From: Kai Vehmanen <kai.vehmanen@linux.intel.com>
To: alsa-devel@alsa-project.org, tiwai@suse.de
Cc: libin.yang@intel.com, pierre-louis.bossart@linux.intel.com,
kai.vehmanen@linux.intel.com
Subject: [alsa-devel] [PATCH v6 1/9] ALSA: hda/hdmi - implement mst_no_extra_pcms flag
Date: Fri, 11 Oct 2019 14:27:37 +0300 [thread overview]
Message-ID: <20191011112745.25800-2-kai.vehmanen@linux.intel.com> (raw)
In-Reply-To: <20191011112745.25800-1-kai.vehmanen@linux.intel.com>
To support the DP-MST multiple streams via single connector feature,
the HDMI driver was extended with the concept of backup PCMs. See
commit 9152085defb6 ("ALSA: hda - add DP MST audio support").
This implementation works fine with snd_hda_intel.c as PCM topology
is fully managed within the single driver.
When the HDA codec driver is used from ASoC components, the concept
of backup PCMs no longer fits. For ASoC topologies, the physical
HDMI converters are presented as backend DAIs and these should match
with hardware capabilities. The ASoC topology may define arbitrary
PCMs (i.e. frontend DAIs) and have processing elements before eventual
routing to the HDMI BE DAIs. With backup PCMs, the link between
FE and BE DAIs would become dynamic and change when monitors are
(un)plugged. This would lead to modifying the topology every time
hotplug events happen, which is not currently possible in ASoC and
there does not seem to be any obvious benefits from this design.
To overcome above problems and enable the HDMI driver to be used
from ASoC, this patch adds a new mode (mst_no_extra_pcms flags) to
patch_hdmi.c. In this mode, the codec driver does not assume
the backup PCMs to be created.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
include/sound/hda_codec.h | 1 +
sound/pci/hda/patch_hdmi.c | 19 ++++++++++++++-----
2 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h
index 9a0393cf024c..ac18f428eda6 100644
--- a/include/sound/hda_codec.h
+++ b/include/sound/hda_codec.h
@@ -254,6 +254,7 @@ struct hda_codec {
unsigned int force_pin_prefix:1; /* Add location prefix */
unsigned int link_down_at_suspend:1; /* link down at runtime suspend */
unsigned int relaxed_resume:1; /* don't resume forcibly for jack */
+ unsigned int mst_no_extra_pcms:1; /* no backup PCMs for DP-MST */
#ifdef CONFIG_PM
unsigned long power_on_acct;
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index bca5de78e9ad..59aaee4a40fd 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2072,15 +2072,24 @@ static bool is_hdmi_pcm_attached(struct hdac_device *hdac, int pcm_idx)
static int generic_hdmi_build_pcms(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
- int idx;
+ int idx, pcm_num;
/*
* for non-mst mode, pcm number is the same as before
- * for DP MST mode, pcm number is (nid number + dev_num - 1)
- * dev_num is the device entry number in a pin
- *
+ * for DP MST mode without extra PCM, pcm number is same
+ * for DP MST mode with extra PCMs, pcm number is
+ * (nid number + dev_num - 1)
+ * dev_num is the device entry number in a pin
*/
- for (idx = 0; idx < spec->num_nids + spec->dev_num - 1; idx++) {
+
+ if (codec->mst_no_extra_pcms)
+ pcm_num = spec->num_nids;
+ else
+ pcm_num = spec->num_nids + spec->dev_num - 1;
+
+ codec_dbg(codec, "hdmi: pcm_num set to %d\n", pcm_num);
+
+ for (idx = 0; idx < pcm_num; idx++) {
struct hda_pcm *info;
struct hda_pcm_stream *pstr;
--
2.17.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2019-10-11 11:29 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-11 11:27 [alsa-devel] [PATCH v6 0/9] adapt SOF to use snd-hda-codec-hdmi Kai Vehmanen
2019-10-11 11:27 ` Kai Vehmanen [this message]
2019-10-11 11:27 ` [alsa-devel] [PATCH v6 2/9] ASoC: hdac_hda: add support for HDMI/DP as a HDA codec Kai Vehmanen
2019-10-11 11:27 ` [alsa-devel] [PATCH v6 3/9] ASoC: Intel: skl-hda-dsp-generic: use snd-hda-codec-hdmi Kai Vehmanen
2019-10-17 8:06 ` Takashi Iwai
2019-10-22 11:15 ` Kai Vehmanen
2019-10-11 11:27 ` [alsa-devel] [PATCH v6 4/9] ASoC: Intel: skl-hda-dsp-generic: fix include guard name Kai Vehmanen
2019-10-11 11:27 ` [alsa-devel] [PATCH v6 5/9] ASoC: SOF: Intel: add support for snd-hda-codec-hdmi Kai Vehmanen
2019-10-11 14:00 ` Pierre-Louis Bossart
2019-10-11 14:10 ` Kai Vehmanen
2019-10-17 7:58 ` Takashi Iwai
2019-10-17 13:20 ` Pierre-Louis Bossart
2019-10-22 11:19 ` Kai Vehmanen
2019-10-22 13:17 ` Pierre-Louis Bossart
2019-10-11 11:27 ` [alsa-devel] [PATCH v6 6/9] ASoC: Intel: bxt-da7219-max98357a: common hdmi codec support Kai Vehmanen
2019-10-11 11:27 ` [alsa-devel] [PATCH v6 7/9] ASoC: Intel: glk_rt5682_max98357a: " Kai Vehmanen
2019-10-11 11:27 ` [alsa-devel] [PATCH v6 8/9] ASoC: intel: sof_rt5682: " Kai Vehmanen
2019-10-11 11:27 ` [alsa-devel] [PATCH v6 9/9] ASoC: Intel: bxt_rt298: " Kai Vehmanen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191011112745.25800-2-kai.vehmanen@linux.intel.com \
--to=kai.vehmanen@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=libin.yang@intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox