From: Ladislav Michl <ladis@linux-mips.org>
To: alsa-devel@alsa-project.org
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
anish kumar <yesanishhere@gmail.com>
Subject: [PATCH 0/7] Let Atmel use simple-audio-card
Date: Tue, 30 Jan 2018 12:06:04 +0100 [thread overview]
Message-ID: <20180130110604.GA18123@lenoch> (raw)
Alexandre,
following patchset is sent as a bare minimum I need to use
MAX9867 codec in master mode on AT91SAM9G20 based board.
Codec's MCLK is driven by PCK0 and SSC is wired as follows:
RK0 <-- BCLK
RF0 <-- LRCLK
TD0 --> SDIN
RD0 <-- SDOUT
Following DT framgment was used:
i2c-gpio-0 {
codec: max9867@18 {
compatible = "maxim,max9867";
reg = <0x18>;
#sound-dai-cells = <0>;
};
};
sound {
compatible = "simple-audio-card";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pck0_as_mck>;
simple-audio-card,name = "simear4-max9867";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&codec_dai>;
simple-audio-card,frame-master = <&codec_dai>;
simple-audio-card,routing =
"LINE_IN", "Line In Jack",
"Speaker", "HPOUT";
simple-audio-card,widgets =
"Line", "Line In Jack",
"Speaker", "Speaker";
cpu_dai: simple-audio-card,cpu {
sound-dai = <&ssc0>;
};
codec_dai: simple-audio-card,codec {
sound-dai = <&codec>;
clocks = <&pck0>;
clock-frequency = <12384000>;
};
};
&ssc0 {
status = "okay";
pinctrl-0 = <&pinctrl_board_ssc0_tx &pinctrl_ssc0_rx>;
atmel,clk-from-rk-pin;
#sound-dai-cells = <0>;
};
Codec code itself seems to be unused since it was merged and I'm
wondering whenever it worked at all. A comment from codec author
would help a lot, just to be sure I did not break anything.
By no means this code is ready to be merged (only except those patches
with commit log and after carefull consideration :)), I'm posting it as
a base for discussion.
Thank you,
ladis
Ladislav Michl (7):
ASoC: atmel: Remove redundant dev_err() call in probe function
ASoC: atmel_ssc_dai: Fix TCMR settings in I2S slave mode
ASoC: simple_card_utils: Set clock frequency
ASoC: max9867: Show Kconfig entry
ASoC: max9867: Calculate LRCLK divider
ASoC: max9867: Fix BSEL value in master mode.
ASoC: max9867: Take chip out of shutdown
sound/soc/atmel/atmel-classd.c | 7 +--
sound/soc/atmel/atmel-pdmic.c | 7 +--
sound/soc/atmel/atmel_ssc_dai.c | 2 +-
sound/soc/codecs/Kconfig | 3 +-
sound/soc/codecs/max9867.c | 110 +++-------------------------------
sound/soc/generic/simple-card-utils.c | 4 ++
6 files changed, 19 insertions(+), 114 deletions(-)
--
2.15.1
next reply other threads:[~2018-01-30 11:06 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-30 11:06 Ladislav Michl [this message]
2018-01-30 11:06 ` [PATCH 1/7] ASoC: atmel: Remove redundant dev_err() call in probe function Ladislav Michl
2018-02-27 16:54 ` Alexandre Belloni
2018-02-27 17:13 ` Nicolas Ferre
2018-03-01 18:06 ` Applied "ASoC: atmel: Remove redundant dev_err() call in probe function" to the asoc tree Mark Brown
2018-01-30 11:08 ` [PATCH 2/7] ASoC: atmel_ssc_dai: Fix TCMR settings in I2S slave mode Ladislav Michl
2018-02-27 17:09 ` Alexandre Belloni
2018-02-27 18:50 ` Ladislav Michl
2018-01-30 11:08 ` [PATCH 3/7] ASoC: simple_card_utils: Set clock frequency Ladislav Michl
2018-02-27 17:19 ` Alexandre Belloni
2018-01-30 11:09 ` [PATCH 4/7] ASoC: max9867: Show Kconfig entry Ladislav Michl
2018-03-01 18:06 ` Applied "ASoC: max9867: Show Kconfig entry" to the asoc tree Mark Brown
2018-01-30 11:10 ` [PATCH 5/7] ASoC: max9867: Calculate LRCLK divider Ladislav Michl
2018-01-30 11:10 ` [PATCH 6/7] ASoC: max9867: Fix BSEL value in master mode Ladislav Michl
2018-02-27 17:23 ` Alexandre Belloni
2018-02-27 19:03 ` Ladislav Michl
2018-02-28 10:00 ` Alexandre Belloni
2018-02-28 10:23 ` Ladislav Michl
2018-02-28 10:28 ` Alexandre Belloni
2018-01-30 11:11 ` [PATCH 7/7] ASoC: max9867: Take chip out of shutdown Ladislav Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180130110604.GA18123@lenoch \
--to=ladis@linux-mips.org \
--cc=alexandre.belloni@free-electrons.com \
--cc=alsa-devel@alsa-project.org \
--cc=ckeepax@opensource.cirrus.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=nicolas.ferre@microchip.com \
--cc=yesanishhere@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).