From: Danny Milosavljevic <dannym@scratchpost.org>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
Danny Milosavljevic <dannym@scratchpost.org>,
alsa-devel@alsa-project.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v15 4/8] ASoC: sun4i-codec: Add Mic1 Boost Volume, Mic2 Boost Volume
Date: Wed, 30 Jan 2019 11:39:40 +0100 [thread overview]
Message-ID: <20190130103945.26692-5-dannym@scratchpost.org> (raw)
In-Reply-To: <20190130103945.26692-1-dannym@scratchpost.org>
Add Mic1 Boost Volume and Mic2 Boost Volume for Allwinner A10 and for
Allwinner A20.
Those controls are in different registers per chip model, so put the
Allwinner A10 controls and the Allwinner A20 controls into the newly
split sun4i_codec_controls and sun7i_codec_controls, respectively.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
---
sound/soc/sunxi/sun4i-codec.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 52453c46b..9d509ede2 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -95,6 +95,8 @@
#define SUN4I_CODEC_ADC_ACTL_PREG1EN (29)
#define SUN4I_CODEC_ADC_ACTL_PREG2EN (28)
#define SUN4I_CODEC_ADC_ACTL_VMICEN (27)
+#define SUN4I_CODEC_ADC_ACTL_PREG1 (25)
+#define SUN4I_CODEC_ADC_ACTL_PREG2 (23)
#define SUN4I_CODEC_ADC_ACTL_VADCG (20)
#define SUN4I_CODEC_ADC_ACTL_ADCIS (17)
#define SUN4I_CODEC_ADC_ACTL_PA_EN (4)
@@ -111,6 +113,9 @@
/* Microphone controls (sun7i only) */
#define SUN7I_CODEC_AC_MIC_PHONE_CAL (0x3c)
+#define SUN7I_CODEC_AC_MIC_PHONE_CAL_PREG1 (29)
+#define SUN7I_CODEC_AC_MIC_PHONE_CAL_PREG2 (26)
+
/*
* sun6i specific registers
*
@@ -676,6 +681,12 @@ static const struct snd_kcontrol_new sun4i_codec_pa_mute =
static DECLARE_TLV_DB_SCALE(sun4i_codec_pa_volume_scale, -6300, 100, 1);
static DECLARE_TLV_DB_SCALE(sun4i_codec_micin_loopback_gain_scale, -450, 150,
0);
+static DECLARE_TLV_DB_RANGE(sun4i_codec_micin_preamp_gain_scale,
+ 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+ 1, 7, TLV_DB_SCALE_ITEM(3500, 300, 0));
+static DECLARE_TLV_DB_RANGE(sun7i_codec_micin_preamp_gain_scale,
+ 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+ 1, 7, TLV_DB_SCALE_ITEM(2400, 300, 0));
static const struct snd_kcontrol_new sun4i_codec_controls[] = {
SOC_SINGLE_TLV("Power Amplifier Volume", SUN4I_CODEC_DAC_ACTL,
@@ -684,6 +695,12 @@ static const struct snd_kcontrol_new sun4i_codec_controls[] = {
SOC_SINGLE_TLV("Mic Playback Volume", SUN4I_CODEC_DAC_ACTL,
SUN4I_CODEC_DAC_ACTL_MICG, 7, 0,
sun4i_codec_micin_loopback_gain_scale),
+ SOC_SINGLE_TLV("Mic1 Boost Volume", SUN4I_CODEC_ADC_ACTL,
+ SUN4I_CODEC_ADC_ACTL_PREG1, 3, 0,
+ sun4i_codec_micin_preamp_gain_scale),
+ SOC_SINGLE_TLV("Mic2 Boost Volume", SUN4I_CODEC_ADC_ACTL,
+ SUN4I_CODEC_ADC_ACTL_PREG2, 3, 0,
+ sun4i_codec_micin_preamp_gain_scale),
};
static const struct snd_kcontrol_new sun7i_codec_controls[] = {
@@ -693,6 +710,12 @@ static const struct snd_kcontrol_new sun7i_codec_controls[] = {
SOC_SINGLE_TLV("Mic Playback Volume", SUN4I_CODEC_DAC_ACTL,
SUN4I_CODEC_DAC_ACTL_MICG, 7, 0,
sun4i_codec_micin_loopback_gain_scale),
+ SOC_SINGLE_TLV("Mic1 Boost Volume", SUN7I_CODEC_AC_MIC_PHONE_CAL,
+ SUN7I_CODEC_AC_MIC_PHONE_CAL_PREG1, 7, 0,
+ sun7i_codec_micin_preamp_gain_scale),
+ SOC_SINGLE_TLV("Mic2 Boost Volume", SUN7I_CODEC_AC_MIC_PHONE_CAL,
+ SUN7I_CODEC_AC_MIC_PHONE_CAL_PREG2, 7, 0,
+ sun7i_codec_micin_preamp_gain_scale),
};
static const struct snd_kcontrol_new sun4i_codec_left_mixer_controls[] = {
next prev parent reply other threads:[~2019-01-30 14:26 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-30 10:39 [PATCH v15 0/8] ASoC: sun4i-codec: Add Line-In, FM-In, Mic 2 Danny Milosavljevic
2019-01-30 10:39 ` [PATCH v15 1/8] ASoC: sun4i-codec: Add MIC2 Pre-Amplifier, Mic2 input Danny Milosavljevic
2019-02-07 12:16 ` Applied "ASoC: sun4i-codec: Add MIC2 Pre-Amplifier, Mic2 input" to the asoc tree Mark Brown
2019-01-30 10:39 ` [PATCH v15 2/8] ASoC: sun4i-codec: Add Mic Playback Volume Danny Milosavljevic
2019-02-07 12:16 ` Applied "ASoC: sun4i-codec: Add Mic Playback Volume" to the asoc tree Mark Brown
2019-01-30 10:39 ` [PATCH v15 3/8] ASoC: sun4i-codec: Add sun7i_codec_controls, sun7i_codec_codec Danny Milosavljevic
2019-02-07 12:15 ` Applied "ASoC: sun4i-codec: Add sun7i_codec_controls, sun7i_codec_codec" to the asoc tree Mark Brown
2019-01-30 10:39 ` Danny Milosavljevic [this message]
2019-02-07 12:15 ` Applied "ASoC: sun4i-codec: Add Mic1 Boost Volume, Mic2 Boost Volume" " Mark Brown
2019-01-30 10:39 ` [PATCH v15 5/8] ASoC: sun4i-codec: Merge sun4i_codec_left_mixer_controls and sun4i_codec_right_mixer_controls into sun4i_codec_mixer_controls Danny Milosavljevic
2019-01-30 10:39 ` [PATCH v15 6/8] ASoC: sun4i-codec: Add Mic1 Playback Switch, Mic2 Playback Switch Danny Milosavljevic
2019-01-30 10:39 ` [PATCH v15 7/8] ASoC: sun4i-codec: Add FM Playback Volume, FM Left, FM Right, FM " Danny Milosavljevic
2019-02-07 12:15 ` Applied "ASoC: sun4i-codec: Add FM Playback Volume, FM Left, FM Right, FM Playback Switch" to the asoc tree Mark Brown
2019-01-30 10:39 ` [PATCH v15 8/8] ASoC: sun4i-codec: Add Line Playback Volume, Line Boost Volume, Line Right, Line Left, Line Playback Switch Danny Milosavljevic
2019-02-07 12:15 ` Applied "ASoC: sun4i-codec: Add Line Playback Volume, Line Boost Volume, Line Right, Line Left, Line Playback Switch" to the asoc tree Mark Brown
2019-02-06 10:40 ` [PATCH v15 0/8] ASoC: sun4i-codec: Add Line-In, FM-In, Mic 2 Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190130103945.26692-5-dannym@scratchpost.org \
--to=dannym@scratchpost.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.ripard@bootlin.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).