From: Ladislav Michl <ladis@linux-mips.org>
To: alsa-devel@alsa-project.org
Cc: Mark Brown <broonie@kernel.org>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
anish kumar <yesanishhere@gmail.com>
Subject: [PATCH 2/5] ASoC: max9867: Fix power management
Date: Fri, 23 Nov 2018 15:27:29 +0100 [thread overview]
Message-ID: <20181123142729.GC7347@lenoch> (raw)
In-Reply-To: <20181123142507.GA7347@lenoch>
Move device enable to probe function. Doing that from prepare
callback allows only DAC to be enabled.
While here move suspend and resume functions to more common place.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
sound/soc/codecs/max9867.c | 62 +++++++++++++++-----------------------
sound/soc/codecs/max9867.h | 2 +-
2 files changed, 26 insertions(+), 38 deletions(-)
diff --git a/sound/soc/codecs/max9867.c b/sound/soc/codecs/max9867.c
index 1cda54b59854..07a8205b211a 100644
--- a/sound/soc/codecs/max9867.c
+++ b/sound/soc/codecs/max9867.c
@@ -248,17 +248,6 @@ static int max9867_dai_hw_params(struct snd_pcm_substream *substream,
return 0;
}
-static int max9867_prepare(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_component *component = dai->component;
- struct max9867_priv *max9867 = snd_soc_component_get_drvdata(component);
-
- regmap_update_bits(max9867->regmap, MAX9867_PWRMAN,
- MAX9867_SHTDOWN_MASK, MAX9867_SHTDOWN_MASK);
- return 0;
-}
-
static int max9867_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_component *component = dai->component;
@@ -361,7 +350,6 @@ static int max9867_dai_set_fmt(struct snd_soc_dai *codec_dai,
static const struct snd_soc_dai_ops max9867_dai_ops = {
.set_fmt = max9867_dai_set_fmt,
.set_sysclk = max9867_set_dai_sysclk,
- .prepare = max9867_prepare,
.digital_mute = max9867_mute,
.hw_params = max9867_dai_hw_params,
};
@@ -392,27 +380,6 @@ static struct snd_soc_dai_driver max9867_dai[] = {
}
};
-#ifdef CONFIG_PM_SLEEP
-static int max9867_suspend(struct device *dev)
-{
- struct max9867_priv *max9867 = dev_get_drvdata(dev);
-
- /* Drop down to power saving mode when system is suspended */
- regmap_update_bits(max9867->regmap, MAX9867_PWRMAN,
- MAX9867_SHTDOWN_MASK, ~MAX9867_SHTDOWN_MASK);
- return 0;
-}
-
-static int max9867_resume(struct device *dev)
-{
- struct max9867_priv *max9867 = dev_get_drvdata(dev);
-
- regmap_update_bits(max9867->regmap, MAX9867_PWRMAN,
- MAX9867_SHTDOWN_MASK, MAX9867_SHTDOWN_MASK);
- return 0;
-}
-#endif
-
static const struct snd_soc_component_driver max9867_component = {
.controls = max9867_snd_controls,
.num_controls = ARRAY_SIZE(max9867_snd_controls),
@@ -491,19 +458,40 @@ static int max9867_i2c_probe(struct i2c_client *i2c,
}
ret = regmap_read(max9867->regmap, MAX9867_REVISION, ®);
if (ret < 0) {
- dev_err(&i2c->dev, "Failed to read: %d\n", ret);
+ dev_err(&i2c->dev, "Failed to read revision: %d\n", ret);
return ret;
}
dev_info(&i2c->dev, "device revision: %x\n", reg);
- ret = devm_snd_soc_register_component(&i2c->dev, &max9867_component,
- max9867_dai, ARRAY_SIZE(max9867_dai));
+ ret = regmap_update_bits(max9867->regmap, MAX9867_PWRMAN,
+ MAX9867_SHTDOWN, MAX9867_SHTDOWN);
if (ret < 0) {
- dev_err(&i2c->dev, "Failed to register component: %d\n", ret);
+ dev_err(&i2c->dev, "Failed to enable: %d\n", ret);
return ret;
}
+ ret = devm_snd_soc_register_component(&i2c->dev, &max9867_component,
+ max9867_dai, ARRAY_SIZE(max9867_dai));
+ if (ret < 0)
+ dev_err(&i2c->dev, "Failed to register component: %d\n", ret);
return ret;
}
+static int __maybe_unused max9867_suspend(struct device *dev)
+{
+ struct max9867_priv *max9867 = dev_get_drvdata(dev);
+
+ /* Drop down to power saving mode when system is suspended */
+ return regmap_update_bits(max9867->regmap, MAX9867_PWRMAN,
+ MAX9867_SHTDOWN, 0);
+}
+
+static int __maybe_unused max9867_resume(struct device *dev)
+{
+ struct max9867_priv *max9867 = dev_get_drvdata(dev);
+
+ return regmap_update_bits(max9867->regmap, MAX9867_PWRMAN,
+ MAX9867_SHTDOWN, MAX9867_SHTDOWN);
+}
+
static const struct i2c_device_id max9867_i2c_id[] = {
{ "max9867", 0 },
{ }
diff --git a/sound/soc/codecs/max9867.h b/sound/soc/codecs/max9867.h
index 55cd9976ff47..d9170850c96e 100644
--- a/sound/soc/codecs/max9867.h
+++ b/sound/soc/codecs/max9867.h
@@ -67,7 +67,7 @@
#define MAX9867_MICCONFIG 0x15
#define MAX9867_MODECONFIG 0x16
#define MAX9867_PWRMAN 0x17
-#define MAX9867_SHTDOWN_MASK (1<<7)
+#define MAX9867_SHTDOWN 0x80
#define MAX9867_REVISION 0xff
#define MAX9867_CACHEREGNUM 10
--
2.19.1
next prev parent reply other threads:[~2018-11-23 14:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-23 14:25 [PATCH 0/5] max9867 driver update Ladislav Michl
2018-11-23 14:27 ` [PATCH 1/5] ASoC: max9867: Fix whitespace Ladislav Michl
2018-11-26 17:20 ` Applied "ASoC: max9867: Fix whitespace" to the asoc tree Mark Brown
2018-11-23 14:27 ` Ladislav Michl [this message]
2018-11-26 12:57 ` [PATCH 2/5] ASoC: max9867: Fix power management Mark Brown
2018-11-27 17:37 ` Ladislav Michl
2018-11-28 9:22 ` Mark Brown
2018-11-23 14:27 ` [PATCH 3/5] ASoC: max9867: Calculate LRCLK divider Ladislav Michl
2018-11-23 14:28 ` [PATCH 4/5] ASoC: max9867: Fix signal paths Ladislav Michl
2018-11-23 14:28 ` [PATCH 5/5] ASoC: max9867: Add copyright and module author Ladislav Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181123142729.GC7347@lenoch \
--to=ladis@linux-mips.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=yesanishhere@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox