From: Hans de Goede <hdegoede@redhat.com>
To: Mark Brown <broonie@kernel.org>, Bard Liao <bardliao@realtek.com>,
Oder Chiou <oder_chiou@realtek.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
alsa-devel@alsa-project.org, Carlo Caione <carlo@endlessm.com>,
Takashi Iwai <tiwai@suse.com>
Subject: [PATCH v3 08/22] ASoC: rt5651: Add rt5651_jack_inserted() helper
Date: Sun, 4 Mar 2018 15:35:56 +0100 [thread overview]
Message-ID: <20180304143610.21125-9-hdegoede@redhat.com> (raw)
In-Reply-To: <20180304143610.21125-1-hdegoede@redhat.com>
Add rt5651_jack_inserted() helper to get the jack-detect switch status,
This is a preparation patch for rewriting the jack type-detection to
make it more reliable.
Tested-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
sound/soc/codecs/rt5651.c | 45 ++++++++++++++++++++++++++++-----------------
1 file changed, 28 insertions(+), 17 deletions(-)
diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c
index 9f522a0364f4..3870c0f3b30f 100644
--- a/sound/soc/codecs/rt5651.c
+++ b/sound/soc/codecs/rt5651.c
@@ -1597,6 +1597,31 @@ static bool rt5651_micbias1_ovcd(struct snd_soc_component *component)
return (val & RT5651_MB1_OC_CLR);
}
+static bool rt5651_jack_inserted(struct snd_soc_component *component)
+{
+ struct rt5651_priv *rt5651 = snd_soc_component_get_drvdata(component);
+ int val;
+
+ val = snd_soc_component_read32(component, RT5651_INT_IRQ_ST);
+ dev_dbg(component->dev, "irq status %#04x\n", val);
+
+ switch (rt5651->jd_src) {
+ case RT5651_JD1_1:
+ val &= 0x1000;
+ break;
+ case RT5651_JD1_2:
+ val &= 0x2000;
+ break;
+ case RT5651_JD2:
+ val &= 0x4000;
+ break;
+ default:
+ break;
+ }
+
+ return val == 0;
+}
+
static irqreturn_t rt5651_irq(int irq, void *data)
{
struct rt5651_priv *rt5651 = data;
@@ -1928,27 +1953,13 @@ static void rt5651_jack_detect_work(struct work_struct *work)
{
struct rt5651_priv *rt5651 =
container_of(work, struct rt5651_priv, jack_detect_work.work);
-
- int report, val = 0;
+ int report, jack_inserted;
if (!rt5651->component)
return;
- switch (rt5651->jd_src) {
- case RT5651_JD1_1:
- val = snd_soc_component_read32(rt5651->component, RT5651_INT_IRQ_ST) & 0x1000;
- break;
- case RT5651_JD1_2:
- val = snd_soc_component_read32(rt5651->component, RT5651_INT_IRQ_ST) & 0x2000;
- break;
- case RT5651_JD2:
- val = snd_soc_component_read32(rt5651->component, RT5651_INT_IRQ_ST) & 0x4000;
- break;
- default:
- break;
- }
-
- report = rt5651_jack_detect(rt5651->component, !val);
+ jack_inserted = rt5651_jack_inserted(rt5651->component);
+ report = rt5651_jack_detect(rt5651->component, jack_inserted);
snd_soc_jack_report(rt5651->hp_jack, report, SND_JACK_HEADSET);
}
--
2.14.3
next prev parent reply other threads:[~2018-03-04 14:36 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-04 14:35 [PATCH v3 00/22] ASoC: rt5651: jack-detect fixes and improvements Hans de Goede
2018-03-04 14:35 ` [PATCH v3 01/22] ASoC: rt5651: Make rt5651_apply_properties() private Hans de Goede
2018-03-07 14:14 ` Applied "ASoC: rt5651: Make rt5651_apply_properties() private" to the asoc tree Mark Brown
2018-03-04 14:35 ` [PATCH v3 02/22] ASoC: rt5651: Add devicetree-bindings for jack-detect Hans de Goede
2018-03-07 14:14 ` Applied "ASoC: rt5651: Add devicetree-bindings for jack-detect" to the asoc tree Mark Brown
2018-03-04 14:35 ` [PATCH v3 03/22] ASoC: rt5651: Configure jack-detect source through a device-property Hans de Goede
2018-03-07 12:34 ` Mark Brown
2018-03-07 13:49 ` Hans de Goede
2018-03-07 14:28 ` Mark Brown
2018-03-07 14:14 ` Applied "ASoC: rt5651: Configure jack-detect source through a device-property" to the asoc tree Mark Brown
2018-03-04 14:35 ` [PATCH v3 04/22] ASoC: rt5651: Allow specifying over-current threshold through a device-property Hans de Goede
2018-03-07 14:14 ` Applied "ASoC: rt5651: Allow specifying over-current threshold through a device-property" to the asoc tree Mark Brown
2018-03-04 14:35 ` [PATCH v3 05/22] ASoC: rt5651: Allow specifying the OVCD scale-factor through a device-property Hans de Goede
2018-03-07 14:14 ` Applied "ASoC: rt5651: Allow specifying the OVCD scale-factor through a device-property" to the asoc tree Mark Brown
2018-03-04 14:35 ` [PATCH v3 06/22] ASoC: rt5651: Enable sticky mode for OVCD Hans de Goede
2018-03-04 14:35 ` [PATCH v3 07/22] ASoC: rt5651: Enable Platform Clock during jack-type detect Hans de Goede
2018-03-04 14:35 ` Hans de Goede [this message]
2018-03-04 14:35 ` [PATCH v3 09/22] ASoC: rt5651: Rewrite jack-type detection Hans de Goede
2018-03-07 14:13 ` Applied "ASoC: rt5651: Rewrite jack-type detection" to the asoc tree Mark Brown
2018-03-04 14:35 ` [PATCH v3 10/22] ASoC: Intel: bytcr_rt5651: Not being able to find the codec ACPI-dev is an error Hans de Goede
2018-03-07 14:13 ` Applied "ASoC: Intel: bytcr_rt5651: Not being able to find the codec ACPI-dev is an error" to the asoc tree Mark Brown
2018-03-04 14:35 ` [PATCH v3 11/22] ASoC: Intel: bytcr_rt5651: Pass jack-src info via device-properties Hans de Goede
2018-03-07 14:22 ` Applied "ASoC: Intel: bytcr_rt5651: Pass jack-src info via device-properties" to the asoc tree Mark Brown
2018-03-04 14:36 ` [PATCH v3 12/22] ASoC: Intel: bytcr_rt5651: Actually honor the DMIC_EN quirk if specified Hans de Goede
2018-03-07 14:22 ` Applied "ASoC: Intel: bytcr_rt5651: Actually honor the DMIC_EN quirk if specified" to the asoc tree Mark Brown
2018-03-04 14:36 ` [PATCH v3 13/22] ASoC: Intel: bytcr_rt5651: Only create jack if we have a jack-detect source Hans de Goede
2018-03-07 14:22 ` Applied "ASoC: Intel: bytcr_rt5651: Only create jack if we have a jack-detect source" to the asoc tree Mark Brown
2018-03-04 14:36 ` [PATCH v3 14/22] ASoC: Intel: bytcr_rt5651: Add quirk micbias OVCD configuration Hans de Goede
2018-03-07 14:22 ` Applied "ASoC: Intel: bytcr_rt5651: Add quirk micbias OVCD configuration" to the asoc tree Mark Brown
2018-03-04 14:36 ` [PATCH v3 15/22] ASoC: Intel: bytcr_rt5651: Configure PLL1 before using it Hans de Goede
2018-03-04 14:36 ` [PATCH v3 16/22] ASoC: Intel: bytcr_rt5651: Drop snd_soc_dai_set_bclk_ratio() call Hans de Goede
2018-03-04 14:36 ` [PATCH v3 17/22] ASoC: Intel: bytcr_rt5651: Rename IN3_MAP to IN1_HS_IN3_MAP Hans de Goede
2018-03-04 14:36 ` [PATCH v3 18/22] ASoC: Intel: bytcr_rt5651: Add new IN2_HS_IN3 input map and a quirk using it Hans de Goede
2018-03-04 14:36 ` [PATCH v3 19/22] ASoC: Intel: bytcr_rt5651: Add support for Bay Trail CR / SSP0 using boards Hans de Goede
2018-03-07 14:21 ` Applied "ASoC: Intel: bytcr_rt5651: Add support for Bay Trail CR / SSP0 using boards" to the asoc tree Mark Brown
2018-03-09 23:30 ` [PATCH v3 19/22] ASoC: Intel: bytcr_rt5651: Add support for Bay Trail CR / SSP0 using boards Pierre-Louis Bossart
2018-03-11 18:19 ` Hans de Goede
2018-03-12 23:26 ` Pierre-Louis Bossart
2018-03-04 14:36 ` [PATCH v3 20/22] ASoC: Intel: bytcr_rt5651: Add quirk for the VIOS LTH17 laptop Hans de Goede
2018-03-04 14:36 ` [PATCH v3 21/22] ASoC: Intel: bytcr_rt5651: Change defaults to enable jack-detect, analog mics Hans de Goede
2018-03-04 14:36 ` [PATCH v3 22/22] ASoC: Intel: bytcr_rt5651: Select RCCLK on init() Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180304143610.21125-9-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=alsa-devel@alsa-project.org \
--cc=bardliao@realtek.com \
--cc=broonie@kernel.org \
--cc=carlo@endlessm.com \
--cc=oder_chiou@realtek.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).