Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Cc: ALSA ML <alsa-devel@alsa-project.org>,
	Mark Brown <broonie@kernel.org>, Takashi Iwai <tiwai@suse.de>,
	Liam Girdwood <liam.r.girdwood@linux.intel.com>,
	Vinod Koul <vinod.koul@intel.com>,
	Patches Audi o <patches.audio@intel.com>,
	mturquette@baylibre.com, linux-clk@vger.kernel.org
Subject: Re: [alsa-devel] [PATCH v6 1/6] ASoC: Intel: Skylake: Add ssp clock driver
Date: Tue, 2 Jan 2018 15:39:29 -0800	[thread overview]
Message-ID: <20180102233929.GO7997@codeaurora.org> (raw)
In-Reply-To: <1514306696-7062-2-git-send-email-sriramx.periyasamy@intel.com>

On 12/26, Sriram Periyasamy wrote:
> diff --git a/sound/soc/intel/skylake/skl-ssp-clk.c b/sound/soc/intel/skylake/skl-ssp-clk.c
> new file mode 100644
> index 000000000000..bb828f285b16
> --- /dev/null
> +++ b/sound/soc/intel/skylake/skl-ssp-clk.c
> @@ -0,0 +1,432 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright(c) 2015-17 Intel Corporation

Does this also go into the // part? I thought just the tag was
with // comment style.

> +
> +static int skl_clk_set_rate(struct clk_hw *hw, unsigned long rate,
> +					unsigned long parent_rate)
> +{
> +	struct skl_clk *clkdev = to_skl_clk(hw);
> +	struct skl_clk_rate_cfg_table *rcfg;
> +	int clk_type;
> +
> +	if (!rate)
> +		return -EINVAL;
> +
> +	if (__clk_is_enabled(hw->clk))

We have CLK_SET_RATE_GATE for this.

> +		return -EBUSY;
> +
> +	rcfg = skl_get_rate_cfg(clkdev->pdata->ssp_clks[clkdev->id].rate_cfg,
> +							rate);
> +	if (!rcfg)
> +		return -EINVAL;
> +
> +	clk_type = skl_get_clk_type(clkdev->id);
> +	if (clk_type < 0)
> +		return clk_type;
> +
> +	skl_fill_clk_ipc(rcfg, clk_type);
> +	clkdev->rate = rate;
> +
> +	return 0;
> +}
> +
> +static unsigned long skl_clk_recalc_rate(struct clk_hw *hw,
> +				unsigned long parent_rate)
> +{
> +	struct skl_clk *clkdev = to_skl_clk(hw);
> +
> +	if (clkdev->rate)
> +		return clkdev->rate;
> +
> +	return 0;
> +}
> +
> +/* Not supported by clk driver. Implemented to satisfy clk fw */
> +long skl_clk_round_rate(struct clk_hw *hw, unsigned long rate,
> +				unsigned long *parent_rate)
> +{
> +	return rate;
> +}
> +
> +/*
> + * prepare/unprepare are used instead of enable/disable as IPC will be sent
> + * in non-atomic context.
> + */
> +static const struct clk_ops skl_clk_ops = {
> +	.prepare = skl_clk_prepare,
> +	.unprepare = skl_clk_unprepare,
> +	.set_rate = skl_clk_set_rate,
> +	.round_rate = skl_clk_round_rate,
> +	.recalc_rate = skl_clk_recalc_rate,
> +};

Otherwise looks good.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply	other threads:[~2018-01-02 23:39 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-26 16:44 [alsa-devel] [PATCH v6 0/6] ASoC: Intel: Skylake: Add a clk driver to enable ssp clks early Sriram Periyasamy
2017-12-26 16:44 ` [alsa-devel] [PATCH v6 1/6] ASoC: Intel: Skylake: Add ssp clock driver Sriram Periyasamy
2018-01-02 23:39   ` Stephen Boyd [this message]
2018-01-03  3:06     ` Vinod Koul
2018-01-03 11:42     ` Mark Brown
2017-12-26 16:44 ` [alsa-devel] [PATCH v6 2/6] ASoC: Intel: Skylake: Add extended I2S config blob support in Clock driver Sriram Periyasamy
2017-12-26 16:44 ` [alsa-devel] [PATCH v6 3/6] ASoC: Intel: kbl: Enable mclk and ssp sclk early Sriram Periyasamy
2017-12-26 16:44 ` [alsa-devel] [PATCH v6 4/6] ASoC: Intel: eve: " Sriram Periyasamy
2017-12-26 16:44 ` [alsa-devel] [PATCH v6 5/6] ASoC: Intel: Skylake: Make DSP replies more human readable Sriram Periyasamy
2017-12-26 16:44 ` [alsa-devel] [PATCH v6 6/6] ASoC: Intel: Skylake: Add FW reply for MCLK/SCLK IPC Sriram Periyasamy
2018-01-02 10:43 ` [alsa-devel] [PATCH v6 0/6] ASoC: Intel: Skylake: Add a clk driver to enable ssp clks early Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180102233929.GO7997@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=patches.audio@intel.com \
    --cc=sriramx.periyasamy@intel.com \
    --cc=tiwai@suse.de \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox