alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
	wens-jdAy2FN1RRM@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
	be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org,
	Marcus Cooper
	<codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v4 7/9] ASoC: sun4i-i2s: Add multichannel functionality
Date: Mon,  3 Jun 2019 19:47:33 +0200	[thread overview]
Message-ID: <20190603174735.21002-8-codekipper@gmail.com> (raw)
In-Reply-To: <20190603174735.21002-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

The i2s block can be used to pass PCM data over multiple channels
and is sometimes used for the audio side of an HDMI connection.

Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 sound/soc/sunxi/sun4i-i2s.c | 121 +++++++++++++++++++-----------------
 1 file changed, 64 insertions(+), 57 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 75217fb52bfa..3549a87ed9e9 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -189,6 +189,7 @@ struct sun4i_i2s {
 
 	unsigned int	tdm_slots;
 	unsigned int	slot_width;
+	unsigned int	offset;
 };
 
 struct sun4i_i2s_clk_div {
@@ -358,56 +359,71 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 	int lines;
 
 	channels = params_channels(params);
-	if ((channels > dai->driver->playback.channels_max) ||
-		(channels < dai->driver->playback.channels_min)) {
-		dev_err(dai->dev, "Unsupported number of channels: %d\n",
-			channels);
-		return -EINVAL;
-	}
-
-	lines = (channels + 1) / 2;
-
-	/* Enable the required output lines */
-	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
-			   SUN4I_I2S_CTRL_SDO_EN_MASK,
-			   SUN4I_I2S_CTRL_SDO_EN(lines));
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if ((channels > dai->driver->playback.channels_max) ||
+			(channels < dai->driver->playback.channels_min)) {
+			dev_err(dai->dev, "Unsupported number of channels: %d\n",
+				channels);
+			return -EINVAL;
+		}
 
-	if (i2s->variant->is_h3_i2s_based) {
-		regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
-				   SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM_MASK,
-				   SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM(channels));
-		regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
-				   SUN8I_I2S_CHAN_CFG_RX_SLOT_NUM_MASK,
-				   SUN8I_I2S_CHAN_CFG_RX_SLOT_NUM(channels));
-	}
+		lines = (channels + 1) / 2;
 
-	/* Map the channels for playback and capture */
-	regmap_field_write(i2s->field_rxchanmap, 0x00003210);
-	regmap_field_write(i2s->field_txchanmap, 0x10);
-	if (i2s->variant->is_h3_i2s_based) {
-		if (channels > 2)
-			regmap_write(i2s->regmap,
-				     SUN8I_I2S_TX_CHAN_MAP_REG+4, 0x32);
-		if (channels > 4)
-			regmap_write(i2s->regmap,
-				     SUN8I_I2S_TX_CHAN_MAP_REG+8, 0x54);
-		if (channels > 6)
-			regmap_write(i2s->regmap,
-				     SUN8I_I2S_TX_CHAN_MAP_REG+12, 0x76);
+		/* Enable the required output lines */
+		regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
+				   SUN4I_I2S_CTRL_SDO_EN_MASK,
+				   SUN4I_I2S_CTRL_SDO_EN(lines));
+
+		if (i2s->variant->is_h3_i2s_based)
+			regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
+					   SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM_MASK,
+					   SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM(channels));
+
+		regmap_field_write(i2s->field_txchanmap, 0x10);
+		/* Configure the channels */
+		regmap_field_write(i2s->field_txchansel, SUN4I_I2S_CHAN_SEL(2));
+
+		if (i2s->variant->is_h3_i2s_based) {
+			u32 chan_sel = SUN8I_I2S_TX_CHAN_OFFSET(i2s->offset) | 0x1;
+			regmap_write(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
+				     chan_sel | 0x30);
+
+			if (channels > 2) {
+				regmap_write(i2s->regmap,
+					     SUN8I_I2S_TX_CHAN_MAP_REG+4, 0x32);
+				regmap_write(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG+4,
+					     chan_sel | 0x30);
+			}
+			if (channels > 4) {
+				regmap_write(i2s->regmap,
+					     SUN8I_I2S_TX_CHAN_MAP_REG+8, 0x54);
+				regmap_write(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG+8,
+					     chan_sel | 0x30);
+			}
+			if (channels > 6) {
+				regmap_write(i2s->regmap,
+					     SUN8I_I2S_TX_CHAN_MAP_REG+12, 0x76);
+				regmap_write(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG+12,
+					     chan_sel | 0x30);
+			}
+		}
+	} else {
+		/* Map the channels for capture */
+		regmap_field_write(i2s->field_rxchanmap, 0x00003210);
+		regmap_field_write(i2s->field_rxchansel,
+				   SUN4I_I2S_CHAN_SEL(params_channels(params)));
+
+		if (i2s->variant->is_h3_i2s_based) {
+			regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
+					   SUN8I_I2S_CHAN_CFG_RX_SLOT_NUM_MASK,
+					   SUN8I_I2S_CHAN_CFG_RX_SLOT_NUM(channels));
+
+			regmap_update_bits(i2s->regmap, SUN8I_I2S_RX_CHAN_SEL_REG,
+					   SUN8I_I2S_TX_CHAN_OFFSET_MASK,
+					   SUN8I_I2S_TX_CHAN_OFFSET(i2s->offset));
+		}
 	}
 
-	/* Configure the channels */
-	regmap_field_write(i2s->field_txchansel,
-			   SUN4I_I2S_CHAN_SEL(params_channels(params)));
-
-	regmap_field_write(i2s->field_rxchansel,
-			   SUN4I_I2S_CHAN_SEL(params_channels(params)));
-
-	if (i2s->variant->is_h3_i2s_based)
-		regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
-				   SUN8I_I2S_TX_CHAN_EN_MASK,
-				   SUN8I_I2S_TX_CHAN_EN(channels));
-
 	switch (params_physical_width(params)) {
 	case 16:
 		width = DMA_SLAVE_BUSWIDTH_2_BYTES;
@@ -445,7 +461,6 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
 	u32 val;
-	u32 offset = 0;
 	u32 bclk_polarity = SUN4I_I2S_FMT0_POLARITY_NORMAL;
 	u32 lrclk_polarity = SUN4I_I2S_FMT0_POLARITY_NORMAL;
 
@@ -453,7 +468,7 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
 		val = SUN4I_I2S_FMT0_FMT_I2S;
-		offset = 1;
+		i2s->offset = 1;
 		break;
 	case SND_SOC_DAIFMT_LEFT_J:
 		val = SUN4I_I2S_FMT0_FMT_LEFT_J;
@@ -474,16 +489,8 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		 * i2s shares the same setting with the LJ format. Increment
 		 * val so that the bit to value to write is correct.
 		 */
-		if (offset > 0)
+		if (i2s->offset > 0)
 			val++;
-		/* blck offset determines whether i2s or LJ */
-		regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
-				   SUN8I_I2S_TX_CHAN_OFFSET_MASK,
-				   SUN8I_I2S_TX_CHAN_OFFSET(offset));
-
-		regmap_update_bits(i2s->regmap, SUN8I_I2S_RX_CHAN_SEL_REG,
-				   SUN8I_I2S_TX_CHAN_OFFSET_MASK,
-				   SUN8I_I2S_TX_CHAN_OFFSET(offset));
 	}
 
 	regmap_field_write(i2s->field_fmt_mode, val);
-- 
2.21.0

  parent reply	other threads:[~2019-06-03 17:47 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-03 17:47 [PATCH v4 0/9]ASoC: sun4i-i2s: Updates to the driver codekipper-Re5JQEeQqe8AvxtiuMwx3w
     [not found] ` <20190603174735.21002-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-06-03 17:47   ` [PATCH v4 1/9] ASoC: sun4i-i2s: Fix sun8i tx channel offset mask codekipper-Re5JQEeQqe8AvxtiuMwx3w
     [not found]     ` <20190603174735.21002-2-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-06-04  7:34       ` Maxime Ripard
2019-06-04  7:38         ` Chen-Yu Tsai
2019-06-04  8:15           ` [linux-sunxi] " Code Kipper
2019-06-04 14:58     ` Applied "ASoC: sun4i-i2s: Fix sun8i tx channel offset mask" to the asoc tree Mark Brown
2019-06-03 17:47   ` [PATCH v4 2/9] ASoC: sun4i-i2s: Add offset to RX channel select codekipper-Re5JQEeQqe8AvxtiuMwx3w
     [not found]     ` <20190603174735.21002-3-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-06-04  7:36       ` Maxime Ripard
2019-06-04  7:39         ` Chen-Yu Tsai
2019-06-04 14:58     ` Applied "ASoC: sun4i-i2s: Add offset to RX channel select" to the asoc tree Mark Brown
2019-06-03 17:47   ` [PATCH v4 4/9] ASoC: sun4i-i2s: Reduce quirks for sun8i-h3 codekipper-Re5JQEeQqe8AvxtiuMwx3w
     [not found]     ` <20190603174735.21002-5-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-06-04  7:46       ` Maxime Ripard
2019-06-04  9:33         ` Code Kipper
2019-06-03 17:47   ` [PATCH v4 5/9] ASoC: sun4i-i2s: Add set_tdm_slot functionality codekipper-Re5JQEeQqe8AvxtiuMwx3w
     [not found]     ` <20190603174735.21002-6-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-06-04  7:49       ` Maxime Ripard
2019-06-03 17:47   ` [PATCH v4 6/9] ASoC: sun4i-i2s: Add multi-lane functionality codekipper-Re5JQEeQqe8AvxtiuMwx3w
     [not found]     ` <20190603174735.21002-7-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-06-04  7:58       ` Maxime Ripard
2019-06-04  8:43         ` Code Kipper
     [not found]           ` <CAEKpxB=RdYF9eEvAJ+R7sT6OtdtBWjhMM1am+EhaN=9ZO9Gd2A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-06-04  9:02             ` Christopher Obbard
     [not found]               ` <CAP03XepJVPge5sz4WcmK8pp2jHAPJdGb6v6A3R0DzSf5O6qj-g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-06-04  9:38                 ` Code Kipper
     [not found]                   ` <CAEKpxBmxAQKgDhvjpczAWwNtNhYRs07wjMSnr8nqHk1XxMT=nw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-07-30 17:57                     ` Jernej Škrabec
2019-07-31 12:29                       ` Maxime Ripard
2019-08-01  5:31                         ` [linux-sunxi] " Jernej Škrabec
2019-08-06  6:22                           ` Chen-Yu Tsai
     [not found]                             ` <CAGb2v66D4-QvWYPXE=rf6Zv93X1LjnxUgpk+5wdAL_b7MM3vaA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-08-12 10:02                               ` Maxime Ripard
2019-06-03 17:47   ` codekipper-Re5JQEeQqe8AvxtiuMwx3w [this message]
2019-06-03 17:47   ` [PATCH v4 8/9] ASoc: sun4i-i2s: Add 20, 24 and 32 bit support codekipper-Re5JQEeQqe8AvxtiuMwx3w
     [not found]     ` <20190603174735.21002-9-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-06-04  8:19       ` Maxime Ripard
2019-06-03 17:47   ` [PATCH v4 9/9] ASoC: sun4i-i2s: Adjust regmap settings codekipper-Re5JQEeQqe8AvxtiuMwx3w
     [not found]     ` <20190603174735.21002-10-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-06-04  8:21       ` Maxime Ripard
2019-06-03 17:47 ` [PATCH v4 3/9] ASoC: sun4i-i2s: Add regmap field to sign extend sample codekipper
     [not found]   ` <20190603174735.21002-4-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-06-04  7:43     ` Maxime Ripard
2019-06-04  7:53   ` [linux-sunxi] " Chen-Yu Tsai
2019-06-04 11:46     ` Code Kipper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190603174735.21002-8-codekipper@gmail.com \
    --to=codekipper-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
    --cc=be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=wens-jdAy2FN1RRM@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).