Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Mack <daniel@zonque.org>
To: lgirdwood@gmail.com, broonie@kernel.org,
	kuninori.morimoto.gx@renesas.com
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	robert.jarzmik@free.fr, Daniel Mack <daniel@zonque.org>
Subject: [PATCH v2] ASoC: simple-card: set cpu dai clk in hw_params
Date: Wed, 30 May 2018 21:45:56 +0200	[thread overview]
Message-ID: <20180530194556.407-1-daniel@zonque.org> (raw)

The simple-card driver currently accepts a clock node in the cpu dai
sub-node and only uses it as an alternative to the
'system-clock-frequency' property to get the current frequency.

This patch adds another use of the passed clock node. If mclk-fs is
specified, the clocks in cpu and codec dai sub-nodes will be set to
the calculated rate (stream rate * mclk_fs) in hw_params.

This allows platforms to pass tuneable clocks as phandle that will
automatically be set to the right rates.

Signed-off-by: Daniel Mack <daniel@zonque.org>
---

This is the only patch that's left from the series of three that I
posted earlier.

v1 → v2:

 * Apply the setting to both the codec and the cpu dai
 * Check for errors from clk_set_rate() and avoid unnecessary rate
   changes.

 .../devicetree/bindings/sound/simple-card.txt       |  5 +++++
 sound/soc/generic/simple-card.c                     | 21 +++++++++++++++++++++
 2 files changed, 26 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
index 17c13e74667d..a4c72d09cd45 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.txt
+++ b/Documentation/devicetree/bindings/sound/simple-card.txt
@@ -86,6 +86,11 @@ Optional CPU/CODEC subnodes properties:
 					  in dai startup() and disabled with
 					  clk_disable_unprepare() in dai
 					  shutdown().
+					  If a clock is specified and a
+					  multiplication factor is given with
+					  mclk-fs, the clock will be set to the
+					  calculated mclk frequency when the
+					  stream starts.
 - system-clock-direction-out		: specifies clock direction as 'out' on
 					  initialization. It is useful for some aCPUs with
 					  fixed clocks.
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index 6959a74a6f49..4a516c428b3d 100644
--- a/sound/soc/generic/simple-card.c
+++ b/sound/soc/generic/simple-card.c
@@ -135,6 +135,18 @@ static void asoc_simple_card_shutdown(struct snd_pcm_substream *substream)
 	asoc_simple_card_clk_disable(&dai_props->codec_dai);
 }
 
+static int asoc_simple_set_clk_rate(struct asoc_simple_dai *simple_dai,
+				    unsigned long rate)
+{
+	if (!simple_dai->clk)
+		return 0;
+
+	if (clk_get_rate(simple_dai->clk) == rate)
+		return 0;
+
+	return clk_set_rate(simple_dai->clk, rate);
+}
+
 static int asoc_simple_card_hw_params(struct snd_pcm_substream *substream,
 				      struct snd_pcm_hw_params *params)
 {
@@ -154,6 +166,15 @@ static int asoc_simple_card_hw_params(struct snd_pcm_substream *substream,
 
 	if (mclk_fs) {
 		mclk = params_rate(params) * mclk_fs;
+
+		ret = asoc_simple_set_clk_rate(&dai_props->codec_dai, mclk);
+		if (ret < 0)
+			return ret;
+
+		ret = asoc_simple_set_clk_rate(&dai_props->cpu_dai, mclk);
+		if (ret < 0)
+			return ret;
+
 		ret = snd_soc_dai_set_sysclk(codec_dai, 0, mclk,
 					     SND_SOC_CLOCK_IN);
 		if (ret && ret != -ENOTSUPP)
-- 
2.14.3

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

             reply	other threads:[~2018-05-30 19:46 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-30 19:45 Daniel Mack [this message]
2018-06-01 11:05 ` Applied "ASoC: simple-card: set cpu dai clk in hw_params" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180530194556.407-1-daniel@zonque.org \
    --to=daniel@zonque.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=lgirdwood@gmail.com \
    --cc=robert.jarzmik@free.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox