alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Danny Milosavljevic <dannym@scratchpost.org>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Danny Milosavljevic <dannym@scratchpost.org>,
	alsa-devel@alsa-project.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v15 3/8] ASoC: sun4i-codec: Add sun7i_codec_controls, sun7i_codec_codec
Date: Wed, 30 Jan 2019 11:39:39 +0100	[thread overview]
Message-ID: <20190130103945.26692-4-dannym@scratchpost.org> (raw)
In-Reply-To: <20190130103945.26692-1-dannym@scratchpost.org>

Introduce sun7i_codec_controls because some of the controls are different
on Allwinner A20 compared to Allwinner A10.

Also introduce sun7i_codec_codec in order to use sun7i_codec_controls and
make sun7i_codec_quirks use sun7i_codec_codec.

Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
---
 sound/soc/sunxi/sun4i-codec.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 060a40b45..52453c46b 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -686,6 +686,15 @@ static const struct snd_kcontrol_new sun4i_codec_controls[] = {
 		       sun4i_codec_micin_loopback_gain_scale),
 };
 
+static const struct snd_kcontrol_new sun7i_codec_controls[] = {
+	SOC_SINGLE_TLV("Power Amplifier Volume", SUN4I_CODEC_DAC_ACTL,
+		       SUN4I_CODEC_DAC_ACTL_PA_VOL, 0x3F, 0,
+		       sun4i_codec_pa_volume_scale),
+	SOC_SINGLE_TLV("Mic Playback Volume", SUN4I_CODEC_DAC_ACTL,
+		       SUN4I_CODEC_DAC_ACTL_MICG, 7, 0,
+		       sun4i_codec_micin_loopback_gain_scale),
+};
+
 static const struct snd_kcontrol_new sun4i_codec_left_mixer_controls[] = {
 	SOC_DAPM_SINGLE("Left DAC Playback Switch", SUN4I_CODEC_DAC_ACTL,
 			SUN4I_CODEC_DAC_ACTL_LDACLMIXS, 1, 0),
@@ -820,6 +829,19 @@ static const struct snd_soc_component_driver sun4i_codec_codec = {
 	.non_legacy_dai_naming	= 1,
 };
 
+static const struct snd_soc_component_driver sun7i_codec_codec = {
+	.controls		= sun7i_codec_controls,
+	.num_controls		= ARRAY_SIZE(sun7i_codec_controls),
+	.dapm_widgets		= sun4i_codec_codec_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(sun4i_codec_codec_dapm_widgets),
+	.dapm_routes		= sun4i_codec_codec_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(sun4i_codec_codec_dapm_routes),
+	.idle_bias_on		= 1,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
 /*** sun6i Codec ***/
 
 /* mixer controls */
@@ -1500,7 +1522,7 @@ static const struct sun4i_codec_quirks sun6i_a31_codec_quirks = {
 
 static const struct sun4i_codec_quirks sun7i_codec_quirks = {
 	.regmap_config	= &sun7i_codec_regmap_config,
-	.codec		= &sun4i_codec_codec,
+	.codec		= &sun7i_codec_codec,
 	.create_card	= sun4i_codec_create_card,
 	.reg_adc_fifoc	= REG_FIELD(SUN4I_CODEC_ADC_FIFOC, 0, 31),
 	.reg_dac_txdata	= SUN4I_CODEC_DAC_TXDATA,

  parent reply	other threads:[~2019-01-30 14:26 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-30 10:39 [PATCH v15 0/8] ASoC: sun4i-codec: Add Line-In, FM-In, Mic 2 Danny Milosavljevic
2019-01-30 10:39 ` [PATCH v15 1/8] ASoC: sun4i-codec: Add MIC2 Pre-Amplifier, Mic2 input Danny Milosavljevic
2019-02-07 12:16   ` Applied "ASoC: sun4i-codec: Add MIC2 Pre-Amplifier, Mic2 input" to the asoc tree Mark Brown
2019-01-30 10:39 ` [PATCH v15 2/8] ASoC: sun4i-codec: Add Mic Playback Volume Danny Milosavljevic
2019-02-07 12:16   ` Applied "ASoC: sun4i-codec: Add Mic Playback Volume" to the asoc tree Mark Brown
2019-01-30 10:39 ` Danny Milosavljevic [this message]
2019-02-07 12:15   ` Applied "ASoC: sun4i-codec: Add sun7i_codec_controls, sun7i_codec_codec" " Mark Brown
2019-01-30 10:39 ` [PATCH v15 4/8] ASoC: sun4i-codec: Add Mic1 Boost Volume, Mic2 Boost Volume Danny Milosavljevic
2019-02-07 12:15   ` Applied "ASoC: sun4i-codec: Add Mic1 Boost Volume, Mic2 Boost Volume" to the asoc tree Mark Brown
2019-01-30 10:39 ` [PATCH v15 5/8] ASoC: sun4i-codec: Merge sun4i_codec_left_mixer_controls and sun4i_codec_right_mixer_controls into sun4i_codec_mixer_controls Danny Milosavljevic
2019-01-30 10:39 ` [PATCH v15 6/8] ASoC: sun4i-codec: Add Mic1 Playback Switch, Mic2 Playback Switch Danny Milosavljevic
2019-01-30 10:39 ` [PATCH v15 7/8] ASoC: sun4i-codec: Add FM Playback Volume, FM Left, FM Right, FM " Danny Milosavljevic
2019-02-07 12:15   ` Applied "ASoC: sun4i-codec: Add FM Playback Volume, FM Left, FM Right, FM Playback Switch" to the asoc tree Mark Brown
2019-01-30 10:39 ` [PATCH v15 8/8] ASoC: sun4i-codec: Add Line Playback Volume, Line Boost Volume, Line Right, Line Left, Line Playback Switch Danny Milosavljevic
2019-02-07 12:15   ` Applied "ASoC: sun4i-codec: Add Line Playback Volume, Line Boost Volume, Line Right, Line Left, Line Playback Switch" to the asoc tree Mark Brown
2019-02-06 10:40 ` [PATCH v15 0/8] ASoC: sun4i-codec: Add Line-In, FM-In, Mic 2 Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190130103945.26692-4-dannym@scratchpost.org \
    --to=dannym@scratchpost.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.ripard@bootlin.com \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).