From: Hans de Goede <hdegoede@redhat.com>
To: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.de>, Hans de Goede <hdegoede@redhat.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Subject: [PATCH 01/14] conf/ucm: bytcr-rt5645: Use the generic bytcr/PlatformEnableSeq.conf
Date: Fri, 20 Jul 2018 09:27:28 +0200 [thread overview]
Message-ID: <20180720072741.4632-2-hdegoede@redhat.com> (raw)
In-Reply-To: <20180720072741.4632-1-hdegoede@redhat.com>
Use the generic Intel SSP bytcr/PlatformEnableSeq.conf file, it is
identical to all the cset statements this commit removes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
src/conf/ucm/chtrt5645/HiFi.conf | 116 +------------------------------
1 file changed, 1 insertion(+), 115 deletions(-)
diff --git a/src/conf/ucm/chtrt5645/HiFi.conf b/src/conf/ucm/chtrt5645/HiFi.conf
index e81866cf..d993f6ae 100644
--- a/src/conf/ucm/chtrt5645/HiFi.conf
+++ b/src/conf/ucm/chtrt5645/HiFi.conf
@@ -11,121 +11,7 @@ SectionVerb {
EnableSequence [
cdev "hw:chtrt5645"
- # media mixer settings
- # compress
- cset "name='media0_in Gain 0 Switch' on"
- cset "name='media0_in Gain 0 Volume' 0"
-
- # normal
- cset "name='media1_in Gain 0 Switch' on"
- cset "name='media1_in Gain 0 Volume' 0"
- # swm loopback
- cset "name='media2_in Gain 0 Switch' off"
- cset "name='media2_in Gain 0 Volume' 0%"
- # deep buffer
- cset "name='media3_in Gain 0 Switch' on"
- cset "name='media3_in Gain 0 Volume' 0"
-
- cset "name='media0_out mix 0 media0_in Switch' on"
- cset "name='media0_out mix 0 media1_in Switch' on"
- cset "name='media0_out mix 0 media2_in Switch' off"
- cset "name='media0_out mix 0 media3_in Switch' on"
-
- cset "name='media1_out mix 0 media0_in Switch' off"
- cset "name='media1_out mix 0 media1_in Switch' off"
- cset "name='media1_out mix 0 media2_in Switch' off"
- cset "name='media1_out mix 0 media3_in Switch' off"
-
- cset "name='pcm0_in Gain 0 Switch' on"
- cset "name='pcm0_in Gain 0 Volume' 0"
-
- cset "name='pcm1_in Gain 0 Switch' off"
- cset "name='pcm1_in Gain 0 Volume' 0%"
-
- # codec0_out settings (used if ssp2 is connected to aif1)
- cset "name='codec_out0 mix 0 codec_in0 Switch' off"
- cset "name='codec_out0 mix 0 codec_in1 Switch' off"
- cset "name='codec_out0 mix 0 media_loop1_in Switch' off"
- cset "name='codec_out0 mix 0 media_loop2_in Switch' off"
- cset "name='codec_out0 mix 0 pcm0_in Switch' on"
- cset "name='codec_out0 mix 0 pcm1_in Switch' off"
- cset "name='codec_out0 mix 0 sprot_loop_in Switch' off"
- cset "name='codec_out0 Gain 0 Switch' on"
- cset "name='codec_out0 Gain 0 Volume' 0"
-
- # modem_out settings (used if ssp0 is connected to aif2)
- cset "name='modem_out mix 0 codec_in0 Switch' off"
- cset "name='modem_out mix 0 codec_in1 Switch' off"
- cset "name='modem_out mix 0 media_loop1_in Switch' off"
- cset "name='modem_out mix 0 media_loop2_in Switch' off"
- cset "name='modem_out mix 0 pcm0_in Switch' on"
- cset "name='modem_out mix 0 pcm1_in Switch' off"
- cset "name='modem_out mix 0 sprot_loop_in Switch' off"
- cset "name='modem_out Gain 0 Switch' on"
- cset "name='modem_out Gain 0 Volume' 0"
-
- # input settings
- # pcm1_out settings
-
- # input used when SSP2 is connected
- cset "name='codec_in0 Gain 0 Switch' on"
- cset "name='codec_in0 Gain 0 Volume' 0"
-
- # input used when SSP0 is connected
- cset "name='modem_in Gain 0 Switch' on"
- cset "name='modem_in Gain 0 Volume' 0"
-
- cset "name='pcm1_out mix 0 codec_in0 Switch' on"
- cset "name='pcm1_out mix 0 modem_in Switch' on"
- cset "name='pcm1_out mix 0 codec_in1 Switch' off"
- cset "name='pcm1_out mix 0 media_loop1_in Switch' off"
- cset "name='pcm1_out mix 0 media_loop2_in Switch' off"
- cset "name='pcm1_out mix 0 pcm0_in Switch' off"
- cset "name='pcm1_out mix 0 pcm1_in Switch' off"
- cset "name='pcm1_out mix 0 sprot_loop_in Switch' off"
-
- cset "name='pcm1_out Gain 0 Switch' on"
- cset "name='pcm1_out Gain 0 Volume' 0"
-
- # disable codec_out1
- cset "name='codec_out1 mix 0 codec_in0 Switch' off"
- cset "name='codec_out1 mix 0 codec_in1 Switch' off"
- cset "name='codec_out1 mix 0 media_loop1_in Switch' off"
- cset "name='codec_out1 mix 0 media_loop2_in Switch' off"
- cset "name='codec_out1 mix 0 pcm0_in Switch' off"
- cset "name='codec_out1 mix 0 pcm1_in Switch' off"
- cset "name='codec_out1 mix 0 sprot_loop_in Switch' off"
- cset "name='codec_out1 Gain 0 Switch' off"
- cset "name='codec_out1 Gain 0 Volume' 0%"
-
- # disable codec_in1
- cset "name='codec_in1 Gain 0 Switch' off"
- cset "name='codec_in1 Gain 0 Volume' 0%"
-
- # disable all loops
- cset "name='media_loop1_out mix 0 codec_in0 Switch' off"
- cset "name='media_loop1_out mix 0 codec_in1 Switch' off"
- cset "name='media_loop1_out mix 0 media_loop1_in Switch' off"
- cset "name='media_loop1_out mix 0 media_loop2_in Switch' off"
- cset "name='media_loop1_out mix 0 pcm0_in Switch' off"
- cset "name='media_loop1_out mix 0 pcm1_in Switch' off"
- cset "name='media_loop1_out mix 0 sprot_loop_in Switch' off"
-
- cset "name='media_loop2_out mix 0 codec_in0 Switch' off"
- cset "name='media_loop2_out mix 0 codec_in1 Switch' off"
- cset "name='media_loop2_out mix 0 media_loop1_in Switch' off"
- cset "name='media_loop2_out mix 0 media_loop2_in Switch' off"
- cset "name='media_loop2_out mix 0 pcm0_in Switch' off"
- cset "name='media_loop2_out mix 0 pcm1_in Switch' off"
- cset "name='media_loop2_out mix 0 sprot_loop_in Switch' off"
-
- cset "name='sprot_loop_out mix 0 codec_in0 Switch' off"
- cset "name='sprot_loop_out mix 0 codec_in1 Switch' off"
- cset "name='sprot_loop_out mix 0 media_loop1_in Switch' off"
- cset "name='sprot_loop_out mix 0 media_loop2_in Switch' off"
- cset "name='sprot_loop_out mix 0 pcm0_in Switch' off"
- cset "name='sprot_loop_out mix 0 pcm1_in Switch' off"
- cset "name='sprot_loop_out mix 0 sprot_loop_in Switch' off"
+ <bytcr/PlatformEnableSeq.conf>
# Output Configuration
cset "name='DAC1 L Mux' IF1 DAC"
--
2.17.1
next prev parent reply other threads:[~2018-07-20 7:27 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-20 7:27 [PATCH 00/14] conf/ucm: bytcr-rt5651: Various improvements + long-name profiles addition Hans de Goede
2018-07-20 7:27 ` Hans de Goede [this message]
2018-07-20 7:27 ` [PATCH 02/14] conf/ucm: bytcr-rt5651: Add support for boards using SSP0 Hans de Goede
2018-07-20 7:27 ` [PATCH 03/14] conf/ucm: bytcr-rt5651: Do not use both DAC1 and HPVOL inputs for HP Hans de Goede
2018-07-20 7:27 ` [PATCH 04/14] conf/ucm: bytcr-rt5651: Configure all volumes at 0dB Hans de Goede
2018-07-20 13:48 ` Pierre-Louis Bossart
2018-08-08 9:02 ` Hans de Goede
2018-07-20 7:27 ` [PATCH 05/14] conf/ucm: bytcr-rt5651: Start with all outputs and inputs disabled Hans de Goede
2018-07-20 7:27 ` [PATCH 06/14] conf/ucm: bytcr-rt5651: Change Speaker/Headphone en/disable sequences to fix switching Hans de Goede
2018-07-20 7:27 ` [PATCH 07/14] conf/ucm: bytcr-rt5651: Use generic SSP enable + disable sequence Hans de Goede
2018-07-20 13:49 ` Pierre-Louis Bossart
2018-08-08 9:03 ` Hans de Goede
2018-07-20 7:27 ` [PATCH 08/14] conf/ucm: bytcr-rt5651: Fix ADC and Mic capture volumes Hans de Goede
2018-07-20 7:27 ` [PATCH 09/14] conf/ucm: bytcr-rt5651: Add support for mic input on various pins Hans de Goede
2018-07-20 7:27 ` [PATCH 10/14] conf/ucm: bytcr-rt5651: Split into 1 .conf file per input / output Hans de Goede
2018-07-20 7:27 ` [PATCH 11/14] conf/ucm: bytcr-rt5651: Add mono speaker output profile Hans de Goede
2018-07-20 7:27 ` [PATCH 12/14] conf/ucm: bytcr-rt5651: Add long-name UCM profiles Hans de Goede
2018-07-20 7:27 ` [PATCH 13/14] conf/ucm: bytcr-rt5651: Add bytcr-rt5651-mono-spk-in2-mic-hp-swapped config Hans de Goede
2018-07-20 7:27 ` [PATCH 14/14] conf/ucm: bytcr-rt5640: Improve human readable input/output names Hans de Goede
2018-07-20 13:51 ` [PATCH 00/14] conf/ucm: bytcr-rt5651: Various improvements + long-name profiles addition Pierre-Louis Bossart
2018-07-22 8:52 ` Takashi Iwai
2018-08-05 16:46 ` Takashi Iwai
2018-08-06 7:41 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180720072741.4632-2-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=alsa-devel@alsa-project.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).