public inbox for alsa-devel@alsa-project.org
 help / color / mirror / Atom feed
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
	wens-jdAy2FN1RRM@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
	be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org,
	Marcus Cooper
	<codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v3 5/9] ASoC: sun4i-i2s: Correct divider calculations
Date: Fri, 21 Dec 2018 16:21:06 +0100	[thread overview]
Message-ID: <20181221152110.17982-6-codekipper@gmail.com> (raw)
In-Reply-To: <20181221152110.17982-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

The clock division circuitry is different on the H3 and later SoCs.
The division of bclk is now based on pll2.

Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 sound/soc/sunxi/sun4i-i2s.c | 82 +++++++++++++++++++++++++------------
 1 file changed, 56 insertions(+), 26 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 93a484d7e228..b31f84787218 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -129,10 +129,10 @@
  * @has_chsel_offset: SoC uses offset for selecting dai operational mode.
  * @reg_offset_txdata: offset of the tx fifo.
  * @sun4i_i2s_regmap: regmap config to use.
- * @mclk_offset: Value by which mclkdiv needs to be adjusted.
- * @bclk_offset: Value by which bclkdiv needs to be adjusted.
  * @fmt_offset: Value by which wss and sr needs to be adjusted.
  * @field_clkdiv_mclk_en: regmap field to enable mclk output.
+ * @field_clkdiv_mclk: regmap field for mclkdiv.
+ * @field_clkdiv_bclk: regmap field for bclkdiv.
  * @field_fmt_wss: regmap field to set word select size.
  * @field_fmt_sr: regmap field to set sample resolution.
  * @field_fmt_bclk: regmap field to set clk polarity.
@@ -153,8 +153,6 @@ struct sun4i_i2s_quirks {
 	bool				has_chsel_offset;
 	unsigned int			reg_offset_txdata;	/* TX FIFO */
 	const struct regmap_config	*sun4i_i2s_regmap;
-	unsigned int			mclk_offset;
-	unsigned int			bclk_offset;
 	unsigned int			fmt_offset;
 
 	/* Register fields for i2s */
@@ -210,7 +208,25 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_bclk_div[] = {
 	{ .div = 8, .val = 3 },
 	{ .div = 12, .val = 4 },
 	{ .div = 16, .val = 5 },
-	/* TODO - extend divide ratio supported by newer SoCs */
+};
+
+static const struct sun4i_i2s_clk_div sun8i_i2s_clk_div[] = {
+	{ .div = 0, .val = 0 },
+	{ .div = 1, .val = 1 },
+	{ .div = 2, .val = 2 },
+	{ .div = 4, .val = 3 },
+	{ .div = 6, .val = 4 },
+	{ .div = 8, .val = 5 },
+	{ .div = 12, .val = 6 },
+	{ .div = 16, .val = 7 },
+	{ .div = 24, .val = 8 },
+	{ .div = 32, .val = 9 },
+	{ .div = 48, .val = 10 },
+	{ .div = 64, .val = 11 },
+	{ .div = 96, .val = 12 },
+	{ .div = 128, .val = 13 },
+	{ .div = 176, .val = 14 },
+	{ .div = 192, .val = 15 },
 };
 
 static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
@@ -222,21 +238,21 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
 	{ .div = 12, .val = 5 },
 	{ .div = 16, .val = 6 },
 	{ .div = 24, .val = 7 },
-	/* TODO - extend divide ratio supported by newer SoCs */
 };
 
 static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
 				  unsigned int oversample_rate,
-				  unsigned int word_size)
+				  unsigned int word_size,
+				  const struct sun4i_i2s_clk_div *bdiv,
+				  unsigned int size)
 {
 	int div = oversample_rate / word_size / 2;
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(sun4i_i2s_bclk_div); i++) {
-		const struct sun4i_i2s_clk_div *bdiv = &sun4i_i2s_bclk_div[i];
-
+	for (i = 0; i < size; i++) {
 		if (bdiv->div == div)
 			return bdiv->val;
+		bdiv++;
 	}
 
 	return -EINVAL;
@@ -245,16 +261,17 @@ static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
 static int sun4i_i2s_get_mclk_div(struct sun4i_i2s *i2s,
 				  unsigned int oversample_rate,
 				  unsigned int module_rate,
-				  unsigned int sampling_rate)
+				  unsigned int sampling_rate,
+				  const struct sun4i_i2s_clk_div *mdiv,
+				  unsigned int size)
 {
 	int div = module_rate / sampling_rate / oversample_rate;
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(sun4i_i2s_mclk_div); i++) {
-		const struct sun4i_i2s_clk_div *mdiv = &sun4i_i2s_mclk_div[i];
-
+	for (i = 0; i < size; i++) {
 		if (mdiv->div == div)
 			return mdiv->val;
+		mdiv++;
 	}
 
 	return -EINVAL;
@@ -319,24 +336,39 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
 		return -EINVAL;
 	}
 
-	bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
-					  word_size);
+	if (i2s->variant->has_fmt_set_lrck_period)
+		bclk_div = sun4i_i2s_get_bclk_div(i2s, clk_rate / rate,
+						  word_size,
+						  sun8i_i2s_clk_div,
+						  ARRAY_SIZE(sun8i_i2s_clk_div));
+	else
+		bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
+						  word_size,
+						  sun4i_i2s_bclk_div,
+						  ARRAY_SIZE(sun4i_i2s_bclk_div));
 	if (bclk_div < 0) {
-		dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div);
+		dev_err(dai->dev, "Unsupported BCLK divider: %d\n",
+			bclk_div);
 		return -EINVAL;
 	}
 
-	mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
-					  clk_rate, rate);
+
+	if (i2s->variant->has_fmt_set_lrck_period)
+		mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+						  clk_rate, rate,
+						  sun8i_i2s_clk_div,
+						  ARRAY_SIZE(sun8i_i2s_clk_div));
+	else
+		mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+						  clk_rate, rate,
+						  sun4i_i2s_mclk_div,
+						  ARRAY_SIZE(sun4i_i2s_mclk_div));
 	if (mclk_div < 0) {
-		dev_err(dai->dev, "Unsupported MCLK divider: %d\n", mclk_div);
+		dev_err(dai->dev, "Unsupported MCLK divider: %d\n",
+			mclk_div);
 		return -EINVAL;
 	}
 
-	/* Adjust the clock division values if needed */
-	bclk_div += i2s->variant->bclk_offset;
-	mclk_div += i2s->variant->mclk_offset;
-
 	regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
 		     SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
 		     SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
@@ -955,8 +987,6 @@ static const struct sun4i_i2s_quirks sun8i_h3_i2s_quirks = {
 	.has_reset		= true,
 	.reg_offset_txdata	= SUN8I_I2S_FIFO_TX_REG,
 	.sun4i_i2s_regmap	= &sun8i_i2s_regmap_config,
-	.mclk_offset		= 1,
-	.bclk_offset		= 2,
 	.fmt_offset		= 3,
 	.has_fmt_set_lrck_period = true,
 	.has_chcfg		= true,
-- 
2.20.1

  parent reply	other threads:[~2018-12-21 15:21 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-21 15:21 [PATCH v3 0/9] ASoC: sun4i-i2s: Updates to the driver codekipper-Re5JQEeQqe8AvxtiuMwx3w
     [not found] ` <20181221152110.17982-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-12-21 15:21   ` [PATCH v3 1/9] ASoC: sun4i-i2s: Adjust regmap settings codekipper-Re5JQEeQqe8AvxtiuMwx3w
     [not found]     ` <20181221152110.17982-2-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-12-21 16:44       ` Chen-Yu Tsai
2018-12-22 22:12         ` Jonas Karlman
     [not found]           ` <DB7PR03MB46813005FFDFC8609F67F111ACB90-qmxCgCjGUkLCt975IqKlAceAHadYHfrlvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2018-12-23  3:16             ` [alsa-devel] " Chen-Yu Tsai
2019-01-09 18:49               ` Mark Brown
2019-01-09 18:46         ` Mark Brown
2018-12-21 15:21   ` [PATCH v3 2/9] ASoC: sun4i-i2s: Add regmap field to sign extend sample codekipper-Re5JQEeQqe8AvxtiuMwx3w
     [not found]     ` <20181221152110.17982-3-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-12-21 17:06       ` Chen-Yu Tsai
2018-12-21 15:21   ` [PATCH v3 3/9] ASoc: sun4i-i2s: Add 20, 24 and 32 bit support codekipper-Re5JQEeQqe8AvxtiuMwx3w
     [not found]     ` <20181221152110.17982-4-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-12-21 16:48       ` Chen-Yu Tsai
     [not found]         ` <CAGb2v67LyDW6kmDrahzLYsY7q9mSJimrZ=jMO3PrPQ=mcxy0qw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-12-21 17:15           ` Chen-Yu Tsai
2018-12-21 15:21   ` [PATCH v3 4/9] ASoC: sun4i-i2s: Fix offset mask codekipper-Re5JQEeQqe8AvxtiuMwx3w
     [not found]     ` <20181221152110.17982-5-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-12-21 16:54       ` Chen-Yu Tsai
2019-01-09 18:50         ` Mark Brown
2018-12-21 15:21   ` codekipper-Re5JQEeQqe8AvxtiuMwx3w [this message]
2018-12-21 15:21   ` [PATCH v3 6/9] ASoC: sun4i-i2s: Add multi-lane functionality codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-12-21 15:21   ` [PATCH v3 7/9] ASoC: sun4i-i2s: Do not divide clocks when slave codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-12-21 15:21   ` [PATCH v3 8/9] ASoC: sun4i-i2s: Add set_tdm_slot functionality codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-12-21 15:21   ` [PATCH v3 9/9] ASoC: sun4i-i2s: Add multichannel functionality codekipper-Re5JQEeQqe8AvxtiuMwx3w

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181221152110.17982-6-codekipper@gmail.com \
    --to=codekipper-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
    --cc=be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=wens-jdAy2FN1RRM@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox