Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Vasily Khoruzhick <anarsoul@gmail.com>
To: "Liam Girdwood" <lgirdwood@gmail.com>,
	"Mark Brown" <broonie@kernel.org>,
	"Maxime Ripard" <maxime.ripard@free-electrons.com>,
	"Chen-Yu Tsai" <wens@csie.org>,
	"Marcus Cooper" <codekipper@gmail.com>,
	"Mylène Josserand" <mylene.josserand@free-electrons.com>,
	alsa-devel@alsa-project.org,
	linux-arm-kernel@lists.infradead.org
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Subject: [PATCH 8/9] arm64: dts: allwinner: a64: Add nodes necessary for analog sound support
Date: Sun,  3 Dec 2017 12:41:56 -0800	[thread overview]
Message-ID: <20171203204157.20829-9-anarsoul@gmail.com> (raw)
In-Reply-To: <20171203204157.20829-1-anarsoul@gmail.com>

Add nodes for i2s, digital and analog parts of audiocodec on A64

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 52 +++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index d783d164b9c3..504f16e3d92d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -112,6 +112,28 @@
 		method = "smc";
 	};
 
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SUN50i Audio Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,mclk-fs = <512>;
+		simple-audio-card,aux-devs = <&codec_analog>;
+		simple-audio-card,routing =
+				"Left DAC", "AIF1 Slot 0 Left",
+				"Right DAC", "AIF1 Slot 0 Right";
+		status = "disabled";
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&dai>;
+		};
+
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
@@ -382,6 +404,30 @@
 			};
 		};
 
+		dai: dai@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-acodec-i2s";
+			reg = <0x01c22c00 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_CODEC>;
+			reset-names = "rst";
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22e00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-codec";
+			reg = <0x01c22e00 0x600>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "bus", "mod";
+			status = "disabled";
+		};
+
 		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -563,6 +609,12 @@
 			#reset-cells = <1>;
 		};
 
+		codec_analog: codec-analog@1f015c0 {
+			compatible = "allwinner,sun50i-a64-codec-analog";
+			reg = <0x01f015c0 0x4>;
+			status = "disabled";
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun50i-a64-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
-- 
2.15.0

  parent reply	other threads:[~2017-12-03 20:42 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-03 20:41 [PATCH 0/9] Add audiocodec support for A64 SoC Vasily Khoruzhick
2017-12-03 20:41 ` [PATCH 1/9] ASoC: sun4i-i2s: Add quirk to handle fixed WSS Vasily Khoruzhick
2017-12-04  0:43   ` Chen-Yu Tsai
2017-12-03 20:41 ` [PATCH 2/9] ASoC: sun4i-i2s: Add compatibility with A64 codec I2S Vasily Khoruzhick
2017-12-04  6:42   ` Code Kipper
2017-12-04  7:34     ` Vasily Khoruzhick
2017-12-05  8:01       ` Maxime Ripard
2017-12-05 23:04         ` Vasily Khoruzhick
2017-12-06 15:27           ` Maxime Ripard
2017-12-07  9:21       ` Code Kipper
2017-12-07  9:30         ` Chen-Yu Tsai
2017-12-07 22:48         ` Vasily Khoruzhick
2017-12-08  6:40           ` Code Kipper
2017-12-08 22:16             ` Vasily Khoruzhick
2017-12-03 20:41 ` [PATCH 3/9] ASoC: sun8i-codec: Add quirk to specify aif1_lrck_div value Vasily Khoruzhick
2017-12-04  7:23   ` Code Kipper
2017-12-04  7:38   ` Chen-Yu Tsai
2017-12-04  8:26     ` Chen-Yu Tsai
2017-12-03 20:41 ` [PATCH 4/9] ASoC: sun8i-codec: Add support for A64 SoC Vasily Khoruzhick
2017-12-05  8:04   ` Maxime Ripard
2017-12-05 23:17     ` Vasily Khoruzhick
2017-12-06 15:32       ` Maxime Ripard
2017-12-06 15:48         ` Mark Brown
2017-12-06 18:53           ` Maxime Ripard
2017-12-06 19:13             ` Mark Brown
2017-12-03 20:41 ` [PATCH 5/9] ASoC: sun8i-codec-analog: Use callbacks to add headphones and lineout outputs Vasily Khoruzhick
2017-12-03 20:41 ` [PATCH 6/9] ASoC: sun8i-codec-analog: Add component driver field to quirks structure Vasily Khoruzhick
2017-12-03 20:41 ` [PATCH 7/9] ASoC: sun8i-codec-analog: Add support for A64 SoC Vasily Khoruzhick
2017-12-03 20:41 ` Vasily Khoruzhick [this message]
2017-12-03 20:41 ` [PATCH 9/9] arm64: dts: allwinner: a64: Enable sound on Pine64 and SoPine Vasily Khoruzhick
2017-12-05  3:24   ` Chen-Yu Tsai
2017-12-09 19:54     ` Vasily Khoruzhick

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171203204157.20829-9-anarsoul@gmail.com \
    --to=anarsoul@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=codekipper@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mylene.josserand@free-electrons.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox