alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Tzung-Bi Shih <tzungbi@google.com>
To: broonie@kernel.org, tiwai@suse.com
Cc: tzungbi@google.com, alsa-devel@alsa-project.org,
	dgreid@google.com, cychiang@google.com
Subject: [PATCH] ASoC: max98357a: release GPIO when component removing
Date: Tue,  7 May 2019 13:11:40 +0800	[thread overview]
Message-ID: <20190507051140.240245-1-tzungbi@google.com> (raw)

Component's probe() gets GPIO for "sdmode-gpios" via
devm_gpiod_get_optional().  The GPIO binds to the device.

When the component get removed but the device does not, the GPIO
still binds to the device.  Then, when the component be probed
again, devm_gpiod_get_optional() returns EBUSY.

Release the GPIO proactively when component is removing.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
---
 sound/soc/codecs/max98357a.c | 42 ++++++++++++++++++++++++++++--------
 1 file changed, 33 insertions(+), 9 deletions(-)

diff --git a/sound/soc/codecs/max98357a.c b/sound/soc/codecs/max98357a.c
index d037a3e4d323..b11c6cb81f55 100644
--- a/sound/soc/codecs/max98357a.c
+++ b/sound/soc/codecs/max98357a.c
@@ -27,24 +27,28 @@
 #include <sound/soc-dai.h>
 #include <sound/soc-dapm.h>
 
+struct max98357a_priv {
+	struct gpio_desc *sdmode;
+};
+
 static int max98357a_daiops_trigger(struct snd_pcm_substream *substream,
 		int cmd, struct snd_soc_dai *dai)
 {
-	struct gpio_desc *sdmode = snd_soc_dai_get_drvdata(dai);
+	struct max98357a_priv *max98357a = snd_soc_dai_get_drvdata(dai);
 
-	if (!sdmode)
+	if (!max98357a->sdmode)
 		return 0;
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		gpiod_set_value(sdmode, 1);
+		gpiod_set_value(max98357a->sdmode, 1);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		gpiod_set_value(sdmode, 0);
+		gpiod_set_value(max98357a->sdmode, 0);
 		break;
 	}
 
@@ -61,19 +65,31 @@ static const struct snd_soc_dapm_route max98357a_dapm_routes[] = {
 
 static int max98357a_component_probe(struct snd_soc_component *component)
 {
-	struct gpio_desc *sdmode;
+	struct max98357a_priv *max98357a =
+			snd_soc_component_get_drvdata(component);
 
-	sdmode = devm_gpiod_get_optional(component->dev, "sdmode", GPIOD_OUT_LOW);
-	if (IS_ERR(sdmode))
-		return PTR_ERR(sdmode);
+	max98357a->sdmode = devm_gpiod_get_optional(component->dev,
+					"sdmode", GPIOD_OUT_LOW);
+	if (IS_ERR(max98357a->sdmode))
+		return PTR_ERR(max98357a->sdmode);
 
-	snd_soc_component_set_drvdata(component, sdmode);
+	snd_soc_component_set_drvdata(component, max98357a);
 
 	return 0;
 }
 
+static void max98357a_component_remove(struct snd_soc_component *component)
+{
+	struct max98357a_priv *max98357a =
+			snd_soc_component_get_drvdata(component);
+
+	if (max98357a->sdmode)
+		devm_gpiod_put(component->dev, max98357a->sdmode);
+}
+
 static const struct snd_soc_component_driver max98357a_component_driver = {
 	.probe			= max98357a_component_probe,
+	.remove			= max98357a_component_remove,
 	.dapm_widgets		= max98357a_dapm_widgets,
 	.num_dapm_widgets	= ARRAY_SIZE(max98357a_dapm_widgets),
 	.dapm_routes		= max98357a_dapm_routes,
@@ -112,6 +128,14 @@ static struct snd_soc_dai_driver max98357a_dai_driver = {
 
 static int max98357a_platform_probe(struct platform_device *pdev)
 {
+	struct max98357a_priv *max98357a;
+
+	max98357a = devm_kzalloc(&pdev->dev, sizeof(*max98357a), GFP_KERNEL);
+	if (!max98357a)
+		return -ENOMEM;
+
+	dev_set_drvdata(&pdev->dev, max98357a);
+
 	return devm_snd_soc_register_component(&pdev->dev,
 			&max98357a_component_driver,
 			&max98357a_dai_driver, 1);
-- 
2.21.0.1020.gf2820cf01a-goog

             reply	other threads:[~2019-05-07  5:12 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-07  5:11 Tzung-Bi Shih [this message]
2019-05-08  6:33 ` [PATCH] ASoC: max98357a: release GPIO when component removing Mark Brown
2019-05-08  9:27   ` Tzung-Bi Shih
2019-05-08  9:48     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190507051140.240245-1-tzungbi@google.com \
    --to=tzungbi@google.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=cychiang@google.com \
    --cc=dgreid@google.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).