From: Hans de Goede <hdegoede@redhat.com>
To: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.de>, Hans de Goede <hdegoede@redhat.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Subject: [PATCH 00/14] conf/ucm: bytcr-rt5651: Various improvements + long-name profiles addition
Date: Fri, 20 Jul 2018 09:27:27 +0200 [thread overview]
Message-ID: <20180720072741.4632-1-hdegoede@redhat.com> (raw)
Hi All,
Here is a set of patches to the bytcr-rt5651 UCM profiles. This series
also adds a bunch of long-name profiles so that users automatically
only see the inputs / outputs which their device actually has.
The long-names are based on the long-names set by the kernel after
the rt5651 patch series which is currently queued in -next:
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git/log/?h=for-next
With these UCM profile patches and the kernel changes in place all
inputs and outputs as well as jack-detect will work 100% OOTB on
supported bytcr-rt5651 devices, without the user needing to do any
manual config or mixer settings.
Regards,
Hans
next reply other threads:[~2018-07-20 7:27 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-20 7:27 Hans de Goede [this message]
2018-07-20 7:27 ` [PATCH 01/14] conf/ucm: bytcr-rt5645: Use the generic bytcr/PlatformEnableSeq.conf Hans de Goede
2018-07-20 7:27 ` [PATCH 02/14] conf/ucm: bytcr-rt5651: Add support for boards using SSP0 Hans de Goede
2018-07-20 7:27 ` [PATCH 03/14] conf/ucm: bytcr-rt5651: Do not use both DAC1 and HPVOL inputs for HP Hans de Goede
2018-07-20 7:27 ` [PATCH 04/14] conf/ucm: bytcr-rt5651: Configure all volumes at 0dB Hans de Goede
2018-07-20 13:48 ` Pierre-Louis Bossart
2018-08-08 9:02 ` Hans de Goede
2018-07-20 7:27 ` [PATCH 05/14] conf/ucm: bytcr-rt5651: Start with all outputs and inputs disabled Hans de Goede
2018-07-20 7:27 ` [PATCH 06/14] conf/ucm: bytcr-rt5651: Change Speaker/Headphone en/disable sequences to fix switching Hans de Goede
2018-07-20 7:27 ` [PATCH 07/14] conf/ucm: bytcr-rt5651: Use generic SSP enable + disable sequence Hans de Goede
2018-07-20 13:49 ` Pierre-Louis Bossart
2018-08-08 9:03 ` Hans de Goede
2018-07-20 7:27 ` [PATCH 08/14] conf/ucm: bytcr-rt5651: Fix ADC and Mic capture volumes Hans de Goede
2018-07-20 7:27 ` [PATCH 09/14] conf/ucm: bytcr-rt5651: Add support for mic input on various pins Hans de Goede
2018-07-20 7:27 ` [PATCH 10/14] conf/ucm: bytcr-rt5651: Split into 1 .conf file per input / output Hans de Goede
2018-07-20 7:27 ` [PATCH 11/14] conf/ucm: bytcr-rt5651: Add mono speaker output profile Hans de Goede
2018-07-20 7:27 ` [PATCH 12/14] conf/ucm: bytcr-rt5651: Add long-name UCM profiles Hans de Goede
2018-07-20 7:27 ` [PATCH 13/14] conf/ucm: bytcr-rt5651: Add bytcr-rt5651-mono-spk-in2-mic-hp-swapped config Hans de Goede
2018-07-20 7:27 ` [PATCH 14/14] conf/ucm: bytcr-rt5640: Improve human readable input/output names Hans de Goede
2018-07-20 13:51 ` [PATCH 00/14] conf/ucm: bytcr-rt5651: Various improvements + long-name profiles addition Pierre-Louis Bossart
2018-07-22 8:52 ` Takashi Iwai
2018-08-05 16:46 ` Takashi Iwai
2018-08-06 7:41 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180720072741.4632-1-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=alsa-devel@alsa-project.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).