Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Robert Rosengren <robert.rosengren@axis.com>
To: Lars-Peter Clausen <lars@metafoo.de>, alsa-devel@alsa-project.org
Cc: Danny Smith <dannys@axis.com>
Subject: [PATCH 2/2] ASoC: adau17x1: Do not reload dsp-fw if samplerate has not changed
Date: Tue,  3 Apr 2018 10:05:35 +0200	[thread overview]
Message-ID: <20180403080535.6109-2-robertr@axis.com> (raw)
In-Reply-To: <20180403080535.6109-1-robertr@axis.com>

From: Danny Smith <dannys@axis.com>

Reloading fw causes an audiable popping sound, we can avoid this
by not reloading if the samplerate is the same as before.

Signed-off-by: Danny Smith <dannys@axis.com>
---
 sound/soc/codecs/adau17x1.c | 39 ++++++++++++++++++++++++---------------
 1 file changed, 24 insertions(+), 15 deletions(-)

diff --git a/sound/soc/codecs/adau17x1.c b/sound/soc/codecs/adau17x1.c
index 5636b9522462..3c28b7191ecd 100644
--- a/sound/soc/codecs/adau17x1.c
+++ b/sound/soc/codecs/adau17x1.c
@@ -840,25 +840,34 @@ int adau17x1_setup_firmware(struct adau *adau, unsigned int rate)
 	int ret;
 	int dspsr, dsp_run;
 
-	ret = regmap_read(adau->regmap, ADAU17X1_DSP_SAMPLING_RATE, &dspsr);
-	if (ret)
-		return ret;
+	/* Check if sample rate is the same as before. If it is there is no
+	 * point in performing the below steps as the call to
+	 * sigmadsp_setup(...) will return directly when it finds the sample
+	 * rate to be the same as before. By checking this we can prevent an
+	 * audiable popping noise which occours when toggling DSP_RUN.
+	 */
+	if (adau->sigmadsp->current_samplerate != rate) {
+		ret = regmap_read(adau->regmap, ADAU17X1_DSP_SAMPLING_RATE,
+			&dspsr);
+		if (ret)
+			return ret;
 
-	ret = regmap_read(adau->regmap, ADAU17X1_DSP_RUN, &dsp_run);
-	if (ret)
-		return ret;
+		ret = regmap_read(adau->regmap, ADAU17X1_DSP_RUN, &dsp_run);
+		if (ret)
+			return ret;
 
-	regmap_write(adau->regmap, ADAU17X1_DSP_ENABLE, 1);
-	regmap_write(adau->regmap, ADAU17X1_DSP_SAMPLING_RATE, 0xf);
-	regmap_write(adau->regmap, ADAU17X1_DSP_RUN, 0);
+		regmap_write(adau->regmap, ADAU17X1_DSP_ENABLE, 1);
+		regmap_write(adau->regmap, ADAU17X1_DSP_SAMPLING_RATE, 0xf);
+		regmap_write(adau->regmap, ADAU17X1_DSP_RUN, 0);
 
-	ret = sigmadsp_setup(adau->sigmadsp, rate);
-	if (ret) {
-		regmap_write(adau->regmap, ADAU17X1_DSP_ENABLE, 0);
-		return ret;
+		ret = sigmadsp_setup(adau->sigmadsp, rate);
+		if (ret) {
+			regmap_write(adau->regmap, ADAU17X1_DSP_ENABLE, 0);
+			return ret;
+		}
+		regmap_write(adau->regmap, ADAU17X1_DSP_SAMPLING_RATE, dspsr);
+		regmap_write(adau->regmap, ADAU17X1_DSP_RUN, dsp_run);
 	}
-	regmap_write(adau->regmap, ADAU17X1_DSP_SAMPLING_RATE, dspsr);
-	regmap_write(adau->regmap, ADAU17X1_DSP_RUN, dsp_run);
 
 	return 0;
 }
-- 
2.11.0

  reply	other threads:[~2018-04-03  8:05 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-03  8:05 [PATCH 1/2] ASoC: adau17x1: Handling of DSP_RUN register during fw setup Robert Rosengren
2018-04-03  8:05 ` Robert Rosengren [this message]
2018-04-05 15:33   ` [PATCH 2/2] ASoC: adau17x1: Do not reload dsp-fw if samplerate has not changed Lars-Peter Clausen
2018-04-05 15:44 ` [PATCH 1/2] ASoC: adau17x1: Handling of DSP_RUN register during fw setup Lars-Peter Clausen
2018-04-11  5:16   ` Robert Rosengren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180403080535.6109-2-robertr@axis.com \
    --to=robert.rosengren@axis.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=dannys@axis.com \
    --cc=lars@metafoo.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox