From: Hans de Goede <hdegoede@redhat.com>
To: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.de>, Hans de Goede <hdegoede@redhat.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Subject: [PATCH 04/14] conf/ucm: bytcr-rt5651: Configure all volumes at 0dB
Date: Fri, 20 Jul 2018 09:27:31 +0200 [thread overview]
Message-ID: <20180720072741.4632-5-hdegoede@redhat.com> (raw)
In-Reply-To: <20180720072741.4632-1-hdegoede@redhat.com>
The volumes are taken from this commit:
https://github.com/plbossart/UCM/commit/753e2430cd0e6cafbf10c6b29b689dbd32ac5250
That commit also adds line-in support, so it has not been
taken in its entirety.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf b/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf
index 5dcb11e6..d6e8e48d 100644
--- a/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf
+++ b/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf
@@ -117,16 +117,13 @@ SectionDefaults [
cset "name='sprot_loop_out mix 0 sprot_loop_in Switch' off"
# default state
- cset "name='ADC Capture Volume' 126"
cset "name='HPO MIX DAC1 Switch' on"
cset "name='HPO MIX HPVOL Switch' off"
- cset "name='HP Playback Volume' 0"
cset "name='HPO L Playback Switch' off"
cset "name='HPO R Playback Switch' off"
cset "name='HPOVOL L Switch' on"
cset "name='HPOVOL R Switch' on"
cset "name='IF1 ASRC Switch' on"
- cset "name='IN Capture Volume' 27"
cset "name='IN2 Boost' 1"
cset "name='IN1 Boost' 1"
cset "name='LOUT L Playback Switch' on"
@@ -145,6 +142,13 @@ SectionDefaults [
cset "name='Headphone Switch' off"
cset "name='Speaker Switch' off"
+ # volumes for 0dB
+ cset "name='OUT Playback Volume' 31"
+ cset "name='HP Playback Volume' 31"
+ cset "name='IN Capture Volume' 23"
+ cset "name='ADC Capture Volume' 47"
+ cset "name='DAC1 Playback Volume' 175"
+
# input
cset "name='Stereo1 ADC L1 Mux' ADC"
cset "name='Stereo1 ADC R1 Mux' ADC"
--
2.17.1
next prev parent reply other threads:[~2018-07-20 7:27 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-20 7:27 [PATCH 00/14] conf/ucm: bytcr-rt5651: Various improvements + long-name profiles addition Hans de Goede
2018-07-20 7:27 ` [PATCH 01/14] conf/ucm: bytcr-rt5645: Use the generic bytcr/PlatformEnableSeq.conf Hans de Goede
2018-07-20 7:27 ` [PATCH 02/14] conf/ucm: bytcr-rt5651: Add support for boards using SSP0 Hans de Goede
2018-07-20 7:27 ` [PATCH 03/14] conf/ucm: bytcr-rt5651: Do not use both DAC1 and HPVOL inputs for HP Hans de Goede
2018-07-20 7:27 ` Hans de Goede [this message]
2018-07-20 13:48 ` [PATCH 04/14] conf/ucm: bytcr-rt5651: Configure all volumes at 0dB Pierre-Louis Bossart
2018-08-08 9:02 ` Hans de Goede
2018-07-20 7:27 ` [PATCH 05/14] conf/ucm: bytcr-rt5651: Start with all outputs and inputs disabled Hans de Goede
2018-07-20 7:27 ` [PATCH 06/14] conf/ucm: bytcr-rt5651: Change Speaker/Headphone en/disable sequences to fix switching Hans de Goede
2018-07-20 7:27 ` [PATCH 07/14] conf/ucm: bytcr-rt5651: Use generic SSP enable + disable sequence Hans de Goede
2018-07-20 13:49 ` Pierre-Louis Bossart
2018-08-08 9:03 ` Hans de Goede
2018-07-20 7:27 ` [PATCH 08/14] conf/ucm: bytcr-rt5651: Fix ADC and Mic capture volumes Hans de Goede
2018-07-20 7:27 ` [PATCH 09/14] conf/ucm: bytcr-rt5651: Add support for mic input on various pins Hans de Goede
2018-07-20 7:27 ` [PATCH 10/14] conf/ucm: bytcr-rt5651: Split into 1 .conf file per input / output Hans de Goede
2018-07-20 7:27 ` [PATCH 11/14] conf/ucm: bytcr-rt5651: Add mono speaker output profile Hans de Goede
2018-07-20 7:27 ` [PATCH 12/14] conf/ucm: bytcr-rt5651: Add long-name UCM profiles Hans de Goede
2018-07-20 7:27 ` [PATCH 13/14] conf/ucm: bytcr-rt5651: Add bytcr-rt5651-mono-spk-in2-mic-hp-swapped config Hans de Goede
2018-07-20 7:27 ` [PATCH 14/14] conf/ucm: bytcr-rt5640: Improve human readable input/output names Hans de Goede
2018-07-20 13:51 ` [PATCH 00/14] conf/ucm: bytcr-rt5651: Various improvements + long-name profiles addition Pierre-Louis Bossart
2018-07-22 8:52 ` Takashi Iwai
2018-08-05 16:46 ` Takashi Iwai
2018-08-06 7:41 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180720072741.4632-5-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=alsa-devel@alsa-project.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).