From: Hans de Goede <hdegoede@redhat.com>
To: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.de>, Hans de Goede <hdegoede@redhat.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Subject: [PATCH 05/14] conf/ucm: bytcr-rt5651: Start with all outputs and inputs disabled
Date: Fri, 20 Jul 2018 09:27:32 +0200 [thread overview]
Message-ID: <20180720072741.4632-6-hdegoede@redhat.com> (raw)
In-Reply-To: <20180720072741.4632-1-hdegoede@redhat.com>
Start with all switches disabled, so that e.g. the
LOUT L/R Playback Switches are not left enabled when starting with
headphones plugged in.
This fixes the platform clock being kept on by these in some cases.
While at also move the IN? Boost and IF1 ASRC Switch lines around
a bit to match the order from https://github.com/plbossart/UCM so
the profiles can be more easily compared.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf b/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf
index d6e8e48d..4bcc6a6c 100644
--- a/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf
+++ b/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf
@@ -123,14 +123,13 @@ SectionDefaults [
cset "name='HPO R Playback Switch' off"
cset "name='HPOVOL L Switch' on"
cset "name='HPOVOL R Switch' on"
- cset "name='IF1 ASRC Switch' on"
- cset "name='IN2 Boost' 1"
- cset "name='IN1 Boost' 1"
- cset "name='LOUT L Playback Switch' on"
cset "name='LOUT MIX DAC L1 Switch' on"
cset "name='LOUT MIX DAC R1 Switch' on"
- cset "name='LOUT R Playback Switch' on"
- cset "name='OUT Playback Volume' 33"
+ cset "name='IN1 Boost' 1"
+ cset "name='IN2 Boost' 1"
+ cset "name='IF1 ASRC Switch' on"
+ cset "name='LOUT L Playback Switch' off"
+ cset "name='LOUT R Playback Switch' off"
cset "name='Stereo DAC MIXL DAC L1 Switch' on"
cset "name='Stereo DAC MIXR DAC R1 Switch' on"
cset "name='Stereo1 ADC MIXR ADC1 Switch' on"
@@ -160,4 +159,7 @@ SectionDefaults [
cset "name='RECMIXR BST3 Switch' off"
cset "name='RECMIXL BST2 Switch' off"
cset "name='RECMIXR BST2 Switch' off"
+ cset "name='Headset Mic Switch' off"
+ cset "name='Internal Mic Switch' off"
+ cset "name='Line In Switch' off"
]
--
2.17.1
next prev parent reply other threads:[~2018-07-20 7:27 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-20 7:27 [PATCH 00/14] conf/ucm: bytcr-rt5651: Various improvements + long-name profiles addition Hans de Goede
2018-07-20 7:27 ` [PATCH 01/14] conf/ucm: bytcr-rt5645: Use the generic bytcr/PlatformEnableSeq.conf Hans de Goede
2018-07-20 7:27 ` [PATCH 02/14] conf/ucm: bytcr-rt5651: Add support for boards using SSP0 Hans de Goede
2018-07-20 7:27 ` [PATCH 03/14] conf/ucm: bytcr-rt5651: Do not use both DAC1 and HPVOL inputs for HP Hans de Goede
2018-07-20 7:27 ` [PATCH 04/14] conf/ucm: bytcr-rt5651: Configure all volumes at 0dB Hans de Goede
2018-07-20 13:48 ` Pierre-Louis Bossart
2018-08-08 9:02 ` Hans de Goede
2018-07-20 7:27 ` Hans de Goede [this message]
2018-07-20 7:27 ` [PATCH 06/14] conf/ucm: bytcr-rt5651: Change Speaker/Headphone en/disable sequences to fix switching Hans de Goede
2018-07-20 7:27 ` [PATCH 07/14] conf/ucm: bytcr-rt5651: Use generic SSP enable + disable sequence Hans de Goede
2018-07-20 13:49 ` Pierre-Louis Bossart
2018-08-08 9:03 ` Hans de Goede
2018-07-20 7:27 ` [PATCH 08/14] conf/ucm: bytcr-rt5651: Fix ADC and Mic capture volumes Hans de Goede
2018-07-20 7:27 ` [PATCH 09/14] conf/ucm: bytcr-rt5651: Add support for mic input on various pins Hans de Goede
2018-07-20 7:27 ` [PATCH 10/14] conf/ucm: bytcr-rt5651: Split into 1 .conf file per input / output Hans de Goede
2018-07-20 7:27 ` [PATCH 11/14] conf/ucm: bytcr-rt5651: Add mono speaker output profile Hans de Goede
2018-07-20 7:27 ` [PATCH 12/14] conf/ucm: bytcr-rt5651: Add long-name UCM profiles Hans de Goede
2018-07-20 7:27 ` [PATCH 13/14] conf/ucm: bytcr-rt5651: Add bytcr-rt5651-mono-spk-in2-mic-hp-swapped config Hans de Goede
2018-07-20 7:27 ` [PATCH 14/14] conf/ucm: bytcr-rt5640: Improve human readable input/output names Hans de Goede
2018-07-20 13:51 ` [PATCH 00/14] conf/ucm: bytcr-rt5651: Various improvements + long-name profiles addition Pierre-Louis Bossart
2018-07-22 8:52 ` Takashi Iwai
2018-08-05 16:46 ` Takashi Iwai
2018-08-06 7:41 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180720072741.4632-6-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=alsa-devel@alsa-project.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).