alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Vinod Koul <vinod.koul@intel.com>
To: Naveen M <naveen.m@intel.com>
Cc: alsa-devel@alsa-project.org, tiwai@suse.de,
	liam.r.girdwood@linux.intel.com, broonie@kernel.org,
	Sathya Prakash M R <sathya.prakash.m.r@intel.com>,
	pierre-louis.bossart@intel.com
Subject: Re: [PATCH] ASoC: Intel: kbl: Modify Headset map for Multi-Playback
Date: Fri, 3 Nov 2017 15:44:57 +0530	[thread overview]
Message-ID: <20171103101457.GL3187@localhost> (raw)
In-Reply-To: <20171103084834.GA7349@nm-B85M-D3Hnaveen.m@intel.com>

On Fri, Nov 03, 2017 at 02:18:34PM +0530, Naveen M wrote:
> On Fri, Nov 03, 2017 at 01:51:00PM +0530, Vinod Koul wrote:
> > On Fri, Nov 03, 2017 at 08:58:17AM +0530, Naveen Manohar wrote:
> > > Current topology for Headset resulted in unwanted pop noise,
> > > while switching from spk->hs at the start of Headset Playback.
> > 
> > what is the reason for the pop ?
> > 
> There is an artifact observed at the start of the stream, which is not
> seen earlier with mixin-mixout dsp module, through which data was
> passing-through.
> 
> > > Modified topology to fix the same.
> > 
> > how does that fix it, sorry am quite unclear about that part
> > 
> Only for headset playback pipe, we re-introduced the mixin-mixout which
> was there earlier. This does not fix the problem but removes regression
> (pop-noise in headset playback) introduced by earlier
> commit-ID:0b06122fc8d0949a0aa7b817d98e031104802611

Then please mention that in the log. IIUC you should say it fixes the wrong
path in commit 0b06122fc8d0 ("ASoC: Intel: kbl: Add map for new DAIs for
Multi-Playback & Echo Ref") which resulted in pop noise.

> 
> > > This modification also requires headset route to be updated.
> > 
> > that seems to be the only change here, so not sure I follow the changes dont
> > for this
> >
> As the topology was modified to earlier path, earlier route change was
> reverted for headset playback.
> 
> > > 
> > > Signed-off-by: Naveen Manohar <naveen.m@intel.com>
> > > Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
> > > ---
> > >  sound/soc/intel/boards/kbl_rt5663_max98927.c        | 2 +-
> > >  sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c | 2 +-
> > >  2 files changed, 2 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/sound/soc/intel/boards/kbl_rt5663_max98927.c b/sound/soc/intel/boards/kbl_rt5663_max98927.c
> > > index 6f9a8bc..6dcad0a 100644
> > > --- a/sound/soc/intel/boards/kbl_rt5663_max98927.c
> > > +++ b/sound/soc/intel/boards/kbl_rt5663_max98927.c
> > > @@ -101,7 +101,7 @@ enum {
> > >  	{ "ssp0 Tx", NULL, "spk_out" },
> > >  
> > >  	{ "AIF Playback", NULL, "ssp1 Tx" },
> > > -	{ "ssp1 Tx", NULL, "hs_out" },
> > > +	{ "ssp1 Tx", NULL, "codec1_out" },
> > >  
> > >  	{ "hs_in", NULL, "ssp1 Rx" },
> > >  	{ "ssp1 Rx", NULL, "AIF Capture" },
> > > diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> > > index 6072164..271ae3c 100644
> > > --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> > > +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> > > @@ -109,7 +109,7 @@ enum {
> > >  	{ "ssp0 Tx", NULL, "spk_out" },
> > >  
> > >  	{ "AIF Playback", NULL, "ssp1 Tx" },
> > > -	{ "ssp1 Tx", NULL, "hs_out" },
> > > +	{ "ssp1 Tx", NULL, "codec1_out" },
> > >  
> > >  	{ "hs_in", NULL, "ssp1 Rx" },
> > >  	{ "ssp1 Rx", NULL, "AIF Capture" },
> > > -- 
> > > 1.9.1
> > > 
> > 
> > -- 
> > ~Vinod
> 
> -- 

-- 
~Vinod

  reply	other threads:[~2017-11-03 10:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-03  3:28 [PATCH] ASoC: Intel: kbl: Modify Headset map for Multi-Playback Naveen Manohar
2017-11-03  8:21 ` Vinod Koul
2017-11-03  8:48   ` Naveen M
2017-11-03  8:48   ` [alsa-devel] " Naveen M
2017-11-03 10:14     ` Vinod Koul [this message]
2017-11-16 19:28 ` Applied "ASoC: Intel: kbl: Modify map for Headset Playback to fix pop-noise" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171103101457.GL3187@localhost \
    --to=vinod.koul@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=naveen.m@intel.com \
    --cc=pierre-louis.bossart@intel.com \
    --cc=sathya.prakash.m.r@intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).