From: Rander Wang <rander.wang@linux.intel.com>
To: broonie@kernel.org
Cc: alsa-devel@alsa-project.org,
pierre-louis.bossart@linux.intel.com,
Rander Wang <rander.wang@linux.intel.com>
Subject: [PATCH 2/3] ASoC:hdac_hda:use correct format to setup hda codec
Date: Fri, 8 Mar 2019 16:38:58 +0800 [thread overview]
Message-ID: <20190308083859.50026-3-rander.wang@linux.intel.com> (raw)
In-Reply-To: <20190308083859.50026-1-rander.wang@linux.intel.com>
The current implementation of the hdac_hda codec results in zero-valued
samples on capture and noise with headset playback when SOF is used on
platforms with an on-board HDaudio codec. This is root-caused to SOF
using be_hw_params_fixup, and the prepare() call using invalid runtime
fields to determine the format.
This patch moves the format handling to the hw_params() callback, as
done already for hdac_hdmi, to make sure the fixed-up information is
taken into account but keeps the codec initialization in prepare() as
the stream_tag is only available at that time. Moving everything in the
prepare() callback is possible but the code is less elegant so this
two-step solution was chosen.
The solution was tested with the SST driver with no regressions, and all
the issues with SOF playback and capture are solved.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
---
sound/soc/codecs/hdac_hda.c | 53 +++++++++++++++++++++++++++++++++------------
sound/soc/codecs/hdac_hda.h | 1 +
2 files changed, 40 insertions(+), 14 deletions(-)
diff --git a/sound/soc/codecs/hdac_hda.c b/sound/soc/codecs/hdac_hda.c
index ffecdaaa8cf2..f889d94c8e3c 100644
--- a/sound/soc/codecs/hdac_hda.c
+++ b/sound/soc/codecs/hdac_hda.c
@@ -38,6 +38,9 @@ static void hdac_hda_dai_close(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai);
static int hdac_hda_dai_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai);
+static int hdac_hda_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai);
static int hdac_hda_dai_hw_free(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai);
static int hdac_hda_dai_set_tdm_slot(struct snd_soc_dai *dai,
@@ -50,6 +53,7 @@ static const struct snd_soc_dai_ops hdac_hda_dai_ops = {
.startup = hdac_hda_dai_open,
.shutdown = hdac_hda_dai_close,
.prepare = hdac_hda_dai_prepare,
+ .hw_params = hdac_hda_dai_hw_params,
.hw_free = hdac_hda_dai_hw_free,
.set_tdm_slot = hdac_hda_dai_set_tdm_slot,
};
@@ -139,6 +143,39 @@ static int hdac_hda_dai_set_tdm_slot(struct snd_soc_dai *dai,
return 0;
}
+static int hdac_hda_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct hdac_hda_priv *hda_pvt;
+ unsigned int format_val;
+ unsigned int maxbps;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ maxbps = dai->driver->playback.sig_bits;
+ else
+ maxbps = dai->driver->capture.sig_bits;
+
+ hda_pvt = snd_soc_component_get_drvdata(component);
+ format_val = snd_hdac_calc_stream_format(params_rate(params),
+ params_channels(params),
+ params_format(params),
+ maxbps,
+ 0);
+ if (!format_val) {
+ dev_err(dai->dev,
+ "invalid format_val, rate=%d, ch=%d, format=%d, maxbps=%d\n",
+ params_rate(params), params_channels(params),
+ params_format(params), maxbps);
+
+ return -EINVAL;
+ }
+
+ hda_pvt->pcm[dai->id].format_val[substream->stream] = format_val;
+ return 0;
+}
+
static int hdac_hda_dai_hw_free(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
@@ -162,10 +199,9 @@ static int hdac_hda_dai_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
+ struct hda_pcm_stream *hda_stream;
struct hdac_hda_priv *hda_pvt;
- struct snd_pcm_runtime *runtime = substream->runtime;
struct hdac_device *hdev;
- struct hda_pcm_stream *hda_stream;
unsigned int format_val;
struct hda_pcm *pcm;
unsigned int stream;
@@ -179,19 +215,8 @@ static int hdac_hda_dai_prepare(struct snd_pcm_substream *substream,
hda_stream = &pcm->stream[substream->stream];
- format_val = snd_hdac_calc_stream_format(runtime->rate,
- runtime->channels,
- runtime->format,
- hda_stream->maxbps,
- 0);
- if (!format_val) {
- dev_err(&hdev->dev,
- "invalid format_val, rate=%d, ch=%d, format=%d\n",
- runtime->rate, runtime->channels, runtime->format);
- return -EINVAL;
- }
-
stream = hda_pvt->pcm[dai->id].stream_tag[substream->stream];
+ format_val = hda_pvt->pcm[dai->id].format_val[substream->stream];
ret = snd_hda_codec_prepare(&hda_pvt->codec, hda_stream,
stream, format_val, substream);
diff --git a/sound/soc/codecs/hdac_hda.h b/sound/soc/codecs/hdac_hda.h
index e444ef593360..6b1bd4f428e7 100644
--- a/sound/soc/codecs/hdac_hda.h
+++ b/sound/soc/codecs/hdac_hda.h
@@ -8,6 +8,7 @@
struct hdac_hda_pcm {
int stream_tag[2];
+ unsigned int format_val[2];
};
struct hdac_hda_priv {
--
2.14.1
next prev parent reply other threads:[~2019-03-08 8:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-08 8:38 [PATCH 0/3] ASoC: hda: capture-related fixes Rander Wang
2019-03-08 8:38 ` [PATCH 1/3] ASoC:soc-pcm:fix a codec fixup issue in TDM case Rander Wang
2019-03-11 17:23 ` Applied "ASoC:soc-pcm:fix a codec fixup issue in TDM case" to the asoc tree Mark Brown
2019-03-08 8:38 ` Rander Wang [this message]
2019-03-08 8:38 ` [PATCH 3/3] ASoC:intel:skl:fix a simultaneous playback & capture issue on hda platform Rander Wang
2019-03-11 17:23 ` Applied "ASoC:intel:skl:fix a simultaneous playback & capture issue on hda platform" to the asoc tree Mark Brown
2019-03-08 15:27 ` [PATCH 0/3] ASoC: hda: capture-related fixes Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190308083859.50026-3-rander.wang@linux.intel.com \
--to=rander.wang@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=pierre-louis.bossart@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).