Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Curtis Malainey <cujomalainey@chromium.org>
Cc: Oder Chiou <oder_chiou@realtek.com>,
	alsa-devel@alsa-project.org, Takashi Iwai <tiwai@suse.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Bard Liao <bardliao@realtek.com>
Subject: [alsa-devel] Applied "ASoC: rt5677: Remove magic number register writes" to the asoc tree
Date: Mon,  9 Sep 2019 11:07:16 +0100 (BST)	[thread overview]
Message-ID: <20190909100716.03E2FD02D18@fitzroy.sirena.org.uk> (raw)
In-Reply-To: <20190906194636.217881-2-cujomalainey@chromium.org>

The patch

   ASoC: rt5677: Remove magic number register writes

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 33b773dc9288eb15d3216628d1d2381103d854a9 Mon Sep 17 00:00:00 2001
From: Curtis Malainey <cujomalainey@chromium.org>
Date: Fri, 6 Sep 2019 12:46:23 -0700
Subject: [PATCH] ASoC: rt5677: Remove magic number register writes

In order to simplify understanding what register values are being
written to the codec for debugging more advanced features (such as
hotwording) it is best to remove magic numbers

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20190906194636.217881-2-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/codecs/rt5677.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index c779dc3474f9..5b6ca3ced13b 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -691,10 +691,12 @@ static void rt5677_set_dsp_mode(struct snd_soc_component *component, bool on)
 	struct rt5677_priv *rt5677 = snd_soc_component_get_drvdata(component);
 
 	if (on) {
-		regmap_update_bits(rt5677->regmap, RT5677_PWR_DSP1, 0x2, 0x2);
+		regmap_update_bits(rt5677->regmap, RT5677_PWR_DSP1,
+			RT5677_PWR_DSP, RT5677_PWR_DSP);
 		rt5677->is_dsp_mode = true;
 	} else {
-		regmap_update_bits(rt5677->regmap, RT5677_PWR_DSP1, 0x2, 0x0);
+		regmap_update_bits(rt5677->regmap, RT5677_PWR_DSP1,
+			RT5677_PWR_DSP, 0x0);
 		rt5677->is_dsp_mode = false;
 	}
 }
@@ -4466,7 +4468,8 @@ static int rt5677_set_bias_level(struct snd_soc_component *component,
 
 			regmap_update_bits(rt5677->regmap, RT5677_PWR_ANLG1,
 				RT5677_LDO1_SEL_MASK | RT5677_LDO2_SEL_MASK,
-				0x0055);
+				5 << RT5677_LDO1_SEL_SFT |
+				5 << RT5677_LDO2_SEL_SFT);
 			regmap_update_bits(rt5677->regmap,
 				RT5677_PR_BASE + RT5677_BIAS_CUR4,
 				0x0f00, 0x0f00);
@@ -4491,7 +4494,9 @@ static int rt5677_set_bias_level(struct snd_soc_component *component,
 		regmap_update_bits(rt5677->regmap, RT5677_DIG_MISC, 0x1, 0x0);
 		regmap_write(rt5677->regmap, RT5677_PWR_DIG1, 0x0000);
 		regmap_write(rt5677->regmap, RT5677_PWR_DIG2, 0x0000);
-		regmap_write(rt5677->regmap, RT5677_PWR_ANLG1, 0x0022);
+		regmap_write(rt5677->regmap, RT5677_PWR_ANLG1,
+			2 << RT5677_LDO1_SEL_SFT |
+			2 << RT5677_LDO2_SEL_SFT);
 		regmap_write(rt5677->regmap, RT5677_PWR_ANLG2, 0x0000);
 		regmap_update_bits(rt5677->regmap,
 			RT5677_PR_BASE + RT5677_BIAS_CUR4, 0x0f00, 0x0000);
@@ -4719,7 +4724,8 @@ static int rt5677_probe(struct snd_soc_component *component)
 
 	regmap_update_bits(rt5677->regmap, RT5677_DIG_MISC,
 			~RT5677_IRQ_DEBOUNCE_SEL_MASK, 0x0020);
-	regmap_write(rt5677->regmap, RT5677_PWR_DSP2, 0x0c00);
+	regmap_write(rt5677->regmap, RT5677_PWR_DSP2,
+			RT5677_PWR_SLIM_ISO | RT5677_PWR_CORE_ISO);
 
 	for (i = 0; i < RT5677_GPIO_NUM; i++)
 		rt5677_gpio_config(rt5677, i, rt5677->pdata.gpio_config[i]);
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  reply	other threads:[~2019-09-09 10:35 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06 19:46 [alsa-devel] [RFC 00/15] Add Samus Hotwording for RT5677 Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 01/15] ASoC: rt5677: Remove magic number register writes Curtis Malainey
2019-09-09 10:07   ` Mark Brown [this message]
2019-09-06 19:46 ` [alsa-devel] [RFC 02/15] ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFF Curtis Malainey
2019-09-09  9:54   ` Mark Brown
2019-09-09 15:50     ` Curtis Malainey
2019-09-09 12:23   ` [alsa-devel] Applied "ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFF" to the asoc tree Mark Brown
2019-09-06 19:46 ` [alsa-devel] [RFC 03/15] ASoC: rt5677: Add a PCM device for streaming hotword via SPI Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 04/15] ASoC: rt5677: Load firmware " Curtis Malainey
2019-09-11 10:24   ` Mark Brown
2019-09-06 19:46 ` [alsa-devel] [RFC 05/15] ASoC: rt5677: Auto enable/disable DSP for hotwording Curtis Malainey
2019-09-11 10:25   ` Mark Brown
2019-09-11 20:22     ` Curtis Malainey
2019-09-12  9:26       ` Mark Brown
2019-09-16 21:29         ` Curtis Malainey
2019-09-16 21:55           ` Mark Brown
2019-09-06 19:46 ` [alsa-devel] [RFC 06/15] ASoC: bdw-rt5677: Add a DAI link for rt5677 SPI PCM device Curtis Malainey
2019-09-09  0:18   ` Kuninori Morimoto
2019-09-09 16:53     ` Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 07/15] ASoC: rt5677: Enable jack detect while DSP is running Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 08/15] ASoC: rt5677: Use delayed work for DSP firmware load Curtis Malainey
2019-09-11 10:28   ` Mark Brown
2019-09-06 19:46 ` [alsa-devel] [RFC 09/15] ASoC: rt5677: Add DAPM audio path for hotword stream Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 10/15] ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatile Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 11/15] ASoC: rt5677: Stop and restart DSP over suspend/resume Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 12/15] ASoC: rt5677: Transfer one period at a time over SPI Curtis Malainey
2019-09-11 10:54   ` Mark Brown
2019-09-11 18:09     ` Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 13/15] ASoC: rt5677: Disable irq at suspend Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 14/15] ASoC: rt5677: Allow VAD to be shut on/off at all times Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 15/15] ASoC: rt5677: Turn on MCLK1 for DSP via DAPM Curtis Malainey
2019-09-06 20:40 ` [alsa-devel] [RFC 00/15] Add Samus Hotwording for RT5677 Pierre-Louis Bossart
2019-09-06 21:09   ` Curtis Malainey
2019-09-06 22:13     ` Pierre-Louis Bossart
2019-09-09 16:52       ` Curtis Malainey

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190909100716.03E2FD02D18@fitzroy.sirena.org.uk \
    --to=broonie@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=bardliao@realtek.com \
    --cc=cujomalainey@chromium.org \
    --cc=lgirdwood@gmail.com \
    --cc=oder_chiou@realtek.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox