_out_suspend(struct device *dev)
+{
+ struct img_spdif_out *spdif = dev_get_drvdata(dev);
+ int ret;
+
+ if (pm_runtime_status_suspended(dev)) {
+ ret = img_spdif_out_runtime_resume(dev);
+ if (ret)
+ return ret;
+ }
+
+ spdif->suspend_ctl = img_spdif_out_readl(spdif, IMG_SPDIF_OUT_CTL);
+ spdif->suspend_csl = img_spdif_out_readl(spdif, IMG_SPDIF_OUT_CSL);
+ spdif->suspend_csh = img_spdif_out_readl(spdif, IMG_SPDIF_OUT_CSH_UV);
+
+ img_spdif_out_runtime_suspend(dev);
+
+ return 0;
+}
+
+static int img_spdif_out_resume(struct device *dev)
+{
+ struct img_spdif_out *spdif = dev_get_drvdata(dev);
+ int ret;
+
+ ret = img_spdif_out_runtime_resume(dev);
+ if (ret)
+ return ret;
+
+ img_spdif_out_writel(spdif, spdif->suspend_ctl, IMG_SPDIF_OUT_CTL);
+ img_spdif_out_writel(spdif, spdif->suspend_csl, IMG_SPDIF_OUT_CSL);
+ img_spdif_out_writel(spdif, spdif->suspend_csh, IMG_SPDIF_OUT_CSH_UV);
+
+ if (pm_runtime_status_suspended(dev))
+ img_spdif_out_runtime_suspend(dev);
+
+ return 0;
+}
+#endif
static const struct of_device_id img_spdif_out_of_match[] = {
{ .compatible = "img,spdif-out" },
{}
@@ -423,6 +466,7 @@ MODULE_DEVICE_TABLE(of, img_spdif_out_of_match);
static const struct dev_pm_ops img_spdif_out_pm_ops = {
SET_RUNTIME_PM_OPS(img_spdif_out_runtime_suspend,
img_spdif_out_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(img_spdif_out_suspend, img_spdif_out_resume)
};
static struct platform_driver img_spdif_out_driver = {
--
2.11.0
next prev parent reply other threads:[~2017-10-06 14:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-06 14:56 [PATCH v2 0/2] dma: img-spdif-out: Add power management Ed Blake
2017-10-06 14:56 ` Ed Blake [this message]
2017-10-09 8:49 ` Applied "ASoC: img-spdif-out: Add suspend / resume handling" to the asoc tree Mark Brown
2017-10-06 14:56 ` [PATCH v2 2/2] ASoC: img-spdif-out: Add control of sys clock to runtime PM Ed Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171006145607.13709-2-ed.blake@sondrel.com \
--to=ed.blake@sondrel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox